Sharif Digital Repository

Nanostructured CoTiO3 thin films and powders were prepared by a straightforward aqueous particulate sol–gel route. Titanium(IV) isopropoxide and cobalt chloride were used as titanium and cobalt precursors, respectively. Also, hydroxypropyl cellulose was used as a polymeric fugitive agent in order to increase the specific surface area. The effect of Co:Ti molar ratio and annealing temperature were studied on the crystallization behavior and chemical properties of the products. X-ray diffraction and Fourier transform infrared spectroscopy revealed that the powders crystallized at the low annealing temperature of 300 °C for 1 h, containing anatase-TiO2,... 

In this study, the effects of pulse current mode on corrosion resistance and mechanical properties of anodized coatings were explored. Thickness and hardness measurements, polarization and electrochemical impedance spectroscopy were employed to take mechanical and corrosion behaviors of the anodized coatings into consideration. Also, field-emission scanning electron microscopy (FE-SEM) was utilized to characterize the surface morphology of the coatings. It was shown that in short anodizing times, coating thickness is controlled by the heat concentrated on coating. Although at prolonged anodizing times, the coating thickness is affected by average current density. Hardness measurements showed... 

In this paper, the optimal sampling strategies (uniform or nonuniform) and distortion tradeoffs for stationary bandlimited periodic signals are studied. We justify and use both the average and variance of distortion as the performance criteria. To compute the optimal distortion, one needs to find the optimal sampling locations, as well as the optimal pre-sampling filter. A complete characterization of the optimal distortion for the rates lower than half the Landau rate is provided. It is shown that nonuniform sampling outperforms uniform sampling. In addition, this nonuniform sampling is robust with respect to missing samples. Next, for the rates higher than half the Landau rate, we find... 

The results of an experimental investigation on some engineered infilled frames with high ductility and adjustable strength are presented in this paper. To achieve an engineered infilled frame, an element is added to the infill, called Frictional Sliding Fuses (FSFs). The fuse acts before infill corner crushing and controls the infill so that it is not overloaded. Consequently, it increases the deformation capacity and decreases the strength deterioration. An FSF has a frictional nature, based on which the infill has more appropriate hysteresis cycles, leading to more structural energy damping during earthquakes. The results show that the engineered infilled frames have adjustable strength,... 

Some factors like environmental conditions and manufacturing errors affect performance of a MEMS rate gyroscope. Because they may result to parameter mismatch between the designed gyroscope and the fabricated one. The Parametrically excited gyros are more robust to these changes than the harmonically excited gyros. However, these types of gyros also experience reduction in their accuracy in angular velocity determination due to these changes. One of parameters that affect the accuracy of the gyroscope is quadrature error that here, its effect in the accuracy of angular velocity determination is investigated in two typically designed harmonically and parametrically excited MEMS gyroscopes.... 

In this paper, the optimal sampling strategies (uniform or nonuniform) and distortion tradeoffs for Gaussian bandlimited periodic signals with additive white Gaussian noise are studied. Our emphasis is on characterizing the optimal sampling locations as well as the optimal pre-sampling filter to minimize the reconstruction distortion. We first show that to achieve the optimal distortion, no pre-sampling filter is necessary for any arbitrary sampling rate. Then, we provide a complete characterization of optimal distortion for low and high sampling rates (with respect to the signal bandwidth). We also provide bounds on the reconstruction distortion for rates in the intermediate region. It is... 

In this paper, the optimal sampling strategies (uniform or nonuniform) and distortion tradeoffs for Gaussian bandlimited periodic signals with additive white Gaussian noise are studied. Our emphasis is on characterizing the optimal sampling locations as well as the optimal presampling filter to minimize the reconstruction distortion. We first show that to achieve the optimal distortion, no presampling filter is necessary for any arbitrary sampling rate. Then, we provide a complete characterization of optimal distortion for low and high sampling rates (with respect to the signal bandwidth). We also provide bounds on the reconstruction distortion for rates in the intermediate region. It is... 

A facile hydrothermal method and subsequent electroactivation have been developed to fabricate three-dimensional (3D) CuO nanosheet arrays on the copper foil substrate, which can be used directly as a binder-free electrode for supercapacitor applications. Under optimum conditions, by using this facile method, a high capacitance of 125 mF/cm2 at a current density of 0.3 mA/cm2 is obtained. The prepared supercapacitor showed a good rate capability (46.4% capacitance retention, when the current density is increased to more than 30 times) and an excellent cyclability (more than 88% capacitance retention after 3000 cycles). © 2017 Elsevier B.V  

In this work, a chemometrics-based strategy is developed for quantitative mass spectrometry imaging (MSI). In this regard, quantification of chlordecone as a carcinogenic organochlorinated pesticide (C10Cll0O) in mouse liver using the matrix-assisted laser desorption ionization MSI (MALDI-MSI) method is used as a case study. The MSI datasets corresponded to 1, 5 and 10 days of mouse exposure to the standard chlordecone in the quantity range of 0 to 450 μg g-1. The binning approach in the m/z direction is used to group high resolution m/z values and to reduce the big data size. To consider the effect of bin size on the quality of results, three different bin sizes of 0.25, 0.5 and 1.0 were... 

MEMS rate gyroscopes are prone to different errors because of environmental conditions and manufacturing errors. These errors can result to mismatch between the fabricated gyros and the designed ones. Different environmental conditions and disturbances can change the parameters and specifications of a gyro, and its sensitivity may deteriorate, since the parameters are different from the optimal ones. External linear acceleration is one of the main environmental disturbances that may change the behavior of an MEMS rate gyro that its effect on the accuracy of an MEMS proof mass gyroscope is found here. This is done by finding the equations of motion of gyroscope in presence of acceleration and... 

Titanium dioxide is prepared by sol gel method from titanium tetraisopropoxide (TTIP) as precursor and likewise zinc oxide is prepared by sol gel method from zinc acetate dehydrate (ZAD) as precursor. The composite sols are prepared in three different molar ratios 90TiO2:10ZnO, 70TiO2:30ZnO and 50TiO2:50ZnO. Thin film deposition is carried out by dip coating technique. Crystal structure, surface morphology and photocatalytic activity of the prepared nanocomposite thin films are investigated. The antibacterial activity of the prepared nanocomposite thin film against E-coli ATCC 25922 bacteria is examined by placing the thin film in standard aqueous E-coli medium under UV light for 1, 2, 3 and... 

This paper presents a simple yet efficient method for an anomaly-based Intrusion Detection System (IDS). In reality, IDSs can be defined as a one-class classification system, where the normal traffic is the target class. The high diversity of network attacks in addition to the need for generalization, motivate us to propose a semi-supervised method. Inspired by the successes of Generative Adversarial Networks (GANs) for training deep models in semi-unsupervised setting, we have proposed an end-to-end deep architecture for IDS. The proposed architecture is composed of two deep networks, each of which trained by competing with each other to understand the underlying concept of the normal...