Sharif Digital Repository

The ZnO nanowires have been synthesized using vapor-liquid-solid (VLS) process on Au catalyst thin film deposited on different substrates including Si(1 0 0), epi-Si(1 0 0), quartz and alumina. The influence of surface roughness of different substrates and two different environments (Ar + H2 and N2) on formation of ZnO nanostructures was investigated. According to AFM observations, the degree of surface roughness of the different substrates is an important factor to form Au islands for growing ZnO nanostructures (nanowires and nanobelts) with different diameters and lengths. Si substrate (without epi-taxy layer) was found that is the best substrate among Si (with epi-taxy layer), alumina and... 

Bromophenols are known as antioxidant radical scavengers for some biomolecules such as those in marine red alga. Full understanding of the role played by bromophenols requires detailed knowledge of the radical scavenging activities in probable pathways, a focus of ongoing research. To gain detailed insight into two suggested pathways, H-atom transfer and electron transfer, theoretical studies employing first principle quantum mechanical calculations have been carried out on selected bromophenols. Detailed investigation of the aforementioned routes revealed that upon H-atom abstraction or the electron transfer process, bromophenols cause an increase in radical species in which the unpaired... 

In this study, ionic liquids formed between 1-ethyl-3-methylimidazolium cation ([emim]+) and alkyltrifluoroborate ([RBF3]-, R = n-CmH2m+1 (m = 1-5)) anions have been investigated theoretically. The interactions between the cation and anions have also been calculated at the MP2/6-311++G(d,p)//B3LYP/6-311++G(d,p) level of theory. The calculated interaction energies were found to decrease in magnitude with the increase of side-chain length in anions. The results of energy decomposition analysis (EDA) show that the interaction of these anions with [emim]+ cation is electrostatic in the nature and the side chain length in the anions has an important effect on the contribution of ΔEelect term. The... 

In this research, initially anodization process was used to fabricate ZnO nanorods on Zn substrate and then RF sputtering technique was applied to grow a thin layer of polytetrafluoroethylene (PTFE, Teflon) on the coated ZnO nanorods for producing a superhydrophobic surface. According to scanning electron microscopy (SEM) observations, ZnO nanorods were formed with average diameter and length of about ∼180 nm and 14 μm, respectively. Superhydrophilic property of ZnO nanorods and superhydrophobic property of PTFE/ZnO nanorods was investigated by water contact angle (WCA) measurements. It was found that the contact angle varied with the PTFE deposition time. The highest contact angle... 

Barium strontium titanate (BST) was prepared via the simple sol-gel method by using tetrabutyl ti-tanate, ethanol, citric acid and ethylene glycol as starting materials. Thermogravimetry and differential thermal analysis were used to examine the behaviour of the xerogel. The particle size of BST was approximately 21 nm, as calculated by the X-ray diffraction and confirmed by transition electron microscopy for the calcination temperature of 750 °C. It was found that the particles of BST powders calcined at 750 °C were smaller and more homogeneous and uniform than those obtained at 800 °C  

Local scour around complex piers under steady clear-water condition was studied experimentally for a variety of configuration, including different sizes and shapes of complex piers. A total of 70 experiments were carried out. Three sets of experiments were performed over the entire range of possible pile cap elevations for complex piers with different geometrical characteristics. The collected data are used to quantify the pile cap elevations that maximize or minimize the local scour depth. Some of the available methodologies to estimate the maximum local scour depth around such complex piers are evaluated. The predictions of the scour depths improved by using the revised methods of... 

In this study synthesis of a drug delivery system (DDS) is described which has several merits over its counterparts. In order to synthesize this nano-carrier, graphene oxide nano-sheets are used to accommodate MCM-41 nanoparticles. Furthermore Fe3O4 nanoparticles are introduced to this nano-material to produce a traceable nanoparticle. Since cancerous tissues have lower pH than healthy tissues, pH-sensitive oligomers are attached to this nano-material. Finally the nano-carrier is wrapped by a biocompatible shell (PEGylated sodium alginate); this polymeric shell makes the DDS capable of a more controllable drug release. By measuring in vitro situation, ‘loading content%’... 

Energy and environment crises motivated scientists to develop sustainable, renewable, and clean energy resources mainly based on solar hydrogen. For this purpose, one main challenge is the low cost flexible substrates for designing earth abundant efficient cocatalysts to reduce required water oxidation overpotential. Here, a systematic morphological and electrochemical study has been reported for cobalt oxide/hydroxide nanoflakes simply electrodeposited on four different commercially available substrates, titanium, copper sheet, steel mesh, and nickel foam. Remarkable dependence between the used substrate, morphology, and electrocatalytic properties of nanoflakes introduced flexible porous... 

Transmission line formulation is used to analyze two-dimensional low-loss metallic gratings at optical frequencies when plasmonic waves propagate in the structure. This method, like the Fourier modal method, suffers from numerical instabilities when applied to such structures. A systematic approach to avoid these instabilities is presented. These numerical artifacts are attributed to the violation of Li's inverse rule and the appearance of higher-order spurious modes. In this paper, a new approach is proposed to identify and to greatly reduce the effect of these spurious modes based on the accuracy by which these modes are satisfying the conservation of momentum. Furthermore, the proposed... 

In this work, we compared formation and properties of heat-treated Ag nanoparticles in silica matrix synthesized by RF- reactive magnetron cosputtering and sol-gel methods separately. The sol-gel and sputtered films were annealed at different temperatures in air and in a reduced environment, respectively. The optical UV-visible Spectrophotometry have shown that the absorption peak appears at 456 and 400 nm wavelength indicating formation of silver nanoparticles in SiO2 matrix for both the sol -gel and sputtering methods at 100 and 800 °C, respectively. XPS measurements showed that the metallic Ag0 nanoparticles can be obtained from both the techniques at these temperatures. According to XPS... 

Dynamic nature of mobile ad hoc networks combined with their lack of centralized infrastructure make security problem the most challenging issue in such networks. The main contribution of this paper is to propose a secure and efficient key management algorithm, able to satisfying the requirement of such networks and facing their specific characteristics. The proposed algorithm is a fully distributed ID-based system which is built based on elliptic curve cryptography. The main advantage of the proposed algorithm, that gives it the superiority in its field of research, is the improvement of the performance and the security strength together. The proposed algorithm is implemented with much... 

The effects of resin type and content as well as graphite content on physical and mechanical properties of MgO-C refractories, such as density, porosity and strength were studied. The samples were formulated with various amounts of graphite and resin, and their oxidation behavior was isothermally investigated using a thermo gravimeter (TG), in air and at a temperature ranges from 900 to 1300 °C. The results indicated that, low-viscosity resins improved compressibility, but it degraded the strength. Higher resin content also improved the compressibility, but it caused higher porosity after preheating at 600 °C. The results also showed that the porosity and density of tempered samples were... 

CuSO4/SiO2 is found to be an efficient and selective medium for the acetalization of aldehydes in the presence of ketones in solvent-free conditions under microwave irradiation. © 2005 Bentham Science Publishers Ltd  

The effects of graphite content on the density and oxidation behavior of MgO-C refractory samples were studied. The samples were formulated with various amounts of graphite and their oxidation behavior was investigated (in an isothermal condition); using a Thermo Gravimetric system (TG), in air and at temperatures ranging from 900"C to 1450"C. The preliminary results showed that the porosity and density of tempered samples were decreased when the graphite content was increased. However, after heating the samples at higher temperatures, the decreasing rate of porosity was lowered. At the beginning of the oxidation process, the rate of weight loss was high, but was gradually decreased when the... 

Fabrication of organohalide perovskite materials on the top of ZnO nanoparticles (NPs) has some beneficial advantages such as room temperature processing; however, the perovskite is not stable on ZnO NPs layer during the annealing process. In fact, there are only a few reports about the fabrication of perovskite solar cells on ZnO NPs layer. Herein, the decomposition mechanism of CH3NH3PbI3 perovskite materials on ZnO is reported, and it is found that the perovskite film on the top of the ZnO layer is converted into PbI2 during the annealing process due to the existence of hydroxide groups on the surface of the ZnO NPs. Depending on the annealing temperature, the reaction rate and the... 

In the present investigation, design of integrated numerical computing through Levenberg-Marquardt backpropagation neural network (LMBNN) is presented to examine the fluid mechanics problems governing the dynamics of expanding and contracting cylinder for Cross magneto-nanofluid flow (ECCCMNF) model in the presence of time dependent non-uniform magnetic force and permeability of the cylinder. The original system model ECCCMNF in terms of PDEs is converted to nonlinear ODEs by introducing the similarity transformations. Reference dataset of the designed LMBNN methodology is formulated with Adam numerical technique for scenarios of ECCCMNF by variation of thermophoresis temperature ratio... 

In this paper, an industrial ethylbenzene production unit has been simulated and the results are compared against five-day experimental data. According to prevailing unit condition, i.e. recycled ratio of benzene, benzene selectivity, and energy consumption, the unit is not working under its optimum conditions for minimum cost of ethylbenzene production. In the current design, high amount of benzene recycle (6:1) causes to have an additional cost due to fractionation of ethylbenzene from benzene. A new approach is proposed to modify the benzene alkylation process and reduce the unit's energy consumption. In the newly designed scheme, two double-bed alkylation reactors converted into four... 

Nanoparticle copper/carbon composite films were prepared by co-deposition of RF-Sputtering and RF-PECVD method from acetylene gas and copper target. We investigate deposition process in the region where by changing pressure, the process converts to physical sputtering mode in constant power regime and at a critical pressure between 1.5 to 3 Pa. The estimated value of mean ion energy at this critical point of pressure is close to threshold energy of physical sputtering of copper atoms by acetylene ions. By utilizing this property and by setting initial pressure from 1.3 to 6.6 Pa, nanoparticles copper/carbon composite films were grown with different copper content. The Copper content of our... 

[No abstract available]  

A wide range of loading conditions involving external forces with varying magnitudes, orientations and locations are encountered in daily activities. Here we computed the effect on trunk biomechanics of changes in force location (two levels) and orientation (5 values) in 4 subjects in upright standing while maintaining identical external moment of 15. Nm, 30. N. m or 45. Nm at the L5-S1. Driven by measured kinematics and gravity/external loads, the finite element models yielded substantially different trunk neuromuscular response with moderate alterations (up to 24% under 45 Nm moment) in spinal loads as the load orientation varied. Under identical moments, compression and shear forces at...