Sharif Digital Repository

In this study, a novel hybrid hydrogel based on chitosan, acrylic acid and amine-functionalized nanosilica was prepared and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. This hydrogel nanocomposite was used for removal of Co2+, Cu2+, Pb2+ and Zn2+ ions from aqueous solution. The metal ion adsorption was measured by inductively coupled plasma mass spectrometry. The adsorption behavior showed that the presence of modified nanosilica enhanced the porosity of the hydrogel network and affected its adsorption capacity in response to different parameters such as nanosilica content, metal ion concentration, adsorbent content,... 

Hybrid nanostructures combining semiconductor quantum dots and graphene are attracting increasing attention because of their optoelectronic properties promising for photovoltaic applications. We present a hot-injection synthesis of a colloidal nanostructure which we define as quasi core/shell PbS/graphene quantum dots due to the incomplete passivation of PbS surfaces with an ultrathin layer of graphene. Simulation by density functional theory of a prototypical model of a nonstoichiometric Pb-rich core (400 atoms) coated by graphene (20 atoms for each graphene sheet) indicates the possibility of surface passivation of (111) planes of PbS with graphene resulting in a decrease in trap states... 

Considering hydrogen as a future fuel, development of clean energy sources based on solar power is the main human challenge in recent years. Here, for the first time, Au:WO3 photoanodes are synthesized with different Au concentrations and then applied for photoelectrochemical (PEC) water splitting. A comprehensive statistical study on the prepared photoanode surface is conducted to understand the correlation between surface morphology and PEC activity, using atomic force microscopy (AFM). The results clearly justified the maximum surface area observed for the film containing 1 mol % Au. Additionally, X-ray diffraction (XRD) analysis determined that Au nanocrystals have been formed in cubic... 

Alumina-MWCNT composite was densified by microwave sintering. CNTs were coated with boehmite nanoparticles to enhance their distribution in composite samples. Calcination temperature of composite powder was determined by TGA analysis (5 °C/min). Samples containing 0 and 1vol%CNT were produced by cold isostatic pressing at 180 MPa. Microwave sintering (1520 °C for 45 min) was conducted under the flow of argon. Phase analysis of the calcined composite powder showed complete transformation of boehmite into gamma-alumina. The relative densities were 99.3% and 98.1% for monolithic alumina and composite, respectively. CNT addition improved the fracture toughness of alumina by ~37%. SEM images... 

This article investigates the influence of porosity on free and forced vibration characteristics of a nanoshell reinforced by graphene platelets (GPL). The material properties of piece-wise graphene-reinforced composites (GPLRCs) are assumed to be graded in the thickness direction of a cylindrical nanoshell and estimated using a nanomechanical model. In addition, because of imperfection of the current structure, three kinds of porosity distributions are considered. The nanostructure is modeled using modified strain gradient theory (MSGT) which is a size-dependent theory with three length scale parameters. The novelty of the current study is to consider the effects of porosity, GPLRC and MSGT... 

Resolvers as position sensors need a high frequency AC excitation voltage, and the induced voltage in their 2-phase perpendicular windings are amplitude modulated (AM) signals. For calculating the position, it is required to demodulated the output signals and calculate their envelopes. Then, inverse tangent can be used for calculating the position. Despite the advantages of resolvers, there are some drawbacks in their application. Calculating the envelopes is always one of the deep concerns in using resolvers. Furthermore, due to low-amplitude of the excitation flux, the performance of the resolvers is strongly affected by electromagnetic interference by the stray fields of motor and brake.... 

Sparse representation can be extended to high dimensions and can be used in many applications, including three-dimensional (3D) Inverse synthetic aperture radar (ISAR) imaging. In this study, the high-dimensional sparse representation problem and a recovery method called high-dimensional smoothed least zero-norm (HDSL0) are formulated. In this method, the theory and computation of tensors and approximating L0 norm using Gaussian functions are used for sparse recovery of high-dimensional data. To enhance the performance of HDSL0, modified regularised high-dimensional SL0 (MRe-HDSL0) algorithm, which benefits from the regularised form of SL0 and an additional hard thresholding step, is... 

Introduction: Porous 3D scaffolds synthesized using biocompatible and biodegradable materials could provide suitable microenvironment and mechanical support for optimal cell growth and function. The effect of the scaffold porosity on the mechanical properties, as well as the TiO2 nanoparticles addition on the bioactivity, antimicrobial, photocatalytic, and cytotoxicity properties of scaffolds were investigated. Methods: In the present study, porous scaffolds consisting poly (lactide-co-glycolide) (PLGA) containing TiO2 nanoparticles were fabricated via air-liquid foaming technique, which is a novel method and has more advantages due to not using additives for nucleation compared to former... 

In this research, the properties of Dolomite Graphite refractories with different additives were evaluated. The samples were prepared with various amounts of Graphite and resin content. After preparation of the samples, the physical, mechanical properties, slag corrosion and thermal shock resistance were evaluated. The properties of the samples were evaluated up to 11% total Carbon (10% Graphite and 1% residual Carbon from resin) in the system. The reduction in MOR of the specimens, before and after heat treatment was measured, as a measure for the thermal shock resistance evaluation. The slag corrosion test was conducted based on the crucible test, at 1600°C for 5 hr. Then, the depth of... 

The fabrication of TixNi1-x shape memory films using simultaneous magnetron sputtering from two separate, elemental targets was investigated. The films were deposited at room temperature and then annealed at 500 °C to achieve the shape memory effect. The influence of sputtering parameters such as power ratio to the targets (to control the composition) and Ar gas pressure (to control the film structure) were studied. It was found that the Ar gas pressure had a critical influence on the shape memory effect of the films. Characterization of the films was carried out by energy dispersive X-ray spectroscopy in a scanning electron microscope (to measure the film composition and uniformity), in... 

Alkalis, surfactants and/or polymers are usually injected in the injector wells so that the injection fluids can sweep through the reservoir and mobilize/recover more oil. However, the formation of stable emulsion due to the residual chemicals in the recovered crude oil poses problems in the primary separation process. This study focuses on the effect of Alkali-Surfactant-Polymer injection on creaming and coalescence of crude oil and water emulsion produced in the primary gravity separator. In addition, a model is developed in this work to predict the separation effectiveness of oil and water emulsion containing ASP. In this work, the effect of ASP on the stability and the separation of... 

Alkalis, surfactants and/or polymers are usually injected in the injector wells so that the injection fluids can sweep through the reservoir and mobilize/recover more oil. However, the formation of stable emulsion due to the residual chemicals in the recovered crude oil poses problems in the primary separation process. This study focuses on the effect of Alkali-Surfactant-Polymer injection on creaming and coalescence of crude oil and water emulsion produced in the primary gravity separator. In addition, a model is developed in this work to predict the separation effectiveness of oil and water emulsion containing ASP. In this work, the effect of ASP on the stability and the separation of... 

The most challenging requirement for depositing NiTi-based shape memory thin films is the control of film composition because a small deviation can strongly shift the transformation temperatures. This article presents a technique to control film composition via adjustment of the power supplied to the targets during simultaneous sputter deposition from separate Ni, Ti, and X (e.g., Hf) targets. After optimization of sputter parameters such as working gas pressure, target-substrate distance, and target power ratio, binary Ni100-x Tix thin films were fabricated and characterized by energy dispersive x-ray spectroscopy in a scanning electron microscope (to measure the film composition and... 

Multi-walled carbon nanotubes (MWCNTs) with diameter of about 50 nm were synthesized using thermal chemical vapor deposition. We have investigated the influence of Mg doping to the MWCNTs on its hydrogen storage property. TEM micrographs showed that Mg was attached to the MWCNTs and discontinuous arrangement of the carbon walls was recognized in the MWCNTs. According to XPS and BET analyses, the surface functional groups and pore size of the Mg-MWCNTs are increased by interactions between the Mg and the MWCNT's outer walls. The electrochemical discharging curves of the MWCNTs and Mg-doped MWCNTs revealed that the hydrogen storage capacity was 363 and 450 mAhg -1, respectively. Volumetric... 

Using multi-walled carbon nanotubes (MWCNTs), the present study focuses on their electrochemical hydrogen storage capacities. The results showed that the hydrogen desorption process is composed of two steps with voltages around -0.75 and -0.15 V. Hydrogen adsorption at -0.15 V took place at temperatures above 30 °C, and the amount of energy required for adsorbing hydrogen was 1.68 eV. The hydrogen storage capacity increased with increasing electrolyte temperature from 30 to 60 °C in both steps. The hydrogen storage capacity of the MWCNTs treated at different atmospheres showed that the decrease in the graphitization of MWCNTs led to the increase in hydrogen adsorption. The results also... 

The effects of HCl, HNO3, H2SO4 and HF acids on the purification and the electrochemical hydrogen storage of multi-walled carbon nanotubes (MWCNTs) were studied. The MWCNTs were synthesized on Fe-Ni catalyst by thermal chemical vapor deposition method. The X-ray diffraction and thermal gravimetric analysis results indicated that the MWCNTs purified by HF acid had the highest impurities as compared with the other acids. The N2 adsorption results at 77 K indicated that all the samples were mainly mesoporous and the purified MWCNTs by HF acid had the highest surface area as compared with the other acids. The hydrogen storage capacities of the purified MWCNTs by the following acids were in... 

Using a proper distribution function for speech signal or for its representations is of crucial importance in statistical-based speech processing algorithms. Although the most commonly used probability density function (pdf) for speech signals is Gaussian, recent studies have shown the superiority of super-Gaussian pdfs. A large research effort has focused on the investigation of a univariate case of speech signal distribution; however, in this paper, we study the multivariate distributions of speech signal and its representations using the conventional distribution functions, e.g., multivariate Gaussian and multivariate Laplace, and the copula-based multivariate distributions as candidates.... 

In this study, we have investigated the potential of a native bacterial strain isolated from an Iranian oil field for the production of biosurfactant. The bacterium was identified to be Bacillus mycoides by biochemical tests and 16S ribotyping. The biosurfactant, which was produced by this bacterium, was able to reduce the surface tension of media to 34. mN/m. Compositional analysis of the produced biosurfactant has been carried out by thin layer chromatography (TLC) and FT-IR. The biosurfactant produced by the isolate was characterized as lipopeptide derivative. Biosurfactant production was optimized by the combination of central composite design (CCD) and response surface methodology... 

Imaging is a key step in seismic data processing. To date, a myriad of advanced pre-stack depth migration approaches have been developed; however, reverse time migration (RTM) is still considered as the high-end imaging algorithm. The main limitations associated with the performance cost of reverse time migration are the intensive computation of the forward and backward simulations, time consumption, and memory allocation related to imaging condition. Based on the reduced order modeling, we proposed an algorithm, which can be adapted to all the aforementioned factors. Our proposed method benefit from Krylov subspaces method to compute certain mode shapes of the velocity model computed by as... 

As a means to relieve traffic congestion, toll pricing has recently received significant attention by transportation planners. Inappropriate use of transportation networks is one of the major causes of network congestion. Toll pricing is a method of traffic management in which traffic flow is guided to proper time and path in order to reduce the total delay in the network. This article investigates a method for solving the minimum toll revenue problem in real and large-scale transportation networks. The objective of this problem is to find link tolls that simultaneously cause users to efficiently use the transportation network and to minimize the total toll revenues to be collected. Although...