Sharif Digital Repository

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the... 

Phenols and alcohols are silylated with hexamethyldisilazane (HMDS) under microwave irradiation in solvent-free condition in good to excellent yields  

Modified couple stress theory is a size-dependent theorem capturing the micro/nanoscale effects influencing the mechanical behaviors of the micro- and nanostructures. In this paper, it is applied to investigate the nonlinear vibration of carbon nanotubes under step DC voltage. The vibration, natural frequencies and dynamic pull-in characteristics of the carbon nanotubes are studied in detail. Moreover, the effects of various boundary conditions and geometries are scrutinized on the dynamic characteristics. The results reveal that application of this theory leads to the higher values of the natural frequencies and dynamic pull-in voltages  

We study a classical problem in communication and wireless networks called Finding White Space Regions. In this problem, we are given a set of antennas (points) some of which are noisy (black) and the rest are working fine (white). The goal is to find a set of convex hulls with maximum total area that cover all white points and exclude all black points. In other words, these convex hulls make it safe for white antennas to communicate with each other without any interference with black antennas. We study the problem on three different settings (based on overlapping between different convex hulls) and find hardness results and good approximation algorithms  

Hybrid nanofluids have several advantages compared with the conventional types due to their modified properties. Their enhanced thermophysical and rheological properties make them more appropriate for solar energy systems. In this review paper, an overview of solar energy systems is represented, and afterwards, applications of hybrid nanofluids in various solar technologies, especially solar thermal, are reviewed. Comparison between the nanofluidic systems, and the conventional ones is performed in order to gain a deeper insight into the advantages of using nanofluids. According to the results of the reviewed studies, the most important reason for performance enhancement of nanofluidic solar... 

Urmia Lake River Basin (ULRB) is one of the most important habitats in the world and one of the major agricultural regions in Iran. On average, the ratio of irrigation to evapotranspiration in this basin is more than 73%. Investigating the irrigation water requirement pattern changes and the spatial distribution of evapotranspiration during the basin development period on a regional scale play important roles in understanding the basin situation. In this study, the actual evapotranspiration has been estimated by SEBAL model. By estimating the precipitation distribution in the basin, the agricultural irrigation water requirement pattern has been calculated using the land use map in 1995, 2010... 

A method is developed for in situ generation of 1,3-dioxan-5-one derivatives 2. These compounds are simple precursors for accessing carbohydrate structures and previously had to be produced via stepwise procedures using excessive amounts of reagents. In the present work, three different derivatives of 2 were synthesized via the reaction of trialkoxyalkanes with dihydroxyacetone dimer 1 in the presence of acetic acid as the catalyst. In the same pot, derivatives of 2 were reacted with aromatic aldehydes and 30 mol% of pyrrolidine to obtain high yields of the respective bischalcones 3 within short time periods. © 2019 M. Javad Poursharifi et al., published by De Gruyter 2019  

Multiple-input multiple-output (MIMO) radars have attracted much attention for their superior ability to enhance a system's performance. In this study, the authors' goal was the study of the spatial multiplexing gain of MIMO radars with widely separated antennas (WS-MIMO), which the authors showed that is equal to the number of unambiguously detectable targets. They obtained this number from two different aspects: first, by defining the ambiguity function of a WS-MIMO radar in the case of multiple targets, suitable for such purpose; Second, by modelling the MIMO radar system with a MIMO wireless channel. They showed that a MIMO radar is indeed a MIMO wireless system communicating the... 

Two gains play key roles in recently developed multiple-input-multiple-output (MIMO) wireless communication systems: 'spatial diversity' gain and 'spatial multiplexing' gain. The diversity gain (DG) refers to the capability to decrease the error rate of the MIMO channel, whereas the multiplexing gain (MG) implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the DG) and increasing data rate (via an increase in the MG). On the other hand, recently, MIMO radars have attracted much attention for their superior... 

Structures of tapered geometry are customarily used in a variety of applications. The analysis of such structures is usually made through finite element method using traditional beam, shell or brick elements. In this paper, a new tapered superelement is presented that lends itself to modeling revolving geometries under lateral, axial and torsional loads. The presented tapered superelement has 16 nodes. The performance of this element under static and dynamic loading and in rotating condition is examined. It is shown that this element yields accurate results with higher computational efficiency compared to conventional elements. Furthermore, it is verified that a single tapered superelement... 

This research has modelled a queuing system with no standard states. In order to analyse these systems, some parameters such as the mean of waiting time and the length of queue are computed. These situations usually occur when there is delay in the service, for example, in the gas queuing system that cars are unable to leave after receiving the required services due to the presence of other cars in front of them. These kinds of non-standard queuing systems are usually applied to the assembly and production lines. In this paper, a queuing model for the special non-standard state queuing system is developed to be used in gas stations. The proposed model is implemented in fuel stations in Iran... 

A molybdenum complex, [MoO2Cl2(DMSO)2], was immobilized on amino propyl and Schiff base modified magnetic Fe3O4@SiO2 nanoparticles by covalent linkage. The resulting nanoparticles were used as efficient and recyclable catalysts for the selective oxidation of sulfides to sulfoxides using urea hydrogen peroxide as the oxidant. The complete characterization of catalysts was carried out by means of thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), X-ray photoelectron spectroscopy (XPS), elemental analysis, FT-IR and Raman microprobe... 

Hydrogen storage/evolution behavior of nafion/NaCl/graphene quantum dot (GQD) mixed matrix as selective hydrogen capacitor (power source) was evaluated in detail through an electrochemical process at two independent potential ranges. For this purpose, a three-electrode system included Pt disk as counter electrode, Ag/AgCl as reference electrode and GQD-based mixed matrix-modified Pt disk as working electrode. For hydrogen storage, the deposition potential and time were evaluated to −1.0 V (vs. Ag/AgCl) and 120 s, respectively under high basic solution generated using NaOH (1.0 M) solution, followed by evolution of hydrogen at +0.8 V (vs. Ag/AgCl) during formation of hydrogen bubbles. The... 

Genetic algorithm for optimization of beam forming in spiral array antenna is used. The goal is to achieve a -20 dB in null over the wide frequency band. Our simulation shows -20 dB over 75 MHz Null Band width, in VHF band. © 2006 IEEE  

This paper studies the placement of antennas in presence of mountains for widely separated multiple-input multiple-output (MIMO) radar. One of the challenges in this configuration is proper placement of the receive antennas in order to achieve good performance. We derived Neyman-Pearson decision rule for target detection. Via several scenarios we show that proper placement of receivers can provide better performance  

Purpose - This paper aims to present the design and implementation of VirSense, a novel six-DOF haptic interface system, with an emphasis on its gravity compensation and fixed-base motors. Design/methodology/approach - In this paper, the design and manufacture of the VirSense robot and its comparison with the existing haptic devices are presented. The kinematic analysis of the robot, design of the components, and manufacturing of the robot are explained as well. Findings - The proposed system is employed to generate a Virtual Sense (VirSense) with fixed-base motors and a spring compensation system for counterbalancing the torques generated by the weight of the links. The fixed bases of the...