Sharif Digital Repository

In this paper we proposed a novel inverter to convert a DC voltage to a desired AC voltage. This inverter is designed for variable inductive loads and low output power applications. We proposed a novel simple PWM method which enables the inverter to keep the output current at six times more than the rated output current, without reducing output voltage value. In addition, based on a simple use of resonance in the circuit, the new inverter can raise the output voltage to extremely high amplitude for a relatively short time. These characteristics make the proposed inverter is useful for some industrial applications such as electrical vehicle. The new configuration of the circuit consists of a... 

A new Ultra Wideband (UWB) pulse shape is proposed to mitigate coexistence issues of IEEE802.11.a WLAN and Impulse Radio UWB (IR-UWB) systems. The proposed method is applicable to the reduction of any given narrowband (NB) interference into UWB systems. This pulse shape is based on frequency up-converting of first derivative of Gaussian pulse which has an adjustable null in Power Spectral Density (PSD) depending on up-converting frequency. Both analytical and simulation results with an adaptive receiver show that an UWB system with interference from a WLAN has noticeable improved performance when using the proposed pulse in comparison with using conventional modulated Gaussian pulse  

The crystallization behavior of fluorphlogopite, a glass-ceramic in the MgO-SiO2-Al2O3-K2O-B 2O3-F system, was studied by substitution of Li 2O for K2O in the glass composition. DTA, XRD and SEM were used for the study of crystallization behavior, formed phases and microstructure of the resulting glass-ceramics. Crystallization kinetics of the glass was investigated under non-isothermal conditions, using the formal theory of transformations for heterogeneous nucleation. The crystallization results were analyzed, and both the activation energy of crystallization process as well as the crystallization mechanism were characterized. Calculated kinetic parameters indicated that the appropriate... 

Pursuing a sensing structure with a large effective surface area, partial ordered arrays of ZnO nanorods with flower-like structures are introduced for gas sensing applications. Room temperature H2S response of the grown structure shows significant enhancement after modification with Au nanoparticles. High response (about 1270 at 6 ppm H2S gas) and selectivity were achieved by depositing an Au layer with nominal thickness ∼6 nm. X-ray photoelectron spectroscopy (XPS) was utilized to describe the H2S sensing mechanism  

In the past few years, most studies have focused on smart substances that can respond to changes in the environment, as they can be appropriately applied in different fields, including biosensing, biotechnology, and drug delivery. Here, new fluorescent carbon dots (CDs) are synthesized by Terebinth by designing a simple and single-stage hydrothermal path, which facilitates the manufacture of CDs with no need for boring artificial methods, or using poisonous/costly solvents and starting substances. The method is used to concurrently form CDs and passivate their surface, which results in inherently emitted fluorescence. The study of the structure and optical features of the resulting CDs... 

Not only should dams be evaluated for seismic shaking, but their capability to survive potential fault displacement in their foundations should also be assessed. Safety reviews of existing dams suggest that geological-seismic evaluation of some dam sites has failed to recognize the existence of possibly active faults. In this study, the nonlinear seismic behavior of concrete gravity dams, due to relative fault dislocation occurring in foundations, has been investigated. Two types of fault movement, including normal-slip and reverse-slip, have been considered. These two types, combined with the location of fault lines, with respect to the toe, middle, and heel of the dam base, angle of fault,... 

In this research, we have used glancing angle deposition (GLAD) RF sputtering technique with various angular speeds ranging from 5 to 30 RPM to fabricate polytetrafluoroethylene (PTFE, Teflon) coated Tungsten on glass substrate for producing hydrophobic surface. According to scanning electron microscopy (SEM) observations, Tungsten nanorods were formed on the substrate with average diameter and length of about ∼50 nm and 300 nm, respectively. Hydrophobic property of W/Glass and PTFE/W/Glass systems was investigated by water contact angle measurements and we have found that the contact angle varied with the substrate angular speed. Maximum contact angle of 121 was measured for the... 

This paper attempts to study the demand function of natural gas in Iran using smooth transition regression model (STR). To this end, gross domestic productions (GDP), real price of natural gas and temperature have been employed as variables explaining the natural gas demand from 1971 to 2009. The results indicate that natural gas demand follows an LSTR1 nonlinear two-regime model if the real price of natural gas is considered as the transition variable. Estimation results also indicate that the slope parameter approximately equals the high value of 10 and the threshold value is 31.82. Rials. 111 USD=24,700 Rials (IRR) at April 2013. per one cubic meter consumption of natural gas. The results... 

A simple method for synthesising W17O47 nanowires on tungsten oxide thin films deposited by sol-gel method on mica substrate has been reported. After thermally annealing thin films at 700 C in H2 ambient for different durations and subsequently in N2 ambient for 60 min, single-crystalline W17O47 nanowires along h0 01i direction were formed on the surface. Experimental results revealed that annealing under H2 ambient has an important effect on the growth of W17O47 nanowires. According to scanning electron microscopic observations, the synthesised nanowires have ∼70 nm in width and a few microns in length after annealing under H2 ambient for 30min and subsequently under N2 ambient for 60min. A... 

Binding of Mg 2+, Ca 2+, Zn 2+, and Cu + metal ions with 2′-deoxythymidine (dT) nucleoside was studied using a density functional theory method and a 6-311++G(d,p) basis set. This work demonstrated that the interaction of dT with these cations is tri-coordinated · (O2, O4′, O5′). Among the four types of cations, Zn 2+ cation exhibited the most tendency to interact with the dT. Cations via their interaction with dT can affect the N-glycosidic bond length, the values of pseudorotation of the sugar ring, the orientation of the base unit with respect to the sugar ring, and the acidity of the O5′H, O3′H, and N3H groups in the dT nucleoside. Natural bond orbital analysis was performed to calculate... 

In this paper, a shape optimization technique is presented for hot isostatic pressing of metal powders based on the genetic algorithm approach. The GA technique is used to obtain the desired optimal compacted component by changing the boundaries of component and verifying the prescribed constraints. The coupled thermo-mechanical analysis of hot isostatic pressing is employed for metal powders during densification process. The numerical modeling of hot powder compaction simulation is performed based on the large deformation formulation, temperature-dependent cap plasticity model, and frictional contact algorithm. A modified cap plasticity model considering the temperature effects is used in... 

TiO2/ZnO and ZnO/TiO2 nanolayer thin films were synthesized using sol-gel method. Optical analysis revealed high transmittance of the films in the visible range with almost the same bandgap energy for the both systems. XPS technique shows stoichiometric formation of TiO2 and ZnO on the surface of TiO2/ZnO and ZnO/TiO2 layers, respectively. According to AFM observations and its data analysis, the TiO2/ZnO films exhibited a higher surface roughness and more effective interfaces with electrolyte during redox reactions. Based on photoelectrochemical measurements, TiO2/ZnO nanolayer photoanode possesses a lower charge transfer resistance and higher transient time for charge carriers (e- and h+)... 

We use the theory of selfdual Lagrangians to give a variational approach to the homogenization of equations in divergence form, that are driven by a periodic family of maximal monotone vector fields. The approach has the advantage of using Γ-convergence methods for corresponding functionals just as in the classical case of convex potentials, as opposed to the graph convergence methods used in the absence of potentials. A new variational formulation for the homogenized equation is also given  

In this study, the effects of TiO2 addition on the physical and photoelectrochemical properties of ZnO thin films have been investigated. The (TiO2)x-(ZnO)1-x nanocomposite thin films were dip-coated on both glass and indium tin oxide (ITO)-coated conducting glass substrates with various values of x, specifically 0, 0.05, 0.1, 0.25 and 0.5. Optical properties of the samples were studied by UV-vis spectrophotometry in the range of 300-1100 nm. The optical spectra of the nanocomposite thin films showed high transparency in the visible region. The optical bandgap energy of the (TiO2)x-(ZnO)1-x films increased slightly with increasing values of x. The crystalline structure of the nanocomposite... 

We construct a new proximity graph, called the Pie Delaunay graph, on a set of n points which is a super graph of Yao graph and Euclidean minimum spanning tree (EMST). We efficiently maintain the Pie Delaunay graph where the points are moving in the plane. We use the kinetic Pie Delaunay graph to create a kinetic data structure (KDS) for maintenance of the Yao graph and the EMST on a set of n moving points in 2-dimensional space. Assuming x and y coordinates of the points are defined by algebraic functions of at most degree s, the structure uses O(n) space, O(nlogn) preprocessing time, and processes O(n 2 λ 2s∈+∈2(n)β s + 2(n)) events for the Yao graph and O(n 2 λ 2s + 2(n)) events for the... 

Thin films of (WO3)1-x-(Fe2O 3)x composition were deposited by thermal evaporation on glass substrates and then all samples were annealed at 200-500 °C in air. Optical properties such as transmittance, reflectance, optical bangap energy, and the optical constants of the "as deposited" and the annealed films were studied using ultraviolet-visible spectrophotometry. It was shown that the annealing process changes the film optical properties which were related to Fe2O3 concentration. Moreover, using X-ray photoelectron spectroscopy, we have indicated that WO3 is stoichiometric, while iron oxide was in both FeO and Fe2O3 compositions so that the FeO composition converted to Fe2O3 after the... 

In this study, pure TiO2 and Au:TiO2 nanocomposite thin films are both synthesized using sol-gel and RF reactive co-sputtering methods. Physical and photoelectrochemical properties of the thin films deposited by each method are compared. The optical density spectra and scanning electron microscopy images of the Au:TiO2 films reveal formation of gold nanoparticles in the all nanocomposite films synthesized by two methods. Moreover, the optical bandgap energy of the thin films decreases with addition of Au nanoparticles. X-ray photoelectron spectroscopy indicates that the presence of gold in metallic state and the formation of TiO2 is stoichiometric. The photoelectrochemical properties of the... 

In this paper, the coupled thermo-mechanical simulation of hot isostatic pressing (HIPing) is presented for metal powders during densification process. The densification of powder is assumed to occur due to plastic hardening of metal particles. The constitutive model developed is used to describe the nonlinear behavior of metal powder. The numerical modeling of hot powder compaction simulation is performed based on the large deformation formulation, powder plasticity behavior, and frictional contact algorithm. A Lagrangian finite element formulation is employed for the large powder deformations. A modified cap plasticity model considering temperature effects is used in numerical simulation... 

This investigation focused on a comparison between hydroxyapatite (HA) and carbon-nanotube-reinforced hydroxyapatite composite (CNTs/HA) coatings. The HA and CNTs/HA composite (with 5wt% CNTs) coatings were prepared with the sol-gel method on 316L stainless steel. Phase evaluation by means of XRD and Raman spectroscopy was performed on the HA and CNTs/HA composite coatings. The coatings were immersed in simulated body fluid (SBF) in order to evaluate the biological properties of the coatings. During the first week of immersion, the increase in the amount of Ca2+ precipitation in the SBF when CNTs/HA was used was lower than for the HA coatings. This behavior can be related to the difference... 

A simple method for synthesis of W17O47 nanothick plates by annealing sol-gel-deposited tungsten oxide thin films on soda lime substrate has been reported. After heat treatment of the dried thin films at 700 °C in N2 ambient for 60 min, W17O47 nanothick plates with [100] orientation were obtained. The synthesized product was characterized and analyzed by, X-ray diffraction (XRD), SEM, XPS and ultraviolet-visible spectrophotometery. According to SEM observations, nanothick plates grew with random orientations on the surface. In addition, it was observed that some of the nanothick plates were constituted from several nanosheets. XRD analysis determined that the nanothick plates were mainly...