Sharif Digital Repository

Polyethylene (PE) is used as an insulation material for wires and cables because of its excellent electrical properties. For such application, it can be exposed to the high energy irradiation such as gamma ray and electron beam (EB), making possible crosslinking of the PE. Most of the properties of PE are improved greatly after irradiation, but it was harden and split easily. Due to the flexibility of EVA, depending on the vinyl acetate content, it can improve the toughness of the LDPE significantly upon addition to this polymer. As a result, radiation induced LDPE/EVA blend has been a good candidate for the wire and cable insulation. Also, upon addition of a few amount of OC, different... 

Recently nanodiamond has drawn a vast attention of researchers due to exceptional mechanical properties. However, nanodiamond tendency to aggregation in polymer matrix restricts its reinforcement properties. In this research, novolac phenolic resin nanocomposites reinforced by nanodiamond were prepared by solution blending method and their mechanical properties were investigated. In order to prevent nanodiamond aggregation, ultrasonic treatment was used and nanodiamond surface was modified with acid and amine functional groups. FTIR and TGA were performed in order to investigate nanodiamond surface and confirmation of existence of acid carboxylic and oleylamine (OLA) groups. Produced... 

The highest and most difficult layer of Natural Language Processing, is the understanding of meaning. As a result, lexicons and annotated corpora are of the utmost importance in this area. However, the lack of such semantic resources, especially in Abstract Meaning Representation (AMR), is one of the main issues in this field for Persian Language. This work by modeling PropBank, a semantic valency lexicon for English predicates, is the first step towards building such lexicons for Persian Language with the focus on AMR. Thus, a guideline describing how to annotate the Persian predicates is provided which first evaluates the common structures between the two languages and then focuses on the... 

Over the past decade, MOFs have been extensively studied due to their very high specific surface area and porous structure. Among a wide range of MOFs, UiO-66 has produced widespread attention for its excellent solvent resistance and high thermal stability. This nanoparticle is formed by 12 coordinates between Zr6O4(OH)4 unit and terephthalic acid ligand, and it seems that the similarity of its organic ligand with one of the PET-forming monomers makes them highly compatible. In this study, for the first time, the role of UiO-66 nanoparticles in improving the amount and rate of crystallization and mechanical and rheological properties of PET was investigated using the melt mixing method. For... 

Test driven software development is one of the most important practices in agile software production. In this practice, the programmer must write appropriate test cases before implementing the desired program. That is, at first, he should know what the function of his desired program is, and then considering them, the test cases are implemented. The problem with this method is that the programmer may not have much experience in this work, and good test cases may not be produced, and at the same time, this work is very time-consuming. As a result, this method may be abandoned.In this thesis, an attempt is made to provide a systematic method to make the production of test cases for the program... 

In this study, the influence of multi wall carbon nanotube on the thermal properties and microstructure of open cell flexible polyurethane (PU) foam was investigated. To do this untreated CNT (named here n-CNT) along with three different highly functionalized CNTs having carboxyl, hydroxyl and amide functional groups, abbreviated here by CNT-COOH, CNT-OH and CNT-NH-COR, respectively, were employed. A series of PU foam with and without CNTs (both treated and untreated ones) were prepared by cast molding. Prior molding, the CNTs (0.1 wt% loading) were first dispersed into the polyol (Mw = 3000 g/mol and OH No. 56) and then the mixture was subsequently added to the isocynate (TDI). The SEM... 

Multiwall carbon nanotubes (MWCNTs) and carbon black (CB) reinforced polypropylene/polyamide6 (75/25) nanocomposites were prepared by melt compounding approach. Polypropylene grafted with maleic anhydride (PP-g-MA) was used as compatibilizer. Different amount of fillers were introduced into the polymer blends. The morphology, mechanical, rheological properties and crystallization behavior of the composites were investigated. Scanning electron microscopy was employed to study the microstructure. Differential scanning calorimetry (DSC) results showed that the addition of MWNT or CB to PP/PA6 blend resultes increase in crystallinity degree of PA6. The fillers were found to be located... 

Vacuum assisted resin transfer molding (VARTM) is one of the most efficient and low cost process in composite industries. In this process, the preform is covered by a flexible vacuum bag and resin flows into the mold with applying vacuum pressure at the vent. The main objective in VARTM process is preventing voids and dry spots formation in final composite part because these defects may significantly deteriorate the mechanical properties of a structure. Flow front is an important parameter in this process which have a high influence on the void formation. Resin flow control is required to prevent dry spots or micro voids during the VARTM process. In general, the flow control is classified... 

There are so many problems in using of petroleum-based polymers such as their stability in the environment. According to the research carried out on this problem, one of the best ways to overcome this hardship is using of bio-based polymers. The most important bio-based polymer is polylactic acid. The very polymer enjoys the best mechanical properties but it is so expensive that make it impossible to afford. Therefore, in this project, a nano-composite structure of polylactic acid with thermoplastic starch reinforced with nano-particles was produced. After manufacturing, the process of mixture and the best percent for the very mixture for its use in packaging industry were investigated  

The aim of this work was to synthesize hollow polyaniline nanostructures to be used as pH responsive nanoreservoirs for corrosion inhibitors in self-healing cotings. First, homogeneous and fairly monosized microspherers of polyaniline with nanosized shell was synthesized using a simple soft template method with β-naphthalene sulfonic acid (β-NSA) as both the surfactant and dopant, and ammonium persulfate (APS) as the oxidant at 2-5◦C. The morphology of PANI-NSA was successfully controlled from nanotubes to microsphere, by changing the synthesis conditions (i.e. pH, the concentration of surfactant and monomer, temperature, etc). Then, the nanostructured hollow PANI microspheres were applied... 

Aging of rubber compounds at high temperature and pressure acidic gas is a challenge for using them for a long time. Therefore, in this thesis aging of NBR/PVC compounds against H¬2S and CO2 has been investigated. The main method have been used is Full Factorial Design of Experiment. The parameters have been examined are content of zinc oxide, plasticizer RPO ASTM 290 and antioxidant 4010 NA. The content have been set in tow levels and effect of each have investigated in ambient and 120 degree of centigrad temperature. The results show that the effect of antioxidant 4010 NA on aging of compounds is negative and zinc oxide and plasticizer RPO ASTM 290 are positive  

The amino groups present in the chemical structure of chitosan have made this material a prominent dye absorbents. But researchers have always taken steps to improve conditions and increase absorption. One of the materials that has attracted most researchers today is metal-organic frameworks. These porous materials with high surface area, optimum thermal resistance and adsorbent dye functional groups have been used as the reinfocing in the chitosan polymer field to adsorb anionic dye (methyl orange) from the aqueous media. One of metal-organic frameworks is UiO-66, which was selected as a reinforcing phase in the polymer field, due to its good stability in aqueous solutions, good thermal... 

Hybrid nanoparticle comprising of nanosilica (NS) and nanodiamond (ND), as denoted by ND@NS, was synthesized by a two-step chemistry route and then incorporated into styrene-butadiene rubber (SBR) at low concentrations up to 5 phr by a two-roll mill. Physical hybrids of NS and ND, i.e., ND&NS, with a weight ratio similar to chemical hybrid (80:20 for NS:ND), were also incorporated into SBR. Field emission scanning electron microscopy observations revealed very fine dispersion of nanoparticles in the case of physical hybrids (ND&NS); whereas, agglomerations and aggregation of nanoparticles were evidenced for ND@NS. Tensile and dynamic mechanical analyses exhibited a higher reinforcing effect... 

Bio-based shape memory polymers with fast-response have high potential for use in medical applications. In this study, biocompatible and biodegradable nanocomposites based on shape memory polyurethane acrylates (SMPUA)/cellulose nanocrystals (CNC), were synthesized by in-situ polymerization. CNC is a natural and renewable nanoparticle that has been considered for medical applications due to its excellent mechanical and biological properties and surface chemistry. At the first phase of this study, in order to synthesize UV-curable shape memory polyurethane acrylate, polycaprolactone diol (PCL-Diol), hexamethylene diisocyanate (HDI) and hydroxyethyl methacrylate (HEMA) were used as an reactive...