Sharif Digital Repository

Pore facies analysis plays an important role in the classification of reservoir rocks and reservoir simulation studies. The current study proposes a two-step approach for pore facies characterization in the carbonate reservoirs with an example from the Kangan and Dalan formations in the South Pars gas field. In the first step, pore facieswere determined based on Mercury Injection Capillary Pressure (MICP) data in corporation with the Hierarchical Clustering Analysis (HCA) method. Each pore facies represents a specific type of pore geometry indicating the interaction between the primary rock fabric and its diagenetic overprints. In the next step, polynomial meta-models were established based... 

Large-scale simulation of spiking neural networks on hardware with a remarkable resemblance to their mathematical models is a key objective of the neuromorphic discipline. This issue is, however, considerably resource-intensive due to the presence of nonlinear terms in neuron models. This paper proposes a novel uniform piecewise linear segmentation approach for nonlinear function evaluations. Employing the proposed approach, we present a uniform-segmented adaptive exponential neuron model capable of accurately producing various responses exhibited by the original model and suitable for efficient large-scale implementation. In contrast to previous nonuniform-segmented neuron models, the... 

Computational investigations on the gas phase SN2 reactions of X ions (X-=OH-,F-,Cl-,Br-, and I-) with fluoroethane and 2-fluoroethanol (β-hydroxyl ethyl fluoride) were performed by using MPW1K, M06 and CCSD(T) methods with a range of basis sets including 66-311++G**, TZVP, aug-cc-pVDZ and SDD. To better understand the nature of the corresponding intermolecular interactions, we performed natural bond orbital (NBO) analysis and Bader's quantum theory of atoms in molecules (QTAIM). In our calculations, we took into account two possible pathways for these reactions, i.e. SN2 reactions of 2-fluoroethanol. In path(i), β-hydroxyl group participates in hydrogen bonding... 

In this paper, the V-shape development model approach for designing an automotive floor panel made by laminated structure is investigated to attain the best trade-off between the system and subsystem level requirements while improving the local and global performance of the vehicle. For this purpose, the bending and torsional stiffness of the body structure, as well as mass, strength, and vibration attenuation of the floor panel, are considered as design objectives at the system and subsystem levels. A multi-objective discrete optimization of a laminated configuration is performed using the Taguchi-based grey relational analysis. Material grades and thicknesses of the sandwich panel face... 

Low structure carbon black (CBN330), conductive high structure carbon black (CBXE2B) and carboxylated multiwalled carbon nanotube (MWCNT) were loaded into the blend of natural rubber (NR) and styrene butadiene rubber (SBR) at different contents up to 10 phr. Kraus plots showed that all the reinforcements interact with NR/SBR blend appropriately. However, the CBXE2B whose interfacial area is the highest showed greatest value of Kraus interaction parameter. Flory-Rhener model and effective torque value revealed that all of the reinforcements enhanced the crosslink density, among them CBXE2B showed the highest impact and MWCNT placed in the second rank. It was also shown that the cure kinetic... 

A novel substrateless power amplifier module realized by ridge gap waveguide (RGW) technology is proposed in Ka-band. Up to our knowledge, this is the first time that an active device is directly integrated with an RGW structure. No substrate is used in the RF section of the implemented power amplifier and the whole structure is made by machining a piece of metal. The amplifier was made of two pieces and was easily assembled without needing a precise contact between the two sections. The cavity resonance of the amplifier is suppressed using a pining structure. The fabricated amplifier module is self-packaged and does not need any packaging. It is shown that the simulated and measured results... 

The reinforcing effect of high structure carbon black (HSCB) and multi-walled carbon nanotubes (MWCNTs) on natural rubber/styrene-butadiene rubber blend processed using mechanical mixing was comparatively investigated. In-depth analysis by dynamic mechanical analysis, the Eggers-Schummer model and Medalia's relationship showed that HSCB aggregates provided large internal pores leading to significant immobilized macromolecules in filled rubber. Additionally, a tubular immobilized rubber layer with a thickness of 8nm was estimated for the rubber/MWCNT system based on dynamic mechanical analysis data. The mechanical performance of the HSCB filled blend was higher than that of the MWCNT filled... 

Novel types of narrow band filters based on the newly introduced gap waveguide technology are presented in this paper. The proposed filters have a central frequency of 35 GHz with approximately 1% fractional bandwidth. The filter resonators are composed of two separate plates and are manufactured by milling metallic blocks. The gap between the two metallic plates eliminates the need for electrical contact between them. This feature allows the resonators to be stacked in different layers. The filtering function is realized by producing a coupling between the stacked resonators. The measurement results of the manufactured filters are in good agreement with full-wave simulations, even without... 

A half power divider using ridge gap waveguide technology is realized in millimeter wave frequencies. By machining a piece of metal the divider was fabricated. There is no need to an electrical connection between the divider constitutive parts. The fabricated divider is self-packaged. Cylindrical pins are used in the divider structure for ease of fabrication. Low loss power division and good isolation between ports is measured. Also the measured impedance matching of the divider ports is acceptable. Good agreement between the simulation and measurement is achieved. © 2016 IEEE  

To improve the biocompatibility and corrosion resistance of 316L SS (Stainless Steel) metal implants, HAp(hydroxyapatite)/TiO2/Al2O3 nanocomposite coating was created using dip sol-gel method sintered at 550 °C. The weight percentage of TiO2+ Al2O3 in these coatings was 20, 30, and 40% wt. In this study, characterization was performed using FTIR (Fourier-Transform Infrared Spectroscopy), XRD, FE-SEM (Field Emission Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), DLS (Dynamic Light Scattering), Pull-off, and AFM (Atomic Force Microscopy) analysis. The potentiodynamic polarization and EIS (Electrochemical Impedance Spectroscopy) were performed in the simulated body fluid... 

Varactor frequency multipliers often show parametric instability with increasing RF input power. Examination of the added phase noise of the varactor frequency multipliers show that, if parametric oscillations are present in the circuit, output phase noise degrades remarkably in some specific driving levels. Phase noise analysis is done by the conversion matrix method. The conversion method predicts the phase noise degradation precisely because it encounters the noise conversion by large driving levels. The added phase noise of a varactor frequency doubler with subharmonic oscillation is calculated and the simulation results are compared with measurement results. Both simulation and... 

To improve the biocompatibility and corrosion resistance of 316L SS (Stainless Steel) metal implants, HAp(hydroxyapatite)/TiO2/Al2O3 nanocomposite coating was created using dip sol-gel method sintered at 550 °C. The weight percentage of TiO2+ Al2O3 in these coatings was 20, 30, and 40% wt. In this study, characterization was performed using FTIR (Fourier-Transform Infrared Spectroscopy), XRD, FE-SEM (Field Emission Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), DLS (Dynamic Light Scattering), Pull-off, and AFM (Atomic Force Microscopy) analysis. The potentiodynamic polarization and EIS (Electrochemical Impedance Spectroscopy) were performed in the simulated body fluid... 

To improve the biocompatibility and corrosion resistance of 316L SS (Stainless Steel) metal implants, HAp(hydroxyapatite)/TiO2/Al2O3 nanocomposite coating was created using dip sol-gel method sintered at 550 °C. The weight percentage of TiO2+ Al2O3 in these coatings was 20, 30, and 40% wt. In this study, characterization was performed using FTIR (Fourier-Transform Infrared Spectroscopy), XRD, FE-SEM (Field Emission Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), DLS (Dynamic Light Scattering), Pull-off, and AFM (Atomic Force Microscopy) analysis. The potentiodynamic polarization and EIS (Electrochemical Impedance Spectroscopy) were performed in the simulated body fluid... 

Leak detection based on acoustic emission needs robust time delay estimation in the presence of various types of noise. Considering several aspects of leakage signal and noise, the present work introduces wavelet based optimized residual complexity (WORC), in order to minimize the probability of false alarms in the presence of correlated, uncorrelated, and impulsive noise. The proposed method utilizes two approaches simultaneously. First, it optimizes residual complexity “for robustness against both correlated and uncorrelated noise”, then it employs wavelet basis in order to reduce the complexity of mixture of correlated and impulsive noise. In order to compare the resolution and percentage... 

In this study a 2D cubic chamber model filled with paraffin is analyzed with and without the inclusion of magnetic Fe3O4 nanoparticles at concentrations of 0.5, 1, 1.5 and 2 wt%, and an external magnetic field of intensities 0.005, 0.01, 0.015 and 0.02 T. It is ascertained that adding magnetic nanoparticles leads the horizontal temperature gradient to be reduced owing to increments in thermal conductivity. Additionally, this feature is found to be accelerated by applying an external magnetic field, which shapes highly conductive cluster formations of nanoparticles. However, since the increase in nanoparticle concentration and magnetic intensity increases the composite viscosity, there is an... 

Metal forming processes are widely used in industrial productions, automobile bodies, food industries, oil refineries, and liquid and gas transmission systems. Analyzing these processes is very important to reduce wastes and optimize the processes. Study of some main factors such as physical and mechanical properties of material and its formability, die geometry, die material, lubrication and pressing speed has been the topic of many research projects. In this paper, forming limit diagrams (FLDs) for LC and ULC steels and the effect of different parameters like the work-hardening exponent, n, and the plastic strain ratio, r, on these diagrams have been evaluated and simulated using... 

In the present paper, a comprehensive study on the prediction of forming limit diagrams (FLDs) for an AA3003-O aluminium alloy is developed theoretically and experimentally. For obtaining the experimental FLDs, an out-of-plane formability test was performed based on the technique proposed by Ozturk and Lee [F. Ozturk, D. Lee, J. Mater. Process. Technol. 170 (2005) 247-253]. The classical Marciniak-Kuczynski (M-K) model and some new yield criteria are utilized to simulate the necking phenomenon and calculate the limit strains theoretically. The employed yield functions are: the BBC2000, BBC2002, and BBC2003 yield criteria proposed by Banabic et al. [D. Banabic, S.D. Comsa, T. Balan, in:... 

Separation of the effects of initial horizontal stress and relative density on cone tip resistance in sandy soils has been a complicated issue for many years. In order to overcome this problem, a numerical modeling of CPT which has been verified by calibration chamber tests, has been used in this paper to achieve a reliable analytical solution. The analytical solution has resulted in two relationships for sleeve friction and cone tip resistance in terms of the initial conditions of sandy soil. Based on the presented solution, the initial horizontal stress and relative density can be determined according to CPT measurements. © 2017 Elsevier Ltd  

Despite the various approaches in the literature adopted for analysing cone penetration test (CPT), determination of the initial horizontal stress and relative density of a sandy soil during this test has not been tackled yet. In order to propose a new method in this regard, a numerical study of CPT has been performed and the predicted results have been compared with several databases of comprehensive calibration chamber tests. The penetration mechanism has been then fully investigated by presenting different kinds of outputs for the surrounding soil. Finally, an innovative procedure has been suggested for estimating the initial horizontal stress and relative density during performing CPT in... 

Despite the various approaches in the literature adopted for analysing cone penetration test (CPT), determination of the initial horizontal stress and relative density of a sandy soil during this test has not been tackled yet. In order to propose a new method in this regard, a numerical study of CPT has been performed and the predicted results have been compared with several databases of comprehensive calibration chamber tests. The penetration mechanism has been then fully investigated by presenting different kinds of outputs for the surrounding soil. Finally, an innovative procedure has been suggested for estimating the initial horizontal stress and relative density during performing CPT in...