Sharif Digital Repository

In recent years, the significant growth of the population has led to an increase in energy demand and subsequent rise in waste production. A substantial share of the energy demand and consumption in the industrial sector, particularly in steel production, requires the utilization of renewable technologies for energy and clean fuel production, such as hydrogen, to address this growing demand and mitigate environmental impact. This study focuses on a waste-to-energy technique as a viable solution to facilitate the transition towards green steel production in the industrial sector of Kerman province, primarily targeting the decarbonization of utility generation in steel production process.... 

Today, the rapid and increasing growth of various human societies has led to an increased consumption of energy and the need for new resources. In fact, the excessive consumption of energy, especially fossil fuels, has caused adverse and sometimes irreversible effects on the human environment. Also, the consumption of different types of fossil fuels such as coal, oil, and natural gas, leads to a significant increase in greenhouse gases in the atmosphere. On the other hand, population growth and technological advancements in the last century have led to an increase in the demand for energy carriers. Therefore, the use of new energy sources instead of fossil fuels is an inevitable matter.... 

Air pollution has been one of the most important problems in Tehran in recent years. So that the number of deaths due to air pollution in Tehran reaches more than 7000 cases per year. More than 75% of air pollutant emissions in Tehran city (including 60% of PM2.5 emissions) originate from mobile sources. Considering the harmful effects and damages caused by air pollutants, it is important to examine and evaluate the effects of hybrid-electric vehicles on the emissions of the transportation sector and air quality, especially in areas with a large population and realized high traffic load. On the other hand, the continuous reduction of renewable electricity production costs makes electricity a... 

The release of toxic materials causes tragic accidents every year. There are various techniques in order to mitigate the release effect of these materials such as Application of air jets, steam curtains and water curtains. This study presents numerical calculations to reproduce the continuous ammonia release dispersion with and without the mitigating influence of a downwind water curtain using computational fluid dynamic (CFD) software ANSYS Fluent 15.0. The RNG model coupled with Lagrangian discrete phase model (DPM) was used to simulate the dilution effectiveness of the water curtain system. The ammonia absorption was taken into account by means of user-defined functions (UDF). The... 

One of the actions taken to mitigate the climate change is research, development and demonstration (RD&D) investments in renewable energy technology. In addition to domestic R&D spending, the importation of foreign technologies, as a main channel of technology transfer, is another option to obtain renewable energy technologies in order to achieve climate objectives. In this study, a panel dataset of 28 OECD member countries from 2011 to 2020 is analysed, using the OLS, fixed-effects, and two-system system GMM methods, to assess the impacts of public spending on renewable energy RD&D and the import of renewable energy technologies on the energy-related CO2 emissions. To fully capture the the... 

This research uses systems dynamics modeling to present an integrated assessment of the energy-economic damage caused by climate change in Iran under different climate scenarios. Implementing these policies will cause a change in the use of global oil, followed by a change in the outlook for oil price changes in the future. Due to the high dependence of the country's economy on fossil fuels, oil price changes affect the country's economy. In the first step of this thesis, the system dynamics method examines the prospect of oil price change in climate scenarios. Then, according to the oil supply and production, in different scenarios, the assessment of the future conditions of the oil market... 

The purpose of this research is to monitor the health of structures using the updated finite element model, in which digital images are used to optimize the numerical model. Structural Health Monitoring (SHM) is always an important and significant issue that has attracted the attention of many researchers in recent years. In general, some researches have been conducted in this field using physical sensors that provide discrete data to the system for analysis. Using cameras to monitor the structure makes it possible to extract continuous and integrated data from the structure using digital images, which is a significant advantage compared to physical sensors.In this research, a steel... 

Aluminum Bronzes have many applications in marine environments. These alloys suffer from both hot cracking and cold cracking. In order to overcome the hot cracking and cold cracking, Semisolid Stir Joining method and a proper thermal cycle was used respectively. Effects of temperature, stirring rate, and tool type were investigated in Semisolid Stir joining method. In this method, butt joint design was used in order to place specimens, and the specimens were heated up to specific temperatures (920, 925, 930°C). A stirrer (Cylindrical and Grooved tool) with three rotational speeds (800, 1200, 1600 RPM) was introduced into the stir weld seam. Welded specimens were cooled to the 900°C... 

In order to increase the network performance, to discover network security threats, to guarantee the quality of services, to simulate networks and develop new network protocols, network designers and operators need software tools to analyze the network traffic. The first step to do this analysis is network monitoring. This can be done by using various software and hardware tools.
In this research we developed a tool which analyzes the network traffic using appropriate statistical methods. The models which are analyzed in this application are: Poisson, Self-similar and Weibull. This application analyzes the network traffic based on this statistical models and calculates their parameters.... 

The increasing number of road accidents and fatalities have yielded the introduction of several solutions by related industries such as automobile manufacture. Proposed solutions can be classified into two categories: passive, such as airbags, and active such as ABS ad ITS-based technologies. Inter vehicles communication let the communication between vehicles(V2V) or between vehicles and road infrastructure (V2I) by relying on DSRC technology and standards. Intelligent Transportation System (ITS) has three main types of applications namely safety, traffic and commercial. Safety applications are the main goal of vehicular communication, and real time guarantee in safety applications is so... 

Nowadays, one of the problems of network designers and users is the correctness of network equipment functionality. Since routers play an important role in information transfer between various networks and communicate with each other through a routing protocol, any violation of such protocol can result in the network's failure or defective transfer of data. Thus, being assured of the conformance of the implemented protocol in a router with what has been defined in the protocol's standard is of great significance. To this end, before using or exposing a router, network equipment testers should run protocol conformance tests on it and insure its correct functionality. This brings up the... 

In real-time systems, jobs that miss their deadline are considered worthless or ineffective. Nowadays, real-time applications (such as multimedia) that communicate through software-defined networks (SDN) are widely used and will continue to expand in the future. SDN is an emerging network architecture in which control plane is separated from data plane to manage it directly. In this research, we make changes to the controller and the switch used in such network to deliver real time packets or real-time flows (such as video) on time, as much as possible. As missed deadline packets are worthless and they waste bandwidth, dropping them is a solution. Moreover, the controller can drop flows that... 

Network Function Virtualization (NFV) is a new paradigm in computer networks for implementing network functions on general-purpose common-of-the-shelf processors. The revolutionized NFV architecture has shown to be a suitable replacement for hardware middleboxes. NFV is in high demand because of its lower costs, increased flexibility, and more scalability. However, the ever-growing volume of network traffic and increased data transfer speed in computer networks have made achieving high performance the major issue in this area. With thousands of processing cores and high memory bandwidth, Graphical Processing Units (GPUs) are potentially an appropriate solution to accelerate network... 

Recent advancement in wireless communications, electronics, low power design and also tendency to use high performance low cost products have led to emergence of Wireless Sensor Networks (WSNs). As the main purpose of a WSN is information gathering and it’s transmission to the sink node, the main problem is to deliver information correctly with minimum energy consumption. Besides, whereas the majority of developed applications for WSNs are event-critical applications, achieving reliable data transfer as the main factor of dependability and quality of service seems vital. However, data transmission is unreliable over multi-hop WSN due to the unreliability of wireless links and node failures. ... 

In this research, Friction stir welding (FSW) of 7075-O and 7075-T6 aluminum alloys was performed to investigate the effects of the base material conditions, effects of process parameters on the FSW characteristics and optimum parameters which lead to best mechanical properties of joints. The experimental results indicated that the base material condition has a significant effect on weld morphologies, weld defects, and mechanical properties of joints. The optimum parameters were 1230 rpm and 60 mm/min for 7075-O and 1230 rpm and 100mm/min for 7075-T6. Also, Double welded friction stir welding of 7075 aluminum alloy was performed to investigate the effects of the second pass of weld on the...