Sharif Digital Repository

In this research MPA capped CdTe nanocrystals with sizes around 2.7-3.5 nm were grown in aqueous solution. The process was performed through the reaction of NaHTe with MPA and CdCl2 solution in high temperature. The synthesis was carried out in two different states of standard and modified forms. In the modified synthesis, the hydrazine hydrate material was added to the MPA plus CdCl2 solution before injection. The evolution of the nanocrystals size and PL quantum yield was monitored during the heating time for the growth. The results demonstrated that for the standard synthesis the growth rate was slow. The CdTe nanocrystals with high PL quantum yields were achieved in more than 10 h of... 

During recent years, many investigations have been carried out to determine how to select different materials for the making of Micro Electro Mechanical Systems (MEMS) and bio-MEMS. The NiTi shape memory alloy thin film has been much regarded as a promising candidate for MEMS due. to its unique shape memory effect and high energy output. In this research, NiTi thin film was fabricated using a sputtering technique from separate elemental Ni and Ti targets. The characterizations of the deposited films were, investigated using different analysis techniques, such as Field Emission SEM, DSC, XR.D, electrical resistivity measurement and nanoindentation. © Sharif University of Technology, June 2009... 

Ferrite-bainite-martensite triple phase (TP) microstructures with different volume fractions of martensite were obtained by changing heat treatment time during austempering at 300 C. Room temperature impact properties of TP steels with different martensite volume fractions (VM) were determined by means of Charpy impact testing. The effects of test temperature on impact properties were also investigated for two selected microstructures containing 0 (the DP steel) and 8.5 vol.% martensite. Test results showed reduction in toughness with increasing VM in TP steels. Fracture toughness values for the DP and TP steels with 8.5 vol.% martensite were obtained from correlation between fracture... 

The strain hardening behavior of AISI 4340 steel with dual phase (DP) and triple phase (TP) microstructures with constant ferrite volume fractions of 34% was investigated. The microstructures of specimens were analyzed using an optical microscope. The tensile flow behavior of all the samples was explained using Holloman equation. Results showed that in both DP and TP steels, work hardening takes place in two stages. The onset strain of second stage of work hardening and Holloman equation parameters (work hardening exponent and strength coefficient) in both stages were increased with the increase of martensite volume fraction in TP steels. At first stage of work hardening, ferrite phase... 

This paper presents the effect of martensite volume fraction (VM) on mechanical properties of AISI 4340 steel with ferrite-bainite-martensite microstructures. The steel bars were austenitized at 900°C for 1h followed by intercritical annealing at 740°C for 100min and quenching into a salt bath with temperature of 300°C and holding at different times to obtain triple phase (TP) microstructures with 34vol.% fraction ferrite and various martensite (or bainite) contents. Presence of three phases in adjacent to each other was confirmed by metallographic analysis and TEM studies. TEM observation also indicates higher density of dislocations within ferrite near martensite colonies compared to that... 

A methodology is developed for the design of optimum viscous fluid passive energy dissipation systems using pole assignment active control algorithm. In this method, the procedure to assign the new structural poles is slightly modified such that the resulting structural properties (i.e., the optimum locations of system poles) can be achieved merely by modification of structural stiffness and addition of a passive control system. A combination of stiffness reduction and increase of damping is utilized to reduce both acceleration and displacement response. It is shown that the control systems designed using this method provide structural performances slightly better than or close to those of... 

A practical procedure is developed for the design of passive control systems using viscous fluid dampers for nonlinear structures. The design methodology takes advantage of the modification of the damping, strength, and stiffness properties of the structure to achieve the desired relative displacement and absolute acceleration response. For this purpose, a study of poles in the complex plane is used to determine the required changes in the dynamic properties of nonlinear structures. Furthermore, a relatively simple relation between the ductility demands of highly damped single- and multiple-degree-of-freedom (SDF and MDF respectively) systems is established to reduce the computational burden... 

A strategy is developed for design of passive control systems for structures experiencing inelastic deformations during earthquake loading. Besides the addition of passive energy dissipation devices, the proposed method suggests the required changes to the stiffness and strength of the structure, to reduce the absolute acceleration and relative deformation responses simultaneously. For this purpose, the locations and amounts of modifications in stiffness, strength and damping are determined by a sliding mode control algorithm to consider the nonlinear behavior of the structure. Being originally designed for active control, the sliding mode algorithm is modified to facilitate the extraction... 

ABSTARCT: A practical procedure is developed for the design of passive control systems using viscous fluid dampers for nonlinear structures. The design methodology takes advantage of the modification of the damping, strength, and stiffness properties of the structure to achieve the desired relative displacement and absolute acceleration response. For this purpose, a study of poles in the complex plane is used to determine the required changes in the dynamic properties of nonlinear structures. Furthermore, a relatively simple relation between the ductility demands of highly damped single- and multiple-degree-of-freedom (SDF and MDF respectively) systems is established to reduce the...