Sharif Digital Repository

This thesis consists of three main chapters. The first chapter is about describing principles about offshore wind turbine, principal concepts. This chapter also explains about advantages and disadvantages of installing wind turbine at offshore fields, and economical aspect of this kind of wind turbine farms. In the second chapter,anumerical method is used to investigate a SeaStar tension leg platform offshore wind turbine response behavior in parked condition. This code considers nonlinearities due to changes in tension of tethers. Wave forces are calculated adopting the Airy wave theory. Furthermore, shear turbulent wind is exerted on tower, with maximum speed 30 m/s on the hub. Since surge... 

Selective withdrawal from water and settlement reservoirs and tanks is necessary for water and environmental systems. Perforated pipes can be used for selective withdrawal within the length of these reservoirs. In this method, the lateral inflow through perforations leads to the outlet of the pipe that is placed in a depth of fluid. In relation to the hydraulics of perforated pipes, most studies are about drainage pipes and perforated pipes that are used as wellbores in horizontal wells, but application of these pipes have not been investigated in submerged situations. Capacity estimation of perforated pipes based on inside diameter of the pipe, material of the pipe, perforations of the... 

Water injection is one of the main methods of enhanced oil recovery that its success depends on exact study of main effective parameters. Saturation functions including relative permeability function and capillary pressure function are one of the effective parameters on the success of water injection projects. In many reservoirs there is wide heterogeneity and various layering that have different absolute permeability. These features result in uncertainty to measurement of curves of saturation function. Experimental studies on this field are carried out on the composite cores that show heterogeneity and layering media of reservoir. By Scaling up the saturation functions from single cores to... 

This research investigates the possibility of using the component mode synthesis (CMS) method in experimentation. It should be noted that the original idea for this project originated from an industrial problem. The main issue in this problem was the lack of sufficient equipment to conduct tests on very large structural modes and the high computational cost for their analysis. Therefore, a test platform was constructed using a scaled-down sample (approximately 1:25) with connections that closely resembled real connections. This assembly was then tested separately, and the results were compared with analytical analyses. After updating and correcting the model in several stages, the structure... 

The substructuring method provides a suitable tool to conduct modal analysis of large and complicated structures. In this method the original structure is decomposed into simpler and smaller substructures, and the dynamic properties of the resulting substructures are first evaluated independently. The original structure’s dynamic properties are subsequently estimated by coupling the substructures’ dynamic results. In this procedure, the boundary conditions need to be imposed in such a way that the overall behaviour of the original structure is properly represented. Substructuring method can be used in different types of dynamic analysis. The focus of this paper is on the modal type of... 

Most of the heavy oil reservoirs contain discontinuous shaly structures which affect fluid flow through porous media as well as oil recovery efficiency during EOR processes. However, selecting the best EOR technique which maximizes the oil recovery remains a topic of debate in the literature. In addition the effect of shale geometrical characteristics including: spacing from wells, discontinuity, orientation, number of shale streaks, shale's spacing and length on oil recovery factor are not well understood. In this work experiments have been performed on one-quarter five-spot glass micromodels. These models have been developed by a new method using laser technology. Generally, this research... 

Naturally fractured oil reservoirs represent over 20% of the world's oil reserves, while over 60% of the world’s remaining oil lies trapped in fractured reservoirs. However, relatively little success has been achieved in increasing oil production from these complex reservoirs. Water flooding process leaves much oil in the reservoir, especially in fractured reservoirs. Surfactant flooding is known to lower the interfacial tension and hence, reduces capillary forces responsible for trapping oil and increasing recovery. However, fundamental understanding how the fracture geometrical properties affect the oil recovery efficiency during surfactant flooding remains a topic of debate in the... 

The increased need for experimental verification of the seismic performance of conventional and novel structural systems has resulted in highly sophisticated dynamic test procedures. Hybrid simulation is one of the most efficient experimental methods for assessment of dynamic and rate-dependent behavior of large-scale structural systems under earthquake excitation. Compared to earthquake simulations using shake tables, hybrid simulation may have significant advantages in terms of cost, scale, geometry, and required physical mass of structures. However, recent hybrid simulations have been limited to simplified structural models with only a few degrees of freedom. Currently, the major... 

In this thesis the effects of vibro absorbing coating on vibration behavior of an aluminum sheet and also on a stiffened aluminum panel are investigated using experimental approach. Since there wasn't any information available about the used coating, to find its viscoelastic material properties, the method mentioned in ASTM E756-05 standard is employed and corresponding tests are performed.
In the next step, an analytical solution developed for the aluminum sheet with viscoelastic coating and the obtained results compared with experimentation, in order to find its prediction accuracy for loss in “loss factor” of the system in presence of coating.
To study the effect of...