Sharif Digital Repository

The expected lifetime of a power electronic converter is limited by its fragile components such as semiconductor devices and capacitors. These components are prone to wear-out failures depending on the converter mission profile and component thermal characteristics. This paper explores the wear-out failure of the power converter semiconductor devices in inverting and rectifying modes of the converter using different power factors. The obtained results show the different wear-out characteristics of a converter under rectification, inversion, and also partial-inversion/rectification modes as well as when provides reactive power support. Moreover, this paper proposes B10 lifetime curves to... 

A search for long-lived particles (LLPs) produced in association with a Z boson is presented. The study is performed using data from proton-proton collisions with a center-of-mass energy of 13 TeV recorded by the CMS experiment during 2016–2018, corresponding to an integrated luminosity of 117 fb−1. The LLPs are assumed to decay to a pair of standard model quarks that are identified as displaced jets within the CMS tracker system. Triggers and selections based on Z boson decays to electron or muon pairs improve the sensitivity to light LLPs (down to 15 GeV). This search provides sensitivity to beyond the standard model scenarios which predict LLPs produced in association with a Z boson. In... 

Lifetime is the mos important concern in Wireless Sensor Networks (WSNs) due to limited battery power of sensor nodes. Moreover, a WSN should be capable of timely fulfilling its mission without losing important information in event-critical applications. In this paper, we focus on designing an energy-efficient and energy-aware real-time routing algorithm aiming to explore the long lifetime routing schemes in which delay constraint is satisfied in the presence of lossy communication links. To achieve this goal, our energy-aware forwarding protocol utilizes an optimum distance real-time routing algorithm to minimize energy consumption in unreliable WSNs. Simulation results reveal that the... 

In this research, solar cells sensitized with CdS and PbS Nanocrystalline metal sulfides, chemically grown by SILAR, were fabricated and characterized. PV experiments including I-V test in the presence of light and dark,Vocdecay, and Electrochemical impedance spectroscopy were performed on the Cells made through this method in the presence of light and dark and in the time period of 2, 3, 6 and 10 days. From these experiments, the changes in indicators including fill factor, efficiency, open-circuit voltage, short-circuit current, lifetime of electrons in nanostructured anode electrode, recombination resistance and capacitance of the anode electrode-electrolyte interface were observed. Also,... 

Dye-sensitized solar cells (DSCs) with nanotubular TiO2 electrodes of varying thicknesses are compared to DSCs based on conventional nanoparticulate electrodes. Despite the higher degree of order in one-dimensional nanotubular electrodes, electron transport times and diffusion coefficients, determined under short-circuit conditions, are comparable to those of nanoparticulate electrodes. The quasi-Fermi level, however, is much lower in the nanotubes, suggesting a lower concentration of conduction band electrons. This provides evidence for a much higher diffusion coefficient for conduction band electrons in nanotubes than in nanoparticulate films. The electron lifetime and the diffusion length... 

The primary aim of this study is to examine the relationship between perceived service quality, customer loyalty and the firm's financial performance at the customer level in Iran's mobile telecommunication industry. "Mobile monthly budget" was considered as a moderating variable in perceived service quality-loyalty and loyalty-CLV relationships. In addition, some potentially mediating variables between perceived service quality and loyalty including customer satisfaction, perceived value, trust, affective commitment, calculative commitment and corporate image were considered in the proposed model. Data was obtained from 271 subscribers of a mobile operator in Iran via questionnaire. The... 

This study provides a stochastic dynamic programming model with a Markov chain that explicitly focuses on the customer as well as a new model for valuing the customers in the banking industry. The proposed framework calculates individual customer’s lifetime value dynamically. The study follows a stochastic dynamic programming model that is based on the Markov chain. The deduced findings are illustrated with supplementary context from an outstanding case study. The findings underline the importance of the stochastic model for calculating customer lifetime value based on customer behavior. The presented framework provides a beneficial way for future research and valuable insight for allocating... 

The deactivation of solid acid catalysts in liquid-phase alkylation of isobutane with butenes was investigated. The role of pore mouth plugging, in particular, was studied and it was found that it had a significant effect on the deactivation behavior. Simple explicit correlations were developed for catalyst lifetime in a CSTR, both in terms of time-on-stream and butene turnover per catalyst weight. The correlations were tested using available experimental data from the literature and a reasonable agreement was observed. It was shown that for a zeolitic catalyst the butene turnover per catalyst weight was proportional to the square root of catalyst loading, while it was inversely proportional... 

BACKGROUND: The clay treatment widely utilized to reduce unsaturated components in aromatic stream has a detrimental effect on catalyst lifetime. Due to the short lifetime of commercial clay, a huge number of studies have been carried out to address this problem over the last decade. This study aims to optimize the temperature for longer serviceability of clay by removal of unsaturated aliphatic components from aromatic streams through the adsorption and catalytic properties of clay. A novel process arrangement is introduced by scheduling the reuse of deactivated clay that is discarded after deactivation. RESULTS: Results showed that the suitable range of temperature for olefin removal is... 

In this article, out-of-phase thermo-mechanical fatigue (TMF) behaviours of light alloys were investigated in comparison to their high temperature low cycle fatigue (LCF) behaviours. For this objective, strain based fatigue tests were performed on the A356 aluminium alloy and on the AZ91 magnesium alloy. Besides, TMF tests were carried out, where both strain and temperature changed. The fatigue lifetime comparison demonstrated that the TMF lifetime was less than that one under LCF loadings at elevated temperatures for both light alloys. The reason was due to severe conditions in TMF tests in comparison to LCF tests. The temperature varied in TMF test but it was constant under LCF loadings.... 

We study the problem of power efficient tracking interval management for distributed target tracking wireless sensor networks (WSNs). We first analyze the performance of a distributed target tracking network with one moving object, using a quantitative mathematical analysis. We show that previously proposed algorithms are efficient only for constant average velocity objects; however, they do not ensure an optimal performance for moving objects with acceleration. Towards an optimal performance, first, we derive a closed-form mathematical expression for the estimation of the minimal achievable power consumption by an optimal adaptive tracking interval management algorithm. This can be used as... 

Lifetime is the most important concern in wireless sensor networks due to limited battery power of sensor nodes. In this paper, we focus on designing an energy-efficient and energy-aware routing algorithm, LLR, to increase the operational lifetime of multi-hop wireless sensor networks in the presence of unreliable communication links. Our proposed protocol utilizes a parameter, Broadcasting Delay, in each node associated with the hop parameters passed by a route request packet to select long lifetime paths in the network. The key point in Broadcasting Delay formulation is that it includes both node and link specific parameters. We use two different scenarios: either the link layer... 

Depletion of fossil fuels has increased the pressure on energy systems to operate in the most efficient and economical mode. This tendency promotes energy systems to operate at optimum operating conditions, which maximizes the system profit over lifetime. Recently, there have been many attempts to maximize lifetime profit. Most of them concentrate on the power generation aspect without incorporating further aspects such as system degradation and profitability through lifetime. However, the main intention of the system operators is to optimize the profitability of system at the moment of operation and not the total profitability through the system lifetime. In this study a novel approach is... 

In this paper, a new fatigue lifetime prediction model is presented for the aluminium-silicon-magnesium alloy, A356.0. This model is based on the plastic strain energy density per cycle including two correction factors in order to consider the effect of the mean stress and the maximum temperature. The thermal term considers creep and oxidation damages in A356.0 alloy. To calibrate the model, isothermal fatigue and out-of-phase thermo-mechanical fatigue (TMF) tests were conducted on the A356.0 alloy. Results showed an improvement in predicting fatigue lifetimes by the present model in comparison with classical theories and also the plastic strain energy density (without any correction... 

Mobile Ad hoc NETworks (MANET) due to different characteristics from wired networks are more vulnerable to security attacks. Construction of Intrusion Detection Systems (IDS) for MANETs is complicated by the fact that they are lack of fixed infrastructure and lack of central management for authentication and distribution of cryptographic keys. On the other hand, the network lifetime is an important issue in MANETs because of the energy power of mobile nodes is limited. In this paper is presented a proposed Method that in the first step, authorized nodes are detected by non-interactive zero knowledge technique and in the second step, nodes with the highest battery power from among authorized... 

Emerging non-volatile memories (NVMs) are known as promising alternatives to SRAMs in on-chip caches. However, their limited write endurance is a major challenge when NVMs are employed in these highly frequently written caches. Early wear-out of NVM cells makes the lifetime of the caches extremely insufficient for nowadays computational systems. Previous studies only addressed the lifetime of data part in the cache. This paper first demonstrates that the age bits field of the cache replacement algorithm is the most frequently written part of a cache block and its lifetime is shorter than that of data part by more than 27×. Second, it investigates the effect of age bits wear-out on the cache... 

In analyzing the lifetime properties of a coherent system, the concept of "signature" is a useful tool. Let T be the lifetime of a coherent system having n iid components. The signature of the system is a probability vector s=(s1, s2,., sn), such that s i=P(T=Xi:n), where, Xi:n, i=1, 2,., n denote the ordered lifetimes of the components. In this note, we assume that the system is working at time t>0. We consider the conditional signature of the system as a vector in which the ith element is defined as pi(t)=P(T=Xi: n|T>t) and investigate its properties as a function of time  

Previous studies on wireless sensor networks indicate one of the most important research topics is to consider both significance of the reduction in sensor nodes energy consumption and improving network lifetime. Regarding results of some researchers using sinks, mobility has a substantial impact on the performance of sensor networks concerning reducing total energy consumption, increasing the number of active nodes and solving the energy-hole problem. In this study, we consider hexagons beehives feature where sensor nodes are distributed across a hexagon randomly. This hexagonal is divided into equal clusters based on the radius of hexagonal. Also, the need for cluster heads to be close to...