Sharif Digital Repository

The biodegradability rates of two different kinds of polyethylene bonded with corn and potato starch are studied in this paper. While it is usual to use soil as the environment for biodegradation, an aerated sludge tank was used in this studywhich offers a richermicrobialmediumand increases the rate of biodegradation. The biodegradability is determined by two ways: first, comparing differences in the weight change of two samples, one placed inside distilled water and the other placed in aerated sludge tank. Second test for biodegradation is by examination of FTIR spectroscopy. Through FTIR spectroscopy, the biodegradability rate and reduction in some of the existing bonds in polymer before... 

The progressive-edge-growth (PEG) algorithm of Hu et al. is modified to improve the error floor performance of the constructed low-density parity-check (LDPC) codes. To improve the error floor, the original PEG algorithm is equipped with an efficient algorithm to find the dominant elementary trapping sets (ETS's) that are added to the Tanner graph of the under-construction code by the addition of each variable node and its adjacent edges. The aim is to select the edges, among the candidates available at each step of the original PEG algorithm, that prevent the creation of dominant ETS's. The proposed method is applicable to both regular and irregular variable node degree distributions.... 

In this paper, we consider the application of Low-Density Parity-Check (LDPC) codes in multi-carrier frequency-hopping (MC-FH) CDMA systems. We evaluate the performance of the coded system in a slowly Rayleigh fading frequency-selective channel using different construction methods of regular LDPC codes. We then compare the results with those of the Super-Orthogonal coded system. Our simulation results show that the LDPC coded scheme significantly outperforms the uncoded and the Super-Orthogonal coded scheme. Finally, we propose a new semi-random construction of regular LDPC code and evaluate its performance in MC-FH-CDMA system. Our numerical results indicate that this new construction... 

Recently, V. Sorokine et al. (see IEEE Trans. Commun., vol.48, no.10, p.1660-8, 2000; vol.48, no.11, p.1818-28, 2000) have introduced a class of low-density parity-check (LDPC) codes which, when applied on an IS-95 CDMA system, show, at BER=10-3, a five-fold and two-fold increase in capacity compared to the traditional uncoded scheme and to state-of-the-art low-rate orthogonal convolutional codes, respectively. However, these codes suffer from an error-floor at lower BERs which are needed for high-quality services, such as data. To enhance the capacity of CDMA systems, not only for moderate BER values but also for lower BER values, we modify the construction of these codes slightly, to... 

The oxidation of ferrous iron in solution using Acidithiobacillus ferrooxidans has industrial applications in the regeneration of ferric iron as an oxidant agent for the removal of hydrogen sulfide from waste gases, desulphurization of coal, leaching of non-ferrous metallic sulfides and treatment of acid mine drainage. The aim of this attempt was to increase the biooxidation rate of ferrous sulfate by using immobilized cells. Rate of ferrous iron oxidation was determined in a packed-bed reactor configuration with low density polyethylene (LDPE) particles as support material in order to find the most practical system for scale-up. The present work studies the influence of basic parameters on... 

In this research, low density polyethylene (LDPE) and poly(ethylene-co-vinyl acetate) (EVA) were used as polymeric materials. The methods used to produce LDPE and EVA was film blowing and thermal-dry phase inversion. The amount of permeability, diffusivity and solubility of O2 and CO2 through above polymers were obtained and also the effect of temperature, pressure and film thickness for LDPE was measured. To study film cross-section morphology in EVA, scanning electron microscopy (SEM) was applied. The results showed that the amount of permeability and solubility were decreased by increasing film thickness but diffusivity was increased. However, by increasing temperature, permeability,... 

In this research, low density polyethylene (LDPE) and poly ethylene-co-vinyl acetate (EVA) were used as polymeric materials. The methods used to produce LDPE and EVA was Film Blowing and ThermalDry Phase Inversion. The amount of permeability, diffusivity and solubility of O2 and CO2 through above polymers were obtained and also the effect of temperature, pressure and film thickness for LDPE was measured. The Barometric method was considered and measurements were based on ASTM standard. To study film cross-section morphology in EVA, Scanning Electron Microscopy (SEM) was applied. From results we considered that the amount of permeability and solubility were decreased by increasing film... 

Ethylene-vinyl acetate-based nanocomposites with 18 and 28 wt% vinyl acetate were prepared via solution casting method. To improve the mechanical and barrier properties of ethylene-vinyl acetate, linear low-density polyethylene, and graphene oxide were introduced to matrix. The morphological studies indicated that the graphene oxide diffraction peak disappeared in all prepared nanocomposites, probably due to its exfoliation; also proper dispersion and good interaction between nanofillers and polymer matrix were achieved. By introducing low amount of graphene oxide into the matrix, the mechanical and thermal properties and oxygen permeability were improved especially for those with 28 wt%... 

In this paper, new sequences (λn,ρn) of capacity achieving low-density parity-check (LDPC) code ensembles over the binary erasure channel (BEC) is introduced. These sequences include the existing sequences by Shokrollahi as a special case. For a fixed code rate R, in the set of proposed sequences, Shokrollahi's sequences are superior to the rest of the set in that for any given value of n, their threshold is closer to the capacity upper bound 1 - R. For any given δ, 0 < δ < 1 - R, however, there are infinitely many sequences in the set that are superior to Shokrollahi's sequences in that for each of them, there exists an integer number n0, such that for any n > n0, the sequence (λn, ρn)... 

Heart attack is one of the most common causes of death in the world. Coronary artery disease is the most recognized cause of heart attack whose onset and progression have been attributed to low-density lipoprotein (LDL) passing through the wall of the artery. In this paper, hemodynamic variables as well as the concentration of LDL through the coronary porous artery at the Left Anterior Descending coronary artery (LAD), and its first diagonal branch (D1) under the heart motion investigated using computational simulation. The geometry that has been studied in this paper is the first bifurcation of Left Anterior Descending (LAD) that has been placed on a perimeter of hypothetical sphere...