Sharif Digital Repository

The present simulation aims to investigate adding NEPCM nanoparticles to water in the natural convection inside a cavity by using FVM method and SIMPLE algorithm. Nano-encapsulated phase change material (NEPCM) consists of a shell and core with phase change property. The NEPCM particles in base fluid have the ability to transfer heat by absorbing and dissipating heat in the liquid-solid phase change state. In this study, the energy wall phenomenon due to the phase change of NEPCM core has appeared that the whose energy transfer strength is proportional to the latent heat of NEPCM core and the thickness of the energy wall. Moreover, the relationship between the energy wall and the heat... 

In modern heat transfer systems, thermal storage not only causes the balance between demand and supply, but also improves the heat transfer efficiency in these systems. In the present study, a comprehensive review of the applications of micro- or nano-encapsulated phase change slurries (MPCMs/NPCMs), as well as their effects on thermal storage and heat transfer enhancement, has been conducted. MPCMs/NPCMs have a myriad of applications and various usages such as pipe and channel flows, photovoltaic/thermal, solar heaters, air conditioning systems, storage tanks and heat pipes that have been categorized and studied. It was found that there are many advantageous adding MPCM/NPCM to the base... 

Due to size minimization and increment in the frequency of electronic devices, efficient and reliable methods for thermal management are required to reduce operating temperature, enhance stability, increase lifetime and user comfort. To prevent the damages of leakage and corrosion which occur in conventional heat sinks, proposing innovative thermal management methods has always been welcomed. Regarding these issues and based on the energy storage unit concept, in this study, a passive heat sink (HS) is fabricated and characterized for electronic chipset cooling with heat fluxes of 2000 to 4000 W/m2 utilizing phase change material (PCM) and nano-additive PCM (NPCM). The presented cooling... 

In this study a 2D cubic chamber model filled with paraffin is analyzed with and without the inclusion of magnetic Fe3O4 nanoparticles at concentrations of 0.5, 1, 1.5 and 2 wt%, and an external magnetic field of intensities 0.005, 0.01, 0.015 and 0.02 T. It is ascertained that adding magnetic nanoparticles leads the horizontal temperature gradient to be reduced owing to increments in thermal conductivity. Additionally, this feature is found to be accelerated by applying an external magnetic field, which shapes highly conductive cluster formations of nanoparticles. However, since the increase in nanoparticle concentration and magnetic intensity increases the composite viscosity, there is an... 

In this study, an experimental investigation of using the radiative cooling potential in a solar still was studied. Instead of using an auxiliary radiative panel, an integrated collector was utilized for both processes of absorption of solar radiations and emission of infrared radiations for radiative cooling. At night-time, the coldness was stored in the PCM inside the PCM-condenser. While during the day, the water was evaporated in an evaporation tank, the produced vapor was directed to the PCM-condenser and the air cooled-condenser. Different condenser configurations were tested to evaluate the effect of radiative cooling on daily yield and solar still efficiency. The lower temperature of... 

In this study, a mixture of nano-encapsulated phase change materials in water has been used as the working fluid in a pulsating heat pipe in order to investigate its thermal performance. The results of the experiments showed that using the nano-encapsulated paraffin dispersed in water as working fluid improves heat transfer and decreases the thermal resistance of the pulsating heat pipe. On the other hand, among the tested concentrations for nano-encapsulated paraffin, there is an optimal value in which increasing the concentration causes an increase in the thermal resistance of the pulsating heat pipe due to the increased dynamic viscosity of the fluid. Enhancement in the thermal... 

Despite the fact that solid–liquid phase change materials (PCMs) have various applications in thermal energy storage systems, the low solidification rate of PCMs, which is due to the low thermal conductivity has limited the range of applications of PCMs. One of the methods of increasing the solidification rate of PCMs is using a boiling fluid as an intermediary between the solid–liquid PCM and the condenser to prevent the direct contact between the phase change material and the condenser tubes, this method is also known as the intermediate boiling fluid (IBF) method. The IBF method has been shown to significantly increase the solidification rate (2 orders of magnitude). In this study, the... 

Thermal energy storage (TES) occurs by changing the internal energy of materials in the form of sensible heat, latent heat, and thermo-chemical heat or a combination thereof. Latent heat storage (LHS) by phase change materials (PCMs) has many applications among these storage techniques. Despite the many advantages of LHS, the main problem of LHS systems using PCMs is their low thermal conductivity, which necessitates the combination of heat transfer enhancement techniques. Numerous diverse studies have utilized only one improvement method, while limited research has employed hybrid enhancement techniques. The typical improvement methods, such as adding nanomaterials, using fins, employing... 

This paper presents a numerical simulation approach to investigate the water effect as an auxiliary fluid in direct contact with various phase change materials (PCMs). The technique is defined as a hybrid method due to the using of an external intermediary for melting process improvement. Oleic acid (OA), coconut oil (CO), hexadecane, and heptadecane are selected as PCMs due to immiscibility in water and differences in density, melting point, and enthalpy of fusion. An auxiliary fluid is embedded above PCM in an enclosure subjected to sinusoidal wall temperature for melting rate increase through density differences improving heat transfer rate due to materials displacement during process.... 

Drying is a common practice for delaying deterioration, preserving quality, and easier prolonged storage of agricultural products. According to the climatic and geographical conditions of Arsanjan County, Fars, Iran. So far, many studies have been conducted on the design and use of various barriers on absorber plates with the aim of increasing heat exchange and subsequently increasing the efficiency of air heaters and solar dryers. However, the effect of using the metal of the sewing machine bobbin on the performance of these dryers has not been studied yet. Therefore, in this study, for the first time, this metal and also pipes containing PCM (phase change material) were used as a barrier... 

As one of the cleanest energies, hydrogen has attracted much attention over the past decade. Hydrogen can be produced using water electrolysis in a Proton Exchange Membrane Electrolysis Cell (PEMEC). In the present study, the performance of the PEMEC, powered by the Photovoltaic-Thermal (PVT) system, is scrutinized. It is considered that the PVT system provides the required electrical power of the PEMEC and preheats the feedwater. A comprehensive numerical model of the coupled PVT-PEMEC system is developed. The model is used to investigate the effect of various operating parameters, including solar radiation intensity, inlet feedwater temperature, and feedwater mass flow rate, on the... 

Massive amounts of spent lead-acid battery separators with 50 wt % silica nanoparticles (SiNPs) can be recycled for further use. One compelling application is form-stable phase change materials (FSPCMs). This study proposes a novel tertiary eutectic mixture of green and non-toxic lauric acid, palmitic acid, and paraffin, and recycled SiNPs to find a sustainable approach to deal with industrial wastes and energy consumption. Fatty acids and paraffin are promising for thermal energy storage in buildings. However, they lack sufficient thermal conductivity, mechanical strength, and suffer from leakage. To give mechanical strength, high-density polyethylene (HDPE) was added and sintered....