Sharif Digital Repository

Solar chimney is one of the attractive approaches to produce power from a clean source of renewable energy. In this investigation, a potentiometric study is carried out to find out a best location for construction of a solar chimney in different climates of Iran, in the Middle East. With this objective, three locations with different weather climates were chosen, i.e. Tehran, Semnan, and Bandar Abbas. These locations were chosen due to their different climatic conditions and solar irradiation. The used weather conditions are extracted for the middle day of summer, 6th August. The output power of the solar chimney plant was assessed as a function of various thermo-physical properties such as... 

Considering hydrogen as a future fuel, development of clean approaches based on solar energy conversion is the main human challenge. Here, for the first time, TiO2 photoanodes are decorated with Au-Ag alloy nanoparticles for efficient photoelectrochemical water splitting. The photoanodes were synthesized using a one-step co-sputtering method. The single surface plasmon resonance peak at 540 nm and also the observed shifts in photoelectron binding energies are fingerprints of homogenous alloyed nanoparticles. Scanning electron microscopy revealed the formation of nearly 40 nm particles on the surface, which was also verified by the simulation of the film's optical absorption. Photocurrent... 

Most part of Iran is dominated by arid and semi-arid areas due to low annual rainfall. The need for production of fresh water from brackish water is considerably high, especially in dry regions. In this study 1 month daily-based experimental data from a solar still site has been reported. The technical and operational problems of this site which finally contributed to the total cease of the site are described. Then a detailed analysis is investigated on progress of a prototype which constructed in order to solve the site's problems. The results of 1 month of experimental data of the final design showed that the last prototype could be used to solve the current problems of the site. The... 

A NiOx−graphene oxide (NiOx−GO) hybrid has been prepared by a simple solution-processed method and was used as hole-extraction material in perovskite solar cells with either gold or carbon as back contact electrode. The impact of GO content on the optoelectronic behavior of NiOx and the photovoltaic performance of the fabricated devices has been studied. Thus, GO incorporation showed a significant improvement in the performance of NiOx-based devices. The best attained efficiency was 13.3%, and it was 45% higher than that with pure NiOx. This is attributed to a significant improvement in the hole extraction, recombination resistance, and energy-level matching in comparison to pure NiOx. In... 

Functional perovskite solar cells can be made by using a simple, inexpensive and stable soluble tetra-n-butyl-substituted copper phthalocyanine (CuBuPc) as a hole transporter. In the present study, TiO2/reduced graphene oxide (T/RGO) hybrids were synthesized via an in situ solvothermal process and used as electron acceptor/transport mediators in mesoscopic perovskite solar cells based on soluble CuBuPc as a hole transporter and on graphene oxide (GO) as a buffer layer. The impact of the RGO content on the optoelectronic properties of T/RGO hybrids and on the solar cell performance was studied, suggesting improved electron transport characteristics and photovoltaic parameters. An enhanced... 

Identifying and reducing the dominant recombination processes in perovskite solar cells is one of the major challenges for further device optimization. Here, we show that introducing a thin interlayer of poly(4-vinylpyridine) (PVP) between the perovskite film and the hole transport layer reduces nonradiative recombination. Employing such a PVP interlayer, we reach an open-circuit voltage of 1.20 V for the best devices and a stabilized efficiency of 20.7%. The beneficial effect of the PVP interlayer is proven by statistical analysis of various samples, many of those showing an open-circuit voltage larger than 1.17 V, and a 30 mV increase in average compared to unmodified samples. The reduced... 

In this research, we employed transient photo-voltage rise and decay measurements to investigate the origin of slow unsymmetrical rise and decay profiles in single and triple cation perovskite solar cells. Drastic changes in photo-voltage decay profile were observed upon insertion of Br−, Cs+ and FA+ ions into perovskite structures. In order to explain our observations, the activation energy for ionic defects was measured and an equivalent circuit model was proposed containing both electrical and ionic components. The electrical branch consists of a diode, the bulk capacitance and resistances for charge transport and recombination. In parallel we introduced an ionic branch describing the... 

Solar collecting area is one of the most important operating parameters of active solar stills. No experimental work has been performed to investigate the effect of this parameter to date. Furthermore in all of previous theoretical studies the effect of solar collecting area was examined during only the first 24-hour period of the operation of stills with one specified brine depth. However the present work experimentally studies the long-term simultaneous effects of collector area and brine depth on the performance of active solar stills. For this purpose four parallel active solar stills with different collector areas were fabricated and experiments were conducted for 5 consecutive days... 

In this paper, a new radiation model for a single-slope solar still has been developed which for the first time takes into account the effect of all walls of the still on the amount of incident solar radiation on the water surface and each wall. In this model, the walls are projected on the cover to calculate the amount of beam radiation received by any components inside the still. This is in contrary to the previous models in which stills' walls were projected on a horizontal surface and their shadows on the water surface and the walls were either neglected or not computed properly. The predictions of the proposed model are compared with the experimental data obtained in the present work... 

In the present work, effects of height, length, and width of a single-slope basin-type solar still on its distillate production was investigated. For this purpose, a radiation model was developed which accounts for the influences of all walls on quantities of received solar radiation by the base and saline water of the still. Moreover, in this radiation model, the side walls of the still were considered as the trapezoid and the diffuse as well as beam components of solar irradiance were separately taken into account for the first time. Abilities of the present model were compared with earlier ones. Furthermore, the predictions of the current model were compared with the present experimental... 

One of the most important operating parameters which affects the performance and efficiency of active solar stills is brine depth. In all of the previous experimental or theoretical studies, effects of water depth were investigated during only the first 24-hour period (or even shorter periods) of the operation of active solar stills. In other words, only the first day was taken into account. However, the production of an active solar still depends on several parameters such as brine temperature at sunrise (initial temperature), which are all affected by the depth variation after the first day of operation. However, the present research experimentally investigates the long-term effects of... 

The present work investigated the outdoor performance of a basin type multi-stage solar still as well as the effect of collector over basin area (CBA) ratio on the distillate production. The effect of CBA was studied in outdoor experiments for the first time. The system consisted of a still coupled with one, two or three flat-plate solar collectors. In order to study the effect of CBA more accurately, the experiments were conducted in both winter and summer. In these experiments, the distilled water production of the multi-stage still was measured during the whole 24. h of a day on an hourly basis. The results revealed that in the winter, the basin coupled to one solar collector (CBA. =... 

As efficiency of PV modules decreases with temperature rise, cooling methods can increase the power output and efficiency. One of the strategies for this purpose is passive cooling by implementing fins to the backside of a module. In the present study, annual energy output of a 50 W panel is analytically calculated in two unfinned and pin-finned cases based on hourly meteorological data for Shiraz, Iran. The results show that with the installation of 2-cm, 4-cm and 6-cm aluminum pin fins with finned-to-total-backside-area ratios of 0.17, 0.27 and 0.55, the power output increases by 1.24–4.16%, compared to the unfinned case. This increase is equivalent to 1.04–3.50 kWh more electrical energy... 

Antisolvent crystallization is known as an effective approach for the deposition of pinhole-free solution-processed perovskite layers for high-performance solar cells. Here, we introduce a modified antisolvent dripping method by adding tetra ethyl orthosilicate (TEOS) into chlorobenzene as a conventional antisolvent. Through TEOS modification, perovskite solar cells show efficiencies as high as 16% with more than 85% retention after 290 h storage at ambient conditions in comparison to 20% in pristine cells. This significant enhancement in efficiency and stability mainly related to the decrement of the density of surface defects, which is confirmed by considerably enhanced photoluminescence... 

This research is dedicated to show the possibility of using solar radiation pressure by solar sails for interplanetary flights. In this paper, in addition to the Introduction of solar sailing and physics of solar radiation pressure, the solar sail orbital dynamics for optimal trajectory of an ideal solar sail spacecraft has been studied. It considers the problem of optimal controlling the sail angle so as to execute a minimum-time coplanar orbit transfer from the circular initial orbit to the circular target orbit. The direct collocation optimal control technique is used to transform the state equations to a set of nonlinear algebraic constraint equations. The results of state and control... 

In common solar stills, a portion of the produced vapor undesirably condenses on the sidewalls and runs down to be mixed with saline water in the basin. This results in lower distillate output of the system. The aim of this study was to improve the condensation process of a solar still without complicating its structure to collect the water condensed on sidewalls. The proposed solar still was made of two containers nested one inside the other such that the smaller container, containing saline water, fitted easily into the larger container. There was a thin gap between the two in which condensed liquid on sidewalls, ran down and was collected from the bottom of the larger container. The... 

The paper studies the optimum panel horizontal orientation angle toward the Sun and the optimum time interval of the panel’s movement. The optimum time intervals or panel movement can change the rate of input energy to the panel surface in Iran. For this purpose, a neural network has been trained to estimate the intensity of solar radiation in Iran. After model validation, the intensity of solar radiation has been estimated by selecting adequate geographical regions. Based on the intensity of sunlight, Iran has been divided into ten regions. In these regions, 40 cities have been randomly selected to study the effect of the panel’s angle variations within appropriate time inter-vals, as well... 

Recent advancements in photovoltaic (PV) system technologies have decreased their investment cost and enabled the construction of large PV farms for bulk power generations. The output power of PV farms is affected by both failure of composed components and solar radiation variability. These two factors cause the output power of PV farms be random and different from that of conventional units. Therefore, suitable models and methods should be developed to assess different aspects of PV farms integration into power systems, particularly from the system reliability viewpoint. In this context a reliability model has been developed for PV farms with considering both the uncertainties associated... 

In this research, for the first time, the effect of primary particles (boulders) and secondary particles (fines) in organic mixtures of coffee, black walnut hull, madder, and tea (which are cheap, abundant, and biodegradable) on the improvement of solar stills' daily efficiency is evaluated as an alternative to metal-based nanofluids. A laboratory still simulator is utilised under laboratory conditions to measure the organic mixture's behaviour accurately. Furthermore, the effect of the concentration of organic mixtures and the particle size of organic materials are investigated, as well as the effect of boulders and fines, independently. In addition, two identical solar still systems are...