Sharif Digital Repository

A numerical study has been performed to investigate the flow and heat transfer characteristics of fluid flow through heat exchanger tubes fitted with perforated conical rings. The holes are circular, and the number of holes N is ranged from 0 to 10. The influences of perforated conical ring diameter ratios D2/D1=0.4,0.5and0.6 and the hole diameter ratios d/D=0.06,0.1and0.14 on average Nusselt number, friction factor and thermal performance factor are reported. This analysis is performed in the turbulent flow regime 4000⩽Re⩽14,000 and the governing equations are solved by using (RNG) k-∊ model. Due to strong turbulent intensity, perforated conical rings lead to more flow perturbation and... 

In this paper, new arrangements of triangular winglet as a turbulator are numerically studied through a cylindrical tube. Triangular winglets are commonly placed on one side of a rectangular plate and inserted inside the tube. However, in present work, the winglets are located on both sides of the rectangular plate to further enhance the thermal performance of the fluid flow through the tube. Both backward and forward configurations of the winglets are analysed. Moreover, despite the importance of “latitudinal pitch of the winglets” and “winglet-plate angle” no investigation has been evaluated these parameters which will be evaluated in this work. Moreover, as no exergetic evaluation has... 

For the present article, a pulsating heat pipe (PHP) is fabricated and tested experimentally by bending a copper tube. The effects of working fluid, heat input, charging ratio, inclination angle, magnets location, and ferrofluid (magnetic nanofluid) volumetric concentration have been investigated on the thermal performance of this PHP. Experimental results show that using ferrofluid as a working fluid improves the thermal performance of the PHP significantly. Moreover, applying a magnetic field on a ferrofluidic PHP reduces its thermal resistance. By changing the inclination angle of the PHP from vertical mode to angles close to the horizontal mode, the present PHP has a constant and... 

Domed roofs have been used in Iran and many other countries to cover large buildings such as mosques, shrines, churches, schools. They have been also employed in other buildings like bazaars or market places in Iran due to their favorable thermal performance. The aim of this research is to study about domed roofs thermal performance in order to determine how they can be helpful in reducing the maximum air temperature of inside buildings during the warm seasons considering all parameters like air flow around them, solar radiation, radiation heat transfer with the sky and the ground as well as some openings on the building. The results of the study show that the thermal performance of the... 

In this study, an experimental investigation was conducted from a thermal performance standpoint on closed-loop pulsating heat pipes (CLPHPs) with four different fluids and their water-based binary mixtures as working fluids with volume mixing ratios of 3:1, 1:1, and 1:3. Ethanol and acetone as two types of fluids that are soluble in water and, to unprecedentedly compare the behavior of insoluble mixtures with the soluble ones as the working fluids, toluene and hexane as two types that are insoluble in water were used. Additionally, to predict the thermal performance of the pure, soluble binary, and insoluble binary fluids simultaneously for the first time, a correlation was derived. © 2018... 

In this study, an experimental investigation was conducted from a thermal performance standpoint on closed-loop pulsating heat pipes (CLPHPs) with four different fluids and their water-based binary mixtures as working fluids with volume mixing ratios of 3:1, 1:1, and 1:3. Ethanol and acetone as two types of fluids that are soluble in water and, to unprecedentedly compare the behavior of insoluble mixtures with the soluble ones as the working fluids, toluene and hexane as two types that are insoluble in water were used. Additionally, to predict the thermal performance of the pure, soluble binary, and insoluble binary fluids simultaneously for the first time, a correlation was derived. © 2018,... 

Numerical simulations are used to analyze the thermal performance of turbulent flow inside heat exchanger tube fitted with cross-cut twisted tape with alternate axis (CCTA). The design parameters include the Reynolds number (5000 < Re < 15; 000), cross-cut width ratio (0:7 < b=D < 0:9), cross-cut length ratio (2 < s=D < 2:5), and twist ratio (2 < y=D < 4). The objective functions are the Nusselt number ratio (Nu=Nus), the friction factor ratio (f =fs), and the thermal performance (g). Response surface method (RSM) is used to construct second-order polynomial correlations as functions of design parameters. The regression analysis shows that heat transfer ratio decreased with increasing both... 

In the current research, a three-dimensional photovoltaic thermal system integrated with phase change material system with nanofluids is investigated. The working fluids involved in this study include nano-magnesium oxide, multiwall carbon nano tube and hybrid (mixture of nano-magnesium oxide and nano-multiwall carbon nano tube) nanofluids dispersed in pure water. After comparing single-phase model and mixture model, the mixture model is used in the study and fluid flow regime in the collector is assumed to be laminar, fully develop, uniform and incompressible, to model the nanofluid in the system. A parametric analysis is conducted to examine the effect of various parameters such as working... 

A Ground Source Heat Pump (GSHP) is a renewable energy-based HVAC system that extracts or supplies heat from/to the ground via a Ground Heat Exchanger (GHE). One of the most commonly used types of GHE in GSHP systems is the energy pile. In this realm, the GSHP system with a triple helix energy pile has become the focus of attention. To this aim, a comprehensive three-dimensional transient Computational Fluid Dynamics model of the energy pile with triple helix GHE and the surrounding soil is developed. The effect of several parameters, including helix pitch, helix diameter and pipe diameter, on the thermal performance of the system, is investigated. Simulated cases are chosen using the design... 

Thermal management of electronic devices is presently a serious concern. This article investigates the thermal performance of a five-turn open-loop pulsating heat pipe in both start-up and steady thermal conditions. The effects of working fluid, namely water and ferrofluid, heat input, charging ratio, ferrofluid concentration, orientation, as well as application of magnetic field, are explored. Experimental results show that using ferrofluid enhances the thermal performance in comparison with the case of distilled water under certain conditions. In addition, applying a magnetic field on the open-loop pulsating heat pipe charged with ferrofluid improves its thermal performance. Charging... 

Pulsating heat pipes (PHPs) are interesting heat transfer devices. Their simple, high maintaining, and cheap arrangement has made PHPs very efficient compared to conventional heat pipes. Rotating closed loop PHP (RCLPHP) is a novel kind of them, in which the thermodynamic principles of PHP are combined with rotation. In this paper, effect of rotational speed on thermal performance of a RCLPHP is investigated experimentally. The research was carried out by changing input power (from 25. W to 100. W, with 15. W steps) and filling ratio (25%, 50%, and 75%) for different rotational speeds (from 50. rpm to 800. rpm with an increment of 125. rpm). The results presented that at a fixed filling... 

Currently, the thermal management of microelectromechanical systems (MEMS) has become a challenge. In the present research, a micro pulsating heat pipe (MPHP) with a hydraulic diameter of 508 lm, is experimented. The thermal performance of the MPHP in both the transient and steady conditions, the effects of the working fluid (water, silver nanofluid, and ferrofluid), heating power (4, 8, 12, 16, 20, 24, and 28 W), charging ratio (20, 40, 60, and 80%), inclination angle (0 deg, 25 deg, 45 deg, 75 deg, and 90 deg relative to horizontal axis), and the application of magnetic field, are investigated and thoroughly discussed. The experimental results show that the optimum charging ratio for water... 

In the present research an experimental investigation is performed to explore the effects of working fluid, heat input, ferrofluid concentration, magnets location, and inclination angle on the thermal performance of an Open Loop Pulsating Heat Pipe (OLPHP). Obtained results show that using ferrofluid can improve the thermal performance and applying a magnetic field on the water based ferrofluid decreases the thermal resistance. It shows that at an inclination angle of the OLPHP to be zero, the thermal performance of the present OLPHP reduces. Best heat transfer capability was achieved at 67.5 degree relative to horizontal axis for all of working fluids. Variation of the magnets location... 

In this work, a four-turn Pulsating Heat Pipe (PHP) is fabricated and tested experimentally. The novelty of the present PHP is the capability of obtaining various thermal performances at a specific heat input by changing the magnetic field. The effects of working fluid (water and ferrofluid), charging ratio (25%, 40%, and 55%), heat input (25, 35, 45, 55, 65, 75, and 85 W), orientation (vertical and horizontal heat mode), and magnetic field on the thermal performance of PHPs are investigated. The results showed that applying the magnetic field on the water based ferrofluid reduced the thermal resistance of PHP by a factor of 40.5% and 38.3% in comparison with the pure water case for the...