Sharif Digital Repository

Sodium Hydroxide production industry is among the largest chemical industries that annually produces 66 million tons worldwide. NaOH which is produced through electrochemical cells needs to be further enriched. The use of membrane technology as a substitute for conventional processes has been a point of interest. Thin film composite membrane is among favorable membrane because of its ability to be customized layer by layer individually. In this thesis, for the purpose of making an optimized membrane for NaOH enrichment, we studied the preparation conditions and witnessed that by increasing MPD from 1.5 %wt. to 4.5%wt. The flux experiences a minimum at 3.5%wt, which is the maximum for... 

In this study, surface modification of Thin-film composite (TFC) membranes was performed in order to enhancement of its performance and chlorine resistance. TFC membranes was prepared through the interfacial polymerization between m-phenylenediamine (MPD) and trimesoyl chloride (TMC) on the polysulphone support membrane and surface modification performed through redox initiated graft polymerization of acrylic amide followed by acrylic acid. The successful surface modification of TFC membranes was evident from attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), contact angle (θ), scanning electron microscope (SEM) and atomic force microscope (AFM). Changes in... 

In this study preparation of polymeric membrane for grey water treatment is examined. Grey water is the wastewater that is produced by household activities such as baths, showers and sinks. These sources make 50 to 80 percent of total household wastewater. Because of low contamination of these kind of wastewater, they can be treated with Nanofiltration membrane process. Membrane used for treatment is thin composite polyamide membrane. This membrane is made with interfacial polymerization reaction of Piperazine and m-phenylenediamine as amine monomer and trimesoyl chloride as chloride acid monomer on a Polysulfone ultrafiltration membrane. In order to promote the flux, Polyethylene glycol is... 

In this research, a homogeneous elastic half-space with transversely isotropic behavior, reinforced by an isotropic thin membrane is investigated under static loading with an analytical approach. The membrane is considered as an infinite plane with a thickness of negligible and buried at the arbitrary depth from the surface of the half-space, also its flexural strength is neglected and only the in-plane stiffness is considered for it. The reinforced half-space is investigated under several concentrated and distributed static loads, which are applied to the surface of the half-space or buried at the depth of the membrane. The membrane is first modeled as a three-dimensional elastic layer and... 

The forward osmosis (FO) process is a high potential emerging membrane process in the seawater desalination and contaminated water treatment fields. One of the main challenges facing this process is the weak separation (high reverse solute flux, low water flux, and insufficient selectivity) and antifouling performances of its membranes. Various sections of this study focus on the development of FO membranes and their performance improvement. For this purpose, thin-film composite membranes with the same combination of polyethersulfone/polyamide (PES/PA) have been used to investigate the effect of metal-organic frameworks (MOFs) introduction on their performance. The support layer in all cases...