Sharif Digital Repository

Time-variant axial and radial electromagnetic for ces under inrush current and short-circuit current are calculated (by finite element method; FEM) and compared. A simplified analytic method is presented for computation of inrush current in transformer. The simulation results obtained by this method are compared with the measured values. A compact three-phase, core-type 132/20 KV, 30 MVA, power transformer is modeled, employing two-dimensional (2D) FEM, the different forces under short-circuit and inrush current conditions are evaluated as a function of time. The simulation results for this sample transformer show that the inrush current axial force is larger than clamping force (which is... 

This article introduces a new time-varying model to generate synthetic non-stationary acceleration records using the modified Kanaii-Tajimi model with time-variant parameters. The proposed method can capture two different dominant frequencies per time which makes it suitable for synthesizing the near-field no-pulse earthquake records. A number of closed-form relationships are developed to describe the frequency dependent time-domain level crossings of the simulated records under white noise excitation. The model parameters are optimized using the crossing and Arias intensity properties of the synthetic and target records. The efficiency of the proposed model is demonstrated using a data base... 

A systematic method to design high power and high efficiency mm-wave fundamental oscillators is presented. By using a linear time variant method, we first obtain the optimum conditions and show that these conditions can be significantly different for high power and high efficiency fundamental oscillation. Next, we propose a modified multistage ring oscillator with interstage passive networks to exploit the full capacity of the transistors in terms of output power or efficiency. Analytical expressions are also derived to determine the value of passive elements used in the oscillator. To verify the validity of the method, a 77-GHz two-stage (differential) VCO is designed in a 65-nm CMOS... 

This paper proposes an analytical model based on winding function method for analysis of linear sinusoidal area resolver. The accuracy of the proposed model is verified using 3-D time variant finite element analysis and then an optimization based on genetic algorithm is employed for performance improvement of the sensor. Afterwards, the influence of longitudinal end effect on the position error of the studied sensor is investigated and a proper compensating method is presented. Finally, the optimal, compensated sensor is built for experimental measurements. Close agreement between the simulation and the measured position verified the design, analysis, and optimization process. © 2001-2012... 

Multi-turn resolvers are proposed to be used in high accuracy, high-reliability applications that need to have the benefits of absolute measurement and high accuracy, simultaneously. In this paper, the influence of different arrangements of rotary transformer (RT) and resolvers' core on the accuracy of a multi-turn wound rotor (WR) resolver is discussed. Then, an optimal configuration with the aim of reducing the total cost, and the total volume of the sensor is proposed. All the analysis is done using 3-D time-variant finite element method (3-D TVFEM) and the optimal structure is built for experimental tests. Finally, experimental measurements are employed to verify the simulation results.... 

This paper puts forward a new methodology for time-variant seismic risk analysis of transportation networks. Risk here denotes the probability of exceeding the sum of direct loss due to repair costs of bridges in the network and indirect loss due to the reduced capacity for traffic flow. The proposed methodology employs reliability methods and a host of probabilistic models for earthquake events, damage, repair cost, downtime, and travel time, while accounting for time-varying phenomena of aging and discounting. A comprehensive application on the transportation network of Isfahan, Iran, is presented that features 64 bridges subject to seismicity from seven sources. © 2018 Taylor & Francis... 

This paper puts forward a new methodology for time-variant seismic risk analysis of transportation networks. Risk here denotes the probability of exceeding the sum of direct loss due to repair costs of bridges in the network and indirect loss due to the reduced capacity for traffic flow. The proposed methodology employs reliability methods and a host of probabilistic models for earthquake events, damage, repair cost, downtime, and travel time, while accounting for time-varying phenomena of aging and discounting. A comprehensive application on the transportation network of Isfahan, Iran, is presented that features 64 bridges subject to seismicity from seven sources. © 2018, © 2018 Taylor &... 

A major challenge in automatic irrigation of extensive agricultural fields is large scale soil moisture monitoring. Proper orthogonal decomposition (POD) is a widespread data-driven dimension reduction technique which can be combined with QR pivoting method for estimation of high-dimensional signals and optimal sensor placement. However, it requires computation of tailored basis functions which should be extracted from known training data. This is feasible for problems with constant features such as face recognition. However, using fixed bases (and probably fixed sensor selection) may not be an appropriate approach for estimation of signals with time-variant features. This paper demonstrates... 

There has been great demand for shape memory alloy (SMA) wires as actuators for shape control of flexible structures. The experimental setup of this study consists of a flexible beam actuated by two active SMA actuators. The input applied to the SMA actuator in this setup is electrical current while the output is the strain or position. To control strain of the actuator, the SMA wire is heated resistively in order to reach the desired temperature calculated by inverse of the phenomenological model. In heating the SMA wire resistively, the controllable quantity is the heat input to the wire via an applied current. In controller design, changes of physical properties of SMA wires and the... 

Tight unmanned aerial vehicle (UAV) autonomous missions such as formation flight (FF) and aerial refueling (AR) require an active controller that works in conjunction with a precise sensor that is able to identify an in-front aircraft and to estimate its relative position and orientation. Among possible choices vision sensors are of interest because they are passive in nature and do not require the cooperation of the in-front aircraft in any way. In this paper new vision-based estimation and navigation algorithms based on neural networks is developed. The accuracy and robustness of the proposed algorithm have been validated via a detailed modeling and a complete virtual environment based on... 

IN this paper the effect of different channel estimation approaches in OFDMA uplink system which are based on Basis Expansion Model (BEM) and widely used to consider time varying channels are discussed. It has been shown in previous works that modeling error will be reduced by applying oversampled BEM with cost of increasing sensitivity to noise. This problem will be solved by combining oversampled BEM and MMSE channel estimator with cost of increasing computational complexity. In this paper a novel channel estimation approach is represented in which by combining oversampled BEM and low rank MMSE in frequency domain, almost the same performance as the full rank MMSE has been achieved while... 

This paper discusses the time-varying characteristics of the output signals resulted from Linear Time Variant (LTV) systems using level-crossing properties. These systems, used for generating synthetic records based on a target record, contain two identification processes: 1) amplitude modulating function; and 2) time-varying Impulse Response Function (IRF) parameters. To track the IRF parameters efficiently, the zerocrossing and positive minima/negative maxima cumulative curves are usually utilized as the measures of the instantaneous spectral power. Using spectral moments, analytic relations for zero-crossing and positive minima/negative maxima cumulative count are developed with respect... 

This paper introduces an efficient stochastic method to produce fully nonstationary records having multiple peaks in power spectrum. The zero-crossing characteristics of the acceleration, velocity, and displacement time histories of the output signal are used to estimate the model parameters. This procedure is utilized to resimulate 252 non-pulse-like, horizontal near-field records with rupture distance of less than 10 km and strike–slip mechanism. The model parameters are regressed against moment magnitude, rupture distance, hypo-central depth, and shear wave velocity, enabling the scenario-based simulation of the records. The response spectra of the simulated records are compared with... 

Attitude control of a satellite having only two reaction wheels is a challenging issue. To address this problem, previously published researches considered some simplifying assumptions on the satellites such as diagonality of the moment of the inertia matrix. On the other hand, in some works, the total angular momentum of the satellite is assumed to be zero. In this paper, a linear time-variant model predictive control (LTV MPC) is designed to control a satellite with two reaction wheels. This control method can be applied to a satellite with a non-diagonal inertial matrix in the presence of external torques, to rotate the satellite toward the desired directions in the space and orbit. The...