Sharif Digital Repository

Magnetic nanoparticles of CuFe2O4 were applied as catalyst system for one-pot thiophosphate synthesis via the reaction of aryl sulfonyl chlorides with H-phosphonates under conventional heating conditions. This is an extremely efficient and green method for thiophosphate synthesis under base- and solvent-free conditions. Various thiophosphates were obtained in good to excellent yields under the optimized reaction conditions in a short time. The catalyst can be easily recycled from the reaction by an external magnetic field and reused for the next run. In this study, TD-DFT B3LYP/6-31 + G(d) calculations are in good accord with the experimental results. A comparison between experimental and... 

Electrical properties and electronic structure of Bi1-xCa xFe1-yMnyO3-δ grown by pulsed-laser deposition on BaTiO3/SiO2/Si substrate were investigated. Results showed that Ca has drastic effect on symmetry of crystal and electrical poperties of BiFeO3. On the other hand, Mn revealed to have more radical effect on optical properties and energy gap of the compound. XPS results represented that although Ca tend to decrease Fe valence state, Mn tends to stabilize it at 3+ (at least in this concentrations). UV-visible study yielded bandgap of 2.51-2.81 eV (at 300 K) for different concentrations of Ca and Mn. UV-visible spectra also revealed sub-bandgap defect transitions at 2.2 and 2.4 eV.... 

A readout box prototype for the CMS Hadron Forward calorimeter upgrade was built and tested in the CERN H2 beamline. The prototype was designed to enable simultaneous tests of different readout options for the four anode upgrade PMTs, new front-end electronics design and new cabling. The response of the PMTs with different readout options was uniform and the background response was minimal. Multi-channel readout options further enhanced the background elimination. Passing all the electronic, mechanical and physics tests, the readout box proved to be capable of providing the forward hadron calorimeter operational requirements in the upgrade era  

This study describes the synthesis of TiO2/WO3 composite systems with a varying concentration of WO3 by a glucose-template assisted method and demonstrates their round-the-clock photoactivity performance towards the degradation of methanol (MeOH) under illumination and dark conditions. XRD results indicated a biphasic anatase-rutile nature of TiO2, with tunable concentrations with respect to the WO3 loading. WO3 incorporation extended the light absorption of the system towards visible light, increasing the observed photoactivity. The obtained results were further validated using photo-electrochemical investigations such as photocurrent measurements and the impedance response of the systems.... 

The interaction of [60]fullerene with a newly synthesized series of 17-to 21-membered macrocyclic ligands containing an O2N3-donor set has been investigated. The formation constants (K) arising from their complexation with [60]fullerene macrocycles, having various ring size, were measured in CHCl3 media by UV-visible spectroscopy applying Benesi-Hildebrand (BH) equation and their stoichiometries were also determined by the Job method. The best K value was measured for 20-membered ring macrocycle in which a 1:1 complexation stoichiometry with [60]fullerene was dominant. Furthermore, 1H NMR spectroscopy data reveled that the macrocylic ligand coordinates [60]fullerene via the nitrogen-donor... 

The microemulsion method was successfully used to prepare a series of TiO2, Fe oxide and SiO2 doped TiO2 nanoparticles at Fe/Ti atomic ratio of 10% and Si/Ti atomic ratio of 15%. The molar ratio of water to surfactant (W0) was 2. The samples were calcinated at 350°C. The structural features of TiO2, Fe oxide and SiO 2-TiO2 were investigated by XRD, UV-Visible spectroscopy, SEM and TEM. XRD data verified the formation of typical characteristic anatase form in all the prepared Fe and SiO2-doped TiO2 samples. In comparison with the pure TiO2, Fe oxide and SiO 2-TiO2 samples were relatively large in particle size, indicating that doping with Fe oxide and SiO2 can help in increasing the particle... 

In this study, titanium dioxide (TiO2) nanotube array (TNA) films are fabricated via anodization of titanium (Ti) sheet. After annealing, the films consisted of well ordered, vertically oriented TNAs of 125±6nm diameter, 38±3nm wall thickness, and 2.9±0.3μm in length. Cadmium sulfide (CdS) nanoparticles are deposited on the synthesized TNAs by sequential-chemical bath deposition (S-CBD) method with different immersion cycle (n) to produce heterogeneous TNA/CdS-n (n=10, 20 and 30) nanostructures. UV-visible absorption spectra of the samples revealed that the absorption edge of CdS modified TNAs was shifted to a higher wavelength with respect to the pure TNAs indicating band gap reduction of... 

Branched hierarchical zinc oxide nanowires (BH-ZnO NWs) were fabricated successfully by a facile and rapid synthesis using two-step growth process. Initially, ZnO NWs have been prepared by anodizing zinc foil at room temperature and followed by annealing treatment. Then, the BH- ZnO NWs were grown on the ZnO NWs by a solution based method at very low temperature (31 oC). The BH- ZnO NWs with different aspect ratio were obtained by varying reaction time (0.5, 2, 5, 10 h). Photocatalytic activity of the samples was studied under both UV and visible light. The results indicated that the optimized BH-ZnO NWs (5 h) as a photocatalyst exhibited the highest photoactivity with about 3 times higher... 

In this research, we have focused on the formation of Ag nanoparticles dispersed in SiO2 matrix using sol-gel method. The influences of the metal concentration on the size variation of Ag nanoparticles and the size effect on the surface plasmon absorption have been studied. Sol-gel silica thin films containing Ag particles were synthesized by dip-coating on soda-lime glasses. The molar ratio of Ag / Si was chosen from 0.2% to 8%. All films were dried in air at 100 °C for 1 h. Using X-ray photoelectron spectroscopy, the Ag / Si ratios in the prepared films have been measured. In addition, it was shown that the prepared matrix was a stoichiometric composition as SiO2, and the synthesized... 

Silica films containing various concentrations of Ag nanoparticles were deposited on glass slides using a sol-gel process and then heat-treated in air at different temperatures. The films were analysed by using UV-visible spectrophotometry, atomic force microscopy (AFM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray photoelectron spectroscopy (XPS) for their optical, surface morphological as well as structural, and chemical properties. After heat-treatment, the optical absorption peaks of Ag nanoparticles show a blueshift and an intensity reduction due to particle size reduction and AgOx nanoparticle formation, respectively. The particle size reduction... 

Titania thin film system containing noble metallic nanoparticles such as Au, Ag, and Cu have been prepared by utilizing radio frequency reactive magnetron cosputtering method. The structural and morphological properties of the thin films were characterized by X-ray diffraction (XRD) and atomic force microscopy (AFM). Surface chemical composition of the films was determined by X-ray photoelectron spectroscopy (XPS). Optical properties of the TiO 2 annealed films containing Au, Ag, and Cu metallic nanoparticles were investigated by UV-visible spectrophotometry showing surface plasmon resonance of the metals. The photocatalytic activity of all synthesized samples annealed at 600 °C in an Ar +... 

A new photocatalyst (Ag-S/PEG/TiO2) was synthesized by adding polyethylene glycol (PEG) to an efficient Ag-S/TiO2 photocatalyst, to obtain a photocatalyst that is highly active under visible light. In addition to Ag-S/PEG/TiO2, Ag-S/TiO2 and pure TiO2 were prepared to compare their properties and activities. Specifically, the morphologies and microstructures of the nanophotocatalysts were characterized by means of powder X-ray diffraction (XRD), N2 adsorption-desorption measurements, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) microanalysis, transmission electron microscopy (TEM), UV-visible diffuse reflectance spectroscopy (DRS), photoluminescence (PL) spectroscopy,... 

CdS/TiO2/graphene (CTG) nanocomposite thin films were synthesized by a facile production route. The TiO2/graphene (TG) nanocomposite was initially fabricated by sol-gel method in such a way that TiO2 nanoparticles loaded on graphene oxide (GO) sheet via photocatalytic process. Then, CdS nanoparticles were deposited on the TG thin film by successive ion layer adsorption and reaction process (SILAR) approach. Based on atomic force microscopy (AFM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses, the TG thin film possessed a larger surface area as compared with the pure TiO2 thin film due to presence of graphene sheet. UV/visible spectroscopy exhibited... 

The interaction of [60]fullerene with a series of 15-19-membered macrocycles containing an O 2N 2-donor set has been investigated by UV-visible spectroscopy. The formation constants arising from the complexation of [60]fullerene with these azacrown macrocycles, having various ring size, were determined in CHCl 3 media applying Benesi-Hildebrand equation. The stoichiometry has been found by the Job method in each case. The thermodynamic parameters, for example, formation enthalpies (δH o) and entropies (δS o), for these complexation were also determined. Experimentally, it was found that macroring size of the azacrown has a prominent effect on azacrown complexation with [60]fullerene in terms... 

The electronic conductor-insulator transition in Ca-doped BiFeO 3 films grown by pulsed-laser deposition technique has been investigated. Nature of the transition is resolved to be Mott type through the control of band-filling. Calcium resolved to have colossal effect on enhancing the electrical conductivity of BiFeO 3, but it did not affect band gap of the mother phase perceptibly. UV-visible study yielded band gap of 2.72-2.81 eV (at 300 K) for different concentrations of calcium. Both UV-visible and photoluminescence spectra revealed sub-band gap transitions at 2.17 and 2.38 eV, of which the latter might be ascribed to the oxygen vacancies  

Adsorption of human serum proteins (Albumin and total protein) onto high purity synthesis nano-hydroxyapatite (HA), Ca 10(PO 4) 6(OH) 2, has been studied in a wide temperature range by UV-visible spectrophotometer. Adsorption isotherm is basically important to describe how solutes interact with adsorbent, andiscriticalinoptimizing the use of adsorbent. Inthe present study, the experimental results werefitted tothe Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (DR) models to obtain the characteristic parameters of each model and square of the correlation coefficients (R 2). According to the results, the DR isotherm model had the best agreement with the experimental data. The effect of... 

Two types of unfunctionalized and functionalized multi-wall carbon nanotubes (MWCNTs) were prepared to be applied in fabrication of MWCNT-ZnO nanocomposite thin films with various MWCNT contents. X-ray photoelectron spectroscopy indicated formation of functional groups on surface of the functionalized MWCNTs in the MWCNT-ZnO nanocomposite. Formation of the effective carbonaceous bonds between the ZnO and the MWCNTs was also investigated through photoinactivation of Escherichia coli bacteria on surface of the both unfunctionalized and functionalized MWCNT-ZnO nanocomposites. The functionalized MWCNT-ZnO nanocomposites showed significantly stronger photoinactivation of the bacteria than the... 

We have synthesized CdS NCs (NCs) by a thermochemical approach. CdSO 4 and Na2S2O3 were used as the precursors and thioglycolic acid (TGA) was used as capping agent molecule. The structure and optical property of the NCs were characterized by means of XRD, TEM, UV-visible optical spectroscopy and photoluminescence (PL). XRD and TEM analyses demonstrated hexagonal phase CdS NCs with an average size of around 2 nm. Synthesized NCs exhibited a band gap of about 3.21 eV and showed a broad band emission from 400 to 750 nm centered at 503 nm. This broad band emission is related to surface states of CdS and our results showed that the emission peak can be attributed to the interstitial sulfur. The... 

A soft template route is reported for the fabrication of polyaniline nanospheres via the oxidative polymerization of aniline in the presence of β-naphthalenesulfonic acid (β-NSA) as both surfactqant and dopant, and ammonium persulfate as oxidant at 2-5°C. Control over the morphology and size of the nanoparticles was achieved by changing the reaction medium via addition of an organic cosolvent (i.e. ethanol or ethylene glycol) and by controlling the concentrations of aniline and β-NSA and the molar ratio of β-NSA to aniline. By this means the size of the β-NSA-aniline micelles and the way that aniline monomer interacts with the micelles were controlled. In fact the lower dielectric constant... 

Two types of nanosized photocatalyst, TiO 2 P-25 and ap/Ag/AgBr/TiO 2, were used for decolorization of Acid Blue 92 (AB92) in dark, visible light (V-L), and UV media. Under UV and V-L, the effect of three possible photodegradation processes of AB92 including photocatalytic degradation, self-photosensitization, and direct photolysis were studied. Results showed that in UV/photocatalysts, photocatalytic degradation is the major process for photodecolorization. However, in the presence of TiO 2, self-photosensitization has the major role under V-L. Because of the presence of AgBr as photoactive center in ap/Ag/AgBr/TiO 2, the main process is the photocatalytic degradation in V-L. By using...