Sharif Digital Repository

Objectives: The aim of this study was to assess and compare the crystalline structures of both powder and bulk human dental enamel by X-ray diffraction analysis (XRD). Methods: The buccal surfaces of 60 selected noncarious third molars were divided into two groups of powdered and bulk enamel specimens. To prepare enamel powders, the enamel tissues were ground and powdered manually using a mortar and pestle. For bulk samples, the enamel slabs were sectioned using a low-speed diamond saw. The crystalline structures of samples were analyzed by XRD, and the obtained data were analyzed. The values of the lattice parameters were obtained using the equation of hexagonal crystalline structures. The... 

We present a Vector Dark Matter (VDM) model that explains the 3.5 keV line recently observed in the XMM-Newton observatory data from galaxy clusters. In this model, dark matter is composed of two vector bosons, V and V', which couple to the photon through an effective generalized Chern-Simons coupling, gV. V' is slightly heavier than V with a mass splitting mV' - mV 3.5 keV. The decay of V' to V and a photon gives rise to the 3.5 keV line. The production of V and V' takes place in the early universe within the freeze-in framework through the effective gV coupling when mV' < T < Λ, Λ being the cut-off above which the effective gV coupling is not valid. We introduce a high energy model that... 

The main aim of this paper was to study the effect of a new tripodal chelating agent on La1-x Sr x Co1-y Fe y O3-δ perovskite prepared by the complexation method. For this purpose, a phenolic derivative of glycine (L) was synthesized applying the Mannich reaction and characterized by NMR and IR spectroscopies as well as by elemental analysis. To evaluate the complexation capability of L, its formation constants with the perovskite cations were measured. Comparison of these results with those reported for the complexaion with glycine, introduced L as a good candidate for the complexation with Fe(III) and La(III) cations. Furthermore, the powder XRD observations confirmed an improvement in the... 

The non-symmetrical tetradentate Schiff-base H2L have been obtained using the half-unit N-(1-hydroxy-2-acetonaphthone)-1-amino-2- phenyleneimine (HL1) with 2-hydroxyl-1-naphthaldehyde. ML complexes(M = Ni(1), Cu(2), Co(3) and Zn(4)) were prepared and characterized by atomic absorption, IR, UV, 1H NMR spectroscopy, and a single crystal X-ray structure. Crystal data for (1) are triclinic space group P-1, a = 7.9784 (3) A, b = 10.2417 (4) A, c = 13.4090 (5) A, α = 103.8480 (10)°, β = 97.0540 (10)°, γ = 92.2400 (10)° and z = 2. Crystal data for (2): Triclinic space group P-1, a = 7.9991 (6) A, b = 10.0520 (7) A, c = 13.6974 (10) A, α = 103.6500 (10)°, β = 95.9650 (10)°, γ = 90.3160 (10)° and z =... 

In this paper, a practical simulation method for optimizing of x-ray reflection of nano-multilayer mirrors in three different edge energies: Cr-Kα, Co-Kα, and Ti-Kα is discussed in order to obtain the most reflection based on quarter-wave thickness method (QW). In this method, the reflected x-ray will have a constructive interference, and a peak, called Brag peak, will appear in reflection curve when the tickness of the layer is an odd multiple of the quarter-wave thickness. The quarter-wave thickness is dependent to on the angle and energy of the entrance photon beam. In the mentioned edge energies, for different nano-multilayer mirrors, and for incident angle ranges from 0.5 to 8 degrees,... 

We have explored the suitability of an O,N,N–donor Schiff base (H2SB) for obtaining dinuclear complexes with heavy metal ions such as Cu2+, Zn2+, Ni2+, and Co2+ (borderline acids) as well as Pd2+ and Cd2+ (soft acids). Spectroscopic studies demonstrated that the complexation of H2SB and Cu2+, Zn2+, Ni2+, Co2+, Pd2+, and Cd2+ occurred at a 1:1 stoichiometry. We have found two square planar centers with Pd-N-Pd angles of 93.08(11)◦ and a Pd–Pd distance of 3.0102(4) Å in Pd2(SB)2·Me2CO. This Pd–Pd distance is 30% shorter than the sum of the van der Waals radii, which is in accordance with a strong palladophilic interaction. Fluorescence studies on H2SB-M2+ interaction showed that H2SB can... 

Single crystals of Ba 1-x K x BiO 3 compound for different values of x (0 x 0.6) from insulator to superconducting region have been grown by electrochemical method. The crystals have been characterized by powder X-ray diffraction and Laue X-ray to determine the crystal structure, phases and potassium concentration. The phonon dispersion of the crystals in (100) direction has been investigated by high-resolution inelastic X-ray scattering. The phonon dispersion for low energy region is almost similar for all crystals measured in this study, while the higher energy modes shift to higher energy by increasing the potassium concentration. Anomalous softening of highest energy phonon has been... 

Set of experiments has been developed to study existing runaway electrons in "Damavand" tokamak plasma upon characteristics of hard x-ray emissions produced by collision of the runaway electrons with the plasma particles and limiters. As a first step, spatial distribution of hard x-ray emissions on the equatorial plane of the torus was considered. Obtained spectra of hard x-ray emissions for different alignments of shielded detector indicate isotropic emissivity in the equatorial plane. This is in agreement with wide angle cone of bremsstrahlung radiations, deduced from the mean value of energy of the runaway electrons. The mean energy was calculated from the slope of the energy spectrum of... 

Cuprous oxide powder was added to WO3 sol as a catalyst and the composite sol was deposited on alumina substrates by spin coating process and annealing at 500 °C for 1 hour. Sensing properties of the pure and doped tungsten oxide samples to H2S gas were analyzed. WO 3-Cu2O (1%) samples showed good sensitivity towards 250 ppb of the gas at 100 °C and 1 ppm at room temperature (25 °C). Crystal structure, morphology and chemical composition of the sample were studied by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDAX) analyses and X-ray photoelectron spectroscopy (XPS). Based on these data, possible reaction mechanisms of hydrogen sulfide over WO... 

Plasma focus is a copious source of electrons, ions, neutrons, and X-rays. SUT-PF is a 7 kJ Mather type plasma focus device. In order to study soft X-rays emitted by this device a bent crystal spectrometer has been designed and constructed based on Johann method. Before recording spectral lines, using a photodiode detector and a pinhole camera, optimum parameters for maximum emission of soft X-rays have been studied and registered. Results show that ionized Argon atomic lines mostly have wavelengths between 3 and 4 Å. Among them 1s2–1s2p transition with a wavelength of 3.943 Å represents the most intense line  

This work deals with the preparation of epoxy-clay nanocomposites. The results show that the mechanical properties of nanocomposites depend on their compatibility, the epoxy resin used and the purity of the nanoclay. The used bentonite was purified and the effects of the organoclay synthesis and various additives on its characteristics were evaluated. X-ray Diffraction (XRD), X-ray Fluorescence (XRF) and Scanning Electron Microscopy (SEM) were used to analyze the microstructure and the phase composition of the nanoclay. The XRD results revealed that when the modifier addition was increased from 10wt.% to 40 wt.%, the interlayer spacing of the nanoclay increased from 12.43 Å being... 

Synthesis and characterization of metal dithiocarbamate complexes of N 1 ,N 3 -dicinnamylpropane-1,3-diamine, N 1 ,N 4 -dicinnamylbutane-1,4-diamine and N 1 ,N 6 -dicinnamylhexane-1,6-diamine are reported. The ligands are prepared using cinnamaldehyde and primary diamines to provide the corresponding diimines, followed by reduction with NaBH 4 to afford the corresponding secondary diamines. Diamines react with carbon disulfide in basic medium to furnish the corresponding bis(dithiocarbamate) salts, which underwent complexation with metals. The prepared complexes were characterized by IR, 1 H and 13 C NMR, TGA and elemental analyses. Although the dinuclear metal dithiocarbamate macrocyclic... 

Attempts have been made to quantify the amount of contaminants absorbed by liquid metal from commercial ZrO2-, Al2O3-, and SiC-base crucibles used for vacuum melting of Ni-45 wt pet Ti alloy. The molten alloy was held under vacuum for 90 minutes at 1450°C to become homogenized. Reactions between the liquid metal and the crucible were investigated by visual observation, chemical analysis, scanning electron microscopy (SEM) image processing, and X-ray mapping. The relative degree of contamination declined in the following sequence: commercially pure SiC > SiC-5 wt pct Al2O3-5 wt pet SiO2] > slurry cast alumina > recrystallized alumina > zircon type A > oxygen deficient high-purity zirconia.... 

The relativistic Weibel instability and temperature anisotropy can generate electron bunches of attosecond duration which makes it an attractive method for the generation and amplification of tunable ultrashort pulses. In this paper, the effect of the relativistic Weibel instability and temperature anisotropy on generating attosecond electron bunches is investigated. Calculations show that with the reduction relativistic parameter, γ, by a factor of 2, increasing 14.6% of the relativistic Weibel instability leads to about 62% reduction of the nanobunching gain saturation time and the density perturbation generated by the temperature anisotropy and the relativistic Weibel instability. The... 

The synthesis and structures of two new octadentate, Schiff-base calixpyrrole macrocycles are presented in which modifications at the meso-substituents (L1) or the aryl spacer between the two pyrrole-imine donor compartments (L2) are introduced. The outcomes of these changes are highlighted in the structures of binuclear Pacman complexes of these macrocycles, [M2(L1)] and [M2(L 2)]. Both palladium and cobalt complexes of the fluorenylmeso- substituted macrocycle H4L1 adopt rigid, but laterally twisted geometries with enclosed bimetallic microenvironments; a consequence of this spatial constraint is an exo-exo-bonding mode of pyridine in the dicobalt complex [Co2(py)2(L1)]. In contrast, the... 

The compound, lead hydroxide Pb6O4(OH)4, was prepared by a method used for the first time in the authors laboratory. The compound was identified by XRD and it's purity was determined by analytical methods (100%). The thermal characteristics of this compound were investigated by using a thermogravimetry (TGA). This compound was found to be stable at room temperature and at 160°C will decompose completely to produce lead (II) oxide. © Sharif University of Technology, April 2007  

Because of corrosion resistance and antibacterial effects, shape memory Ni-Ti-Ag alloy can be considered for different biomedical applications. Mechanical alloying is used to produce nanostructured Ni-Ti-Ag alloy from elemental powders. X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) are used to characterize the product. Results show that after 1h milling, homogenous distribution of the elements occurs; while no intermetallic compounds is observed. After 3h milling, titanium dissolves in nickel to form amorphous and nanostructured solid phases. Peaks of B2 phase appear in the XRD pattern after the 3h milling of the powder mixture. Sintering of the 3h-milled...