Loading...

Influence of Mold Preheating and Silicon Content on Microstructure and Casting Properties of Ductile Iron in Permanent Mold

Jafar, K. A ; Sharif University of Technology | 2011

488 Viewed
  1. Type of Document: Article
  2. DOI: 10.1016/S1006-706X(11)60034-4
  3. Publisher: 2011
  4. Abstract:
  5. The effects of the mold preheating and the silicon content of ductile iron on the percentage of carbides, graphite nodule counts and shrinkage volume were investigated. The results showed that the percentage of carbides and the shrinkage volume decreased when the mold preheating increased. The ductile iron with the carbon equivalent of 4.45% and the silicon content of 2.5% without any porosity defects was achieved when the mold preheating was 450 °C. Increasing the silicon content in the range of 2.1%-3.3% led to the increase in graphite nodule count and graphite size and the decrease in percentage of carbides. It is due to the increase in induced expansion pressure during the graphite formation with the increasing of silicon content. The suitable condition for casting a sound product of ductile iron without the riser at the mold preheating temperature of 300 °C is the silicon content of 3.3% and carbon equivalent of 4.7%
  6. Keywords:
  7. Carbide ; Ductile iron ; Permanent mold ; Preheating temperature ; Shrinkage volume ; Silicon content
  8. Source: Journal of Iron and Steel Research International ; Volume 18, Issue 3 , 2011 , Pages 34-39 ; 1006706X (ISSN)
  9. URL: http://www.sciencedirect.com/science/article/pii/S1006706X11600344