Loading...

Microstructural characterization and dry sliding wear behavior of spark plasma sintered Cu-YSZ composites

Mirazimi, J ; Sharif University of Technology | 2016

1032 Viewed
  1. Type of Document: Article
  2. DOI: 10.1016/S1003-6326(16)64289-9
  3. Publisher: Nonferrous Metals Society of China , 2016
  4. Abstract:
  5. In the present study, yttria stabilized zirconia (YSZ) reinforced Cu matrix composite specimens were produced by spark plasma sintering (SPS). For comparison, pure Cu specimen was also produced in the same conditions. The effect of particles content on microstructure, relative density, electrical conductivity, and Vickers hardness was evaluated. The pin-on-disk test was also performed to determine dry sliding wear behavior of specimens under different wear conditions. After sliding wear tests, the worn surfaces were examined by field emission scanning electron microscopy (FE-SEM). Microstructural study showed satisfactory distribution of reinforcement particles in copper matrix. The relative density up to 95% was obtained for all specimens. By increasing YSZ content from 0 to 5% (volume fraction), the electrical conductivity of specimens decreased from 99.2%IACS to 65%IACS, correspondingly. The hardness of Cu-5%YSZ composite specimen was two times greater than that of pure copper. The volume loss and wear rate of pure Cu specimen were 1.48 mm3 and 1.5×10−3 mm3/m under 50 N applied load and 1000 m sliding distance. However, for composite containing 5% YSZ particles, these values dropped to 0.97 mm3 and 0.9×10−3 mm3/m, respectively. Moreover, the friction coefficient of specimens was changed from 0.6 to 0.4. The worn surface and debris observation indicate local plastic deformation and delamination as dominant wear mechanisms for pure copper, while oxidation and ploughing for composite specimen. Accordingly, it can be concluded that the Cu-YSZ composite could be a good candidate for the electrical contact applications in relays, contactors, switches and circuit breakers requiring good electrical and thermal conductivity and capability to resist wearing. © 2016 The Nonferrous Metals Society of China
  6. Keywords:
  7. Copper ; Electric circuit breakers ; Electric conductivity ; Enamels ; Field emission microscopes ; Friction ; Metallic matrix composites ; Microstructure ; Reinforcement ; Scanning electron microscopy ; Sintering ; Spark plasma sintering ; Vickers hardness ; Wear of materials ; Zirconia ; Copper matrix composite ; Electrical conductivity ; Field emission scanning electron microscopy ; Local plastic deformation ; Micro-structural characterization ; Reinforcement particles ; Sliding wear ; Yttria-stabilized zirconias (YSZ) ; Yttria stabilized zirconia
  8. Source: Transactions of Nonferrous Metals Society of China (English Edition) ; Volume 26, Issue 7 , 2016 , Pages 1745-1754 ; 10036326 (ISSN)
  9. URL: http://www.sciencedirect.com/science/article/pii/S1003632616642899