Loading...
Search for:
alkaline-solutions
0.006 seconds
Total 29 records
The Poisoning Effect of Sulfur-Containing Compounds on the Elelctro-Oxidation of Methanol and Ethanol on Ni and Cu Electrodes
, M.Sc. Thesis Sharif University of Technology ; Gobal, Fereydon (Supervisor)
Abstract
In this study a systematic effort was made to investigate the poisoning effect of sulfur-containing materials on the electro- oxidation of methanol and ethanol on Ni and Cu electrodes in alkaline solutions by the methods of cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. Activation energy of methanol electro-oxidation in the absence of Na2S was obtained 30.7 kJ/mol by cyclic voltammetric at different temperatures, and its values increased by increase in Na2S concentrations to 97kJ/mol. Na2S adsorption isotherms corresponded with Langmuire isotherm, equilibrium constants of adsorption – desorption and adsorption enthalpy (ΔHads= -62kJ/mol) were calculated for...
Experimental Investigation of the Durability of Rammed Earth Materials in Different Environments
, M.Sc. Thesis Sharif University of Technology ; Toufigh, Vahab (Supervisor)
Abstract
Rammed earth structures have attracted the attention of engineers and researchers in recent years due to their economic advantages, sustainable development, and environmental sustainability. One of the main concerns for public opinion for acceptance of Rammed Earth as a reliable construction material is their durability. Previous studies have investigated the durability of rammed earth materials by conducting wet and dry cycle test, accelerated erosion test, and rain simulation in the laboratory environment. This research studied the durability of cement stabilized rammed earth (CSRE) for one year under the aggressive environments. Three cement contents were considered for preparing the CSRE...
Mechanical Characteristics of Activated Slag Concrete with Alkaline Solution
, M.Sc. Thesis Sharif University of Technology ; Kazemi, Mohammad Taghi (Supervisor)
Abstract
Nowadays, due to the increasing importance of environmental issues, cement replacement has been considered by many researchers .Determination of behavioral characteristics and fracture of materials such as fracture hardness and energy is used to describe the formation and progress of cracks in new building materials. On the other hand, one of the concrete that can be replaced ordinary concrete is slag concrete. Slag concrete is in the category of Geopolymer Concrete. This concrete is produced by activation of puzzulanic material by alkaline solution.There have not been many studies on the failure of slag concrete. Therefore, in this study, the mechanical properties of slag concrete were...
Experimental Study of Oxygen Reduction Reaction (ORR) on Cu-alloys, Electrocatalysts in Alkaline Solution and Theoretical Investigation of Oxygen Adsorption on Cu-alloys Nano-clusters
, Ph.D. Dissertation Sharif University of Technology ; Gobal, Fereydoon (Supervisor)
Abstract
In this study, electrochemical oxygen reduction reaction (ORR) was studied on Cu, Pd, Rh, Pd-Cu and Rh-Cu alloys in alkaline solution. Pd-Cu and Rh-Cu alloys were prepared by electrochemical methods. On copper electrode it is found that direct oxygen reduction is accompanied by the electrochemical reductions of copper oxides. Also, mechanism and kinetics of reaction change as the amount of copper oxides increase on the surface. For electrodeposited alloys, it is indicated that the reactivity of Pd-Cu and Rh-Cu alloys toward oxygen reduction is higher than pure Pd and pure Rh. The maximum reactivity among Pd-Cu alloys is related to the sample with 24.5% copper content while the maximum...
Environmental effects on the bond at the interface between FRP and wood
, Article European Journal of Wood and Wood Products ; Volume 76, Issue 1 , 2018 , Pages 163-174 ; 00183768 (ISSN) ; Toufigh, V ; Mofid, M ; Sharif University of Technology
Springer Verlag
2018
Abstract
The advantages of fiber reinforced polymer (FRP), such as high specific strength, resistance against corrosion and formability, have made it a more acceptable alternative to conventional materials regarding repairing and retrofitting of structures. Although investigations in recent years have proved the concern of civil engineers about the environmental effects on the bond between FRP and concrete or masonry (especially moisture and temperature), only few researches have been reported on FRP-wood interfaces. This research investigated the effect of five different environments on the bond at the interface between FRP and wood. A series of pull-out tests were performed on 375 wood specimens...
Simulation of SO2 absorption in a venturi scrubber
, Article Chemical Engineering Communications ; Volume 197, Issue 7 , Feb , 2010 , Pages 934-952 ; 00986445 (ISSN) ; Mohebbi, A ; Taheri, A ; Sharif University of Technology
2010
Abstract
In this study, a three-dimensional mathematical model, based on a nonuniform droplet concentration distribution, has been developed to simulate gas absorption in a venturi scrubber. The mass transfer process was illustrated by assuming the liquid phase as a combination of droplets and film. The flow, just as the annular two-phase flow, includes a flow of liquid film layer on the walls and a flow of gas and liquid drops in the core. Peclet number was determined using experimental data reported by Viswanathan et al. (1984) for distribution of droplets across the cross section of the scrubber. The mathematical model for gas absorption was justified by comparing the theoretical predictions with...
Waste ceramic powder-based geopolymer mortars: effect of curing temperature and alkaline solution-to-binder ratio
, Article Construction and Building Materials ; Volume 227 , 2019 ; 09500618 (ISSN) ; Musaeei, H. R ; Mirlohi, F ; Narimani zamanabadi, S ; Ameri, F ; Bahrami, N ; Sharif University of Technology
Elsevier Ltd
2019
Abstract
In this study, the optimum curing temperature and alkaline solution-to-binder (S:B) ratio of geopolymer mortars based on waste ceramic powder (WCP) were investigated. For this purpose, mixes with S:B ratios of 0.4–0.7 were prepared and cured at 60, 75, 90, and 105 °C. The density, compressive and flexural strengths were measured at 3, 7, 14, and 28 days. Higher S:B ratios enhanced the flow of the fresh mortar. The optimum mortar was obtained for S:B ratio of 0.6 and curing temperature of 90 °C. The SEM analysis revealed that the optimal mix had a dense matrix with minimum pores. © 2019 Elsevier Ltd
Electrochemical investigation of electrodeposited Fe-Pd alloy thin films
, Article Electrochimica Acta ; Volume 56, Issue 1 , 2010 , Pages 483-490 ; 00134686 (ISSN) ; Ghorbani, M ; Dolati, A ; Sharif University of Technology
Abstract
In the present study, the electrodeposition of Fe, Pd and Fe-Pd alloys, in alkaline solutions, has been investigated. Using ammonium hydroxide and trisodium citrate as the complexing agents, it has been shown that the co-deposition of Fe and Pd is achieved due to diminishing the difference between the reduction potentials of these two metals. Cyclic voltammetry results clearly show that the electrodeposition processes are diffusion-controlled and the diffusion coefficients of Fe2+ and Pd2+ are 1.11 × 10-6 and 2.19 × 10-5 cm2 s -1, respectively. The step potential experiments reveal that nucleation mechanism is instantaneous with a typical three-dimensional (3D) growth. At low overpotentials,...
Enhanced decolorization of Reactive Blue 19 dye from synthetic textile wastewater through UV photolysis in alkaline conditions
, Article Environmental Engineering and Management Journal ; Volume 7, Issue 2 , 2008 , Pages 119-123 ; 15829596 (ISSN) ; Ghaneian, M ; Hashemian, S. J ; Mosavi, G ; Hajizadeh, E ; Sharif University of Technology
Gh. Asachi Technical University of Iasi
2008
Abstract
Laboratory scale experiments were conducted in order to investigate the photolysis of Reactive Blue 19 (RB 19) dye using UV as the irradiation source in alkaline solution. The effects of operating parameters such as, pH, initial dye concentration, UV dosage, hydrogen peroxide and oxygen have been evaluated. The results indicate that the UV photolysis process in alkaline solution is ideal for decolorizing of RB 19 and it can be taken as a starting step to establish the economical feasibility of the method for the decolorization of wastewater from textile industries
Fabrication of durable superhydrophobic surfaces using PDMS and beeswax for drag reduction of internal turbulent flow
, Article Applied Surface Science ; Volume 513 , 2020 ; Liravi, M ; Moosavi, A ; Nouri Borujerdi, A ; Najafkhani, H ; Sharif University of Technology
Elsevier B.V
2020
Abstract
Nowadays, one of the biggest concerns in the world is increasing the CO2 emissions and global warming due to the over-consumption of fossil fuels. In addition, under the intense market competition, the demand for more efficient systems with higher performance and lower energy consumption has escalated. Since the drag force contributes to a considerable percentage of the energy loss and reducing the performance, a large number of studies have been conducted to improve the surface characteristics and, subsequently, declining the drag force. Making the surface superhydrophobic is one of the most effective ways for this purpose. In this work, two different superhydrophobic surfaces using SiO2...
A preliminary study of the electro-oxidation of l-ascorbic acid on polycrystalline silver in alkaline solution
, Article Journal of Power Sources ; Volume 195, Issue 1 , 2010 , Pages 165-169 ; 03787753 (ISSN) ; Gobal, F ; Sharif University of Technology
2010
Abstract
Electrochemical oxidation of l-ascorbic acid on polycrystalline silver in alkaline aqueous solutions is studied by cyclic voltammetry (CV), chronoamperometry (CA) and impedance spectroscopy (IS). The anodic electro-oxidation starts at -500 mV versus SCE and shows continued anodic oxidation in the cathodic half cycle in the CV regime signifying slowly oxidizing adsorbates. Diffusion coefficient of ascorbate ion measured under both voltammetric regimes is around 1.4 × 10-5 cm2 s-1. Impedance spectroscopy measures the capacitances associated with double layer and adsorption around 50 μF cm-2 and 4 mF cm-2 as well as the adsorption and decomposition resistances (rates). © 2009 Elsevier B.V. All...
Electrodeposition and electrocatalytic properties of Pt/Ni-Co nanowires for non-enzymatic glucose detection
, Article Journal of Alloys and Compounds ; Volume 554 , 2013 , Pages 169-176 ; 09258388 (ISSN) ; Mahshid, S ; Dolati, A ; Ghorbani, M ; Yang, L ; Luo, S ; Cai, Q ; Sharif University of Technology
2013
Abstract
A nanowire arrays system consisting of an ordered configuration of Pt, Ni and Co was constructed in single-bath solution through pulse electrodeposition. This structure was evaluated as a potential amperometric non-enzymatic sensor to detect glucose in alkaline solution. We observed a strong and fast amperometric response at low applied potential of 0.4 V vs. SCE over linear ranges of 0-0.2 mM and 0.2-8 mM glucose with sensitivities of 1125 and 333 μA mM-1 cm-2, respectively. We also observed a low detection limit for glucose of 1 μM. Correlation of the electronic and geometric modifications with the electrochemical performance characteristics enhanced catalytic activity of the electrode by...
Template-based electrodeposition of Pt/Ni nanowires and its catalytic activity towards glucose oxidation
, Article Electrochimica Acta ; Volume 58, Issue 1 , 2011 , Pages 551-555 ; 00134686 (ISSN) ; Mahshid, S ; Dolati, A ; Ghorbani, M ; Yang, L ; Luo, S ; Cai, Q ; Sharif University of Technology
2011
Abstract
An electro-catalysis non-enzymatic electrode is proposed based on alloyed Pt/Ni nanowire arrays (NWAs) for the detection of glucose. The Pt/Ni NWAs were prepared by pulse electrodeposition of Pt and Ni within a nano-pore polycarbonate (PC) membrane followed by a chemical etching of the membrane. The electrode structure is characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The resulting Pt/Ni NWAs electrode shows high electrocatalytic activities towards the oxidation of glucose in alkaline solution. Consequently, a sensitive amperometric detection of glucose is achieved under 0.45 V vs. SCE with a low detection limit of 1.5 μM within a wide linear...
Optimization of some experimental parameters in the electro membrane extraction of chlorophenols from seawater
, Article Journal of Chromatography A ; Volume 1216, Issue 45 , 2009 , Pages 7687-7693 ; 00219673 (ISSN) ; Khalilian, F ; Bagheri, H ; Lee, H. K ; Sharif University of Technology
2009
Abstract
An electro membrane extraction (EME) methodology was utilized to study the isolation of some environmentally important pollutants, such as chlorophenols, from aquatic media based upon the electrokinetic migration process. The analytes were transported by application of an electrical potential difference over a supported liquid membrane (SLM). A driving force of 10 V was applied to extract the analytes through 1-octanol, used as the SLM, into a strongly alkaline solution. The alkaline acceptor solution was subsequently analyzed by high performance liquid chromatography-ultraviolet (HPLC-UV) detection. The parameters influencing electromigration, including volumes and pH of the donor and...
Comparison of the corrosion resistance of alkaline- and acid-anodized titanium
, Article Materials Performance ; Volume 54, Issue 1 , 2015 , Pages 51-55 ; 00941492 (ISSN) ; Ghahramani, S ; Afshar, A ; Malekinejad, P ; Sharif University of Technology
National Assoc. of Corrosion Engineers International
2015
Abstract
The process of self-color anodizing of titanium is done in acidic and alkaline solutions, and anodic films of different colors are formed. Results of this work show that the corrosion rate of titanium decreased after the application of an anodizing layer
A comparative study of the electrooxidation of C1 to C3 aliphatic alcohols on Ni modified graphite electrode
, Article Science China Chemistry ; Volume 55, Issue 9 , 2012 , Pages 1819-1824 ; 16747291 (ISSN) ; Mirzapoor, A ; Danaee, I ; Shahnazi, S. A. A ; Gobal, F ; Sharif University of Technology
Abstract
Nickel modified graphite electrodes (G/Ni) prepared by galvanostatic deposition were examined for their redox process and electrocatalytic activities towards the oxidation of methanol, ethanol, 1-propanol and 2-propanol in alkaline solutions. The methods of cyclic voltammetry (CV), chronoamperometry (CA) and impedance spectroscopy (EIS) were employed. In CV studies, the electrochemical response, peak current varied in the order of MeOH > EtOH > 1-PrOH > 2-PrOH. Under the CA regime, a higher catalytic rate constant obtained for methanol oxidation was in agreement with CV measurements. Lower charge transfer resistance was obtained for low carbon alcohols oxidation and significantly higher...
A comparative investigation of the electrocatalytic oxidation of methanol on poly-NiTCPP and poly-TCPP/Ni modified glassy carbon electrodes
, Article Journal of Electroanalytical Chemistry ; Volume 663, Issue 1 , December , 2011 , Pages 14-23 ; 15726657 (ISSN) ; Haghighatbin, M. A ; Gobal, F ; Mahjani, M. G ; Rayati, S ; Sharif University of Technology
2011
Abstract
Electro-oxidation of methanol in alkaline solution at a glassy carbon electrode electrochemically modified by a conductive polymeric meso-tetra(4-carboxyphenyl)porphyrinato nickel(II), abbreviated as poly-NiTCPP and also meso-tetra(4-carboxyphenyl)porphyrin with incorporated nickel(II) cations, abbreviated as, poly-TCPP/Ni, were investigated and compared. Both films were prepared by oxidative electro-polymerization of complexes by repetitive cyclic voltammetry (RCV) in 0.1 M NaOH aqueous solution. The electrochemical properties and behaviors and also kinetic values of both films have been characterized and compared using cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical...
Multistep reduction of oxygen on polycrystalline silver in alkaline solution
, Article Cuihua Xuebao/Chinese Journal of Catalysis ; Volume 31, Issue 5 , 2010 , Pages 541-546 ; 02539837 (ISSN) ; Gobal, F ; Mahjani, M. G ; Hosseini Aliabadi, M ; Sharif University of Technology
Abstract
Oxygen reduction on a polycrystalline silver electrode was studied by cyclic voltammetry and electrochemical impedance spectroscopy. The reaction occurred by a two-electron pathway. The steps in the mechanism were observed in the cyclic voltammograms recorded with different scan rates. The intermediates formed in the steps were detected by electrochemical impedance spectroscopy
A low cost and highly active non-noble alloy electrocatalyst for hydrazine oxidation based on nickel ternary alloy at the surface of graphite electrode
, Article Journal of Electroanalytical Chemistry ; Volume 763 , 2016 , Pages 134-140 ; 15726657 (ISSN) ; Rostami, T ; Mahjani, M. G ; Gobal, F ; Sharif University of Technology
Elsevier B.V
2016
Abstract
The electrocatalytic oxidation of hydrazine was studied over Ni, Cu, Co and Ni-based ternary alloy on graphite electrodes in alkaline solution. The catalysts were prepared by cycling the graphite electrode in solutions containing Ni, Cu and Co ions at cathodic potentials. The synergistic effects and the catalytic activity of the modified electrodes were investigated by cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS). It was found that, in the presence of hydrazine, the modified Ni-based ternary alloy electrode (G/NiCuCo) exhibited a good catalytic activity for the oxidation of hydrazine at a reduced overpotential and it has a significant high...
Electrocatalytic oxidation of glucose on Ni and NiCu alloy modified glassy carbon electrode
, Article Journal of Solid State Electrochemistry ; Volume 13, Issue 8 , 2009 , Pages 1171-1179 ; 14328488 (ISSN) ; Forouzandeh, F ; Danaee, I ; Gobal, F ; Mahjani, M. G ; Sharif University of Technology
2009
Abstract
Nickel and nickel-copper alloy modified glassy carbon electrodes (GC/Ni and GC/NiCu) prepared by galvanostatic deposition were examined for their redox processes and electro-catalytic activities towards the oxidation of glucose in alkaline solutions. The methods of cyclic voltammetry (CV) and chronoamperometry (CA) were employed. The cyclic voltammogram of NiCu alloy demonstrates the formation of β/β crystallographic forms of the nickel oxyhydroxide under prolonged repetitive potential cycling in alkaline solution. It is also observed that the overpotential for O 2 evolution increases for NiCu alloy modified electrode. In CV studies, NiCu alloy modified electrode yields significantly higher...