Sharif Digital Repository

In the present study, the process of recycling spent lithium batteries by co-precipitation method has been investigated. The process of regeneration of lithium batteries by co-deposition method consists of four stages. In the first stage, the cathodic material is separated from the aluminum foil using NMP solution, and then the cathodic material is heat treated at a temperature of 700 degrees. In the second stage, using sulfuric acid and hydrogen peroxide, the cathode material is leached at 60 ° C, pulp density 55 g / l, time 100 minutes, sulfuric acid concentration 3.25 M and volume percentage of hydrogen peroxide. 10% More than 99% of lithium, nickel, cobalt and manganese are leached. In... 

Titanomagnetites are resources of iron and titanium. high level of titanium in titanomagnetites makes using them in iron making processes very difficult. In this work an attempt was made to produce an iron bearing and a titanium bearing product using solid state reduction of Fanouj mine titanomagnetite concentrate. For this purpose, the concentrate was reduced using coal and then was subjected to magnetic separation. In this work, effect of temperature, time, added coal amount, and additive amount on reduction was studied. The result showed that the optimum conditions are 1325 celsius degree, 2.5 hours, 25 percent added coal and 2 percent additive. In optimum conditions a magnetic product... 

Due to recent progresses in lowering the temperature of SOFC, using metallic interconnects instead of ceramic interconnects was possible. Among the alloys used for interconnects, ferritic stainless steels (FSS) due to thermal expansion coefficient compatible with other cell components and cheap fabrication, have become the most widely used material for interconnects. Because of improvement of oxidation resistance of these FSSs, many studies have been made on coating of oxides on FSSs and results show that the spinel oxides have the best performance. In this study, the CuCo2O4 performance as coating in SOFC's interconnects was investigated. Coating process used was sol-gel dip coating and raw... 

Cold Briquetted Iron and Carbon (CBIC) is a new product in Direct Reduced Iron (DRI) family that aims to produce a reliable product from Cold Direct Reduced Iron (CDRI) with the ability of low risk, high efficient storage and handling. In this study, a comprehensive investigation was carried out on the effects of environmental condition on physical and chemical properties of CBIC, CDRI and Hot Briquetted Iron (HBI) in the first step and then, the steelmaking performance of this new product was compared to the other DRI products in the second step. The changes of microstructure, specific surface area, metallization degree and mechanical strength of different products with time in dry and... 

In this study, Lithium recovery process from lithium-ion battery was investigated by electrodialysis method. First, the cathode of the battery was leached in NMP to separate cathode from aluminum foil. Then, the cathode was leached in sulfuric acid with concentration 3.25 M and 10 volume percent hydrogen peroxide that pulp density was 55 g/L at 60°C for 100 minutes. in the next step, an electrodialysis cell was designed and created to recover lithium. And the influence of time, voltage, flow rate of feed solution, concentration of electrode solution and concentration of feed solution on process was investigated. Purpose of this project were investigated lithium ion recovery rate, lithium... 

In the present project, in order to be self-sufficient and optimal use of boron mines in Iran, a study entitled “The effect of process variables on the production of boric acid” has been conducted, This project has two main objectives: the first objective is the production of boric acid from boron sources and mines in Iran and the second objective is to analyze the effect of variables such as temperature, time, acid concentration, solid to liquid ratio and particle size on the purity of boric acid produced. And finally achieve the optimal conditions for the production of boric acid.In this study, boric acid was made from leaching hydrobracite (magnesium-calcium ore with boron) with sulfuric... 

Nowadays, too much attention has been paid to Solid Oxide Fuel Cells (SOFC). One of the key components in SOFC is interconnect which plays an important role in SOFC performance. Interconnect can be either a metallic or ceramic layer that sits between each individual cell. The reduction in operating temperature of SOFC resulted in interests in using metallic interconnectors. However, the oxidation of these metallic materials is big challenge. Chromium (Cr), Nickel (Ni) and Iron (Fe) alloys have been employed to overcome this deficiency. However, these alloys bring another difficulty which is the presence of active elements such as Cr which reduces the performance of interconnects by forming... 

Formation of nanoparticles by the gas phase condensation process is one of the most promising methods for the nanoparticles synthesis. Finding the correlations between adjustable parameters of the process and nanoparticles properties depends on how parameters affect the mechanism of nucleation and growth. The use of classical nucleation theory at nanoscale leads to unacceptable results; hence, approaches such as molecular dynamic simulation (MD) have been proposed to investigate the mechanism of nucleation and growth at atomic scale. In the present work, the formation of iron clusters from a supersaturated gas phase was investigated via molecular dynamics simulation. For thermalization of... 

Solvent extraction of vanadium (V) from sulfated leaching solution of the converter slag of the Isfahan steel company followed by stripping of this element from the organic solvent were examined in this study. In the experimental section, 2-ethyl-1-hexanol extractor was utilized for selective separation of V(V) from the acidic medium containing Si, Na, Fe, Al, Ca, and P ions. Ammonium chloride solution was also used for stripping V from the organic phase. Under optimal condition (pH=1.9, T=65℃, extractor concentration of 68% and organic phase volume fraction of 0.66), 91% was extracted in solvent extraction stage. Under optimal stripping conditions (pH=7.5, T=25℃, organic phase volume... 

One of the basic resources for lithium extraction is brine which is very abundance in Iran. It is important to characterize these brines and their compositions to select a suitable method for lithium recovery from them. By investigation of the local brines and determining lithium and other alkali metals composition in them, the ion exchange process using titanium dioxide ion-sieve with nanotube morphology is suggested as highly effective method for lithium extraction from Iranian brines. Due to high advantages of hydrothermal process, TiO2 nanotubes were produced by this method and the optimum parameters of hydrothermal reactions were reported. In this way, hydrogen titanate nanotubes with... 

The present work describes sensing application of modified TiO2 nanotubes towards detection of dopamine. The TiO2 nanotubes electrode was prepared using anodizing method at different conditions, among which NaF/ NaHSO4 solution and voltage of 15 V was chosen as the optimum condition. In order to improve the performance, surface modification with metal nanoparticles (Pd, Pt and Au) and carbon is required using “pulse electrodeposition” and “decomposition of polyethylene glycol at 600 °C” respectively. Carbon was deposited by decomposition of polyethylene glycol in a tube furnace to improve the conductivity. In this regard two type of electrodes were proposed: Pd-Pt-Au-TiO2 and C-Ni(Pt)-TiO2.... 

As one of the most important agglomeration methods, pelletizing has a very important place in the iron and steel production chain. In the present study, the feasibility of improving FeO index in the final product of Pellet Factory No.1 of GolEGohar Mining and Industrial Company was investigated. The remaining FeO in the iron oxide pellet represents the amount of Magnetite that was not oxidized during the pelletizing process. The remaining FeO in the primary Magnetite is a disturbing structure for the direct reduction process and will cause a decrease in the compressive strength of the pellet (CCS) and as a result it will be crushed. Therefore, the percentage of the remaining FeO in the... 

Dye-Sensitized solar cells are the third generation of solar cells that have the potential to increase efficiency as much as solar cells of previous generations, along with lower prices. The cathode electrode of the pigmented solar cell as one of the essential components of the cell plays the role of accelerating the oxidation reaction reduction of the electrolyte. Platinum often is used as a catalyst layer. To reduce production costs and maintain cell viability, platinum should replace with other materials at a lower cost and higher electrochemical activity. Recently, carbon materials have been considered for the production of inexpensive solar cells with suitable performance. Among... 

In this study, leaching of Sarcheshmeh Reverberatory Furnace Dust was investigated in the H2SO4-O3 media. Response surface methodology based on central composite face-centered design (RSM-CCF), was applied to optimize the operating parameters. The optimum conditions to obtain the main goal of maximum copper and minimum iron dissolution from dust were identified to be temperature of 30˚C, leaching time of 3hr, initial pH of 0.5, pulp density of 20% and ozone flow rate of 1g/h. The copper and iron concentrations of leaching solution were found to be 27.11 and 0.89983 g/L under the optimum conditions, respectively. The results showed that selective copper extraction from the dust could be... 

This investigation presents synthesis and characterization of pure and monophasic hydroxyapatite (Ca10(PO4)6(OH)2; HA) Nanostructures prepared by coral and oyster shell powders heated at 800 oC for 8 h as precursor via precipitation method. The morphology of HA nanostructures was controlled in the presence of various surfactants such as SDS, CTAB and PVP. The HA Nanorods synthesized by SDS were applied to fabricate bone scaffolds. Particle sizes of the HA Nanoparticles were about 20-30 nm. Pours three-dimensional HA/Ge/CMC scaffolds cross-linked by citric and oxalic acids were synthesized. In order to increase the pore size of the scaffolds, NaCl with medium (180-250 µm) and large (420-500... 

Metal foams are considered as a group of new materials and are applied widely in various areas due to their particular properties such as low density, high strength-to-weight ratio and appropriate mechanical, thermal, physical, electrical and magnetic properties. The aim of the present study is acquiring the technical knowledge of Zinc foam production by melting route and also optimizing the effective parameters on the foam stability. For this reason, 4 Zinc foams were produced at different times and temperatures. The amount of Calcium as the melt fluidity reducing agent and Titanium hydride and Zinc carbonate as the blowing agent were the same in all the specimens. The effect of heat... 

Direct Reduction of magnetite concentrate with thermal coal in concentric cylindrical arrangement has been investigated. At first, thermal behavior and physical and chemical properties of 3 type of coals from different coal mines of Iran in a thermal treatment similar to pre heating section of tunnel kiln direct reduction of Iron were investigated.Study of changes in reactivity and calorific values of coal in addition to providing a fundamental understanding of coal performance in the thermal process of reduction set a base for investigation of recycling of unburnt coal in the reduction process. Thermogravimetric data for coal devolatilization in three heating rates yielded an activation... 

The Fe-Ni-Co alloy to borosilicate glass seals have been used for many years as hermetic and electrically insulating seals. It is not only excellent in thermal expansion matching but also in good wettability and bond strength too. Oxidation of Kovar was performed in Water vapor, Saturated Nitrogen and N2-H2-H2O atmosphere in tube furnace. Oxide layer composition and thickness changed by varying in oxidation temperature and time. XRD analysis showed different Iron oxides in oxide layer, FeO, Fe3O4 and Fe2O3. However in the third atmosphere no Hematite observed. Increasing oxidation temperature and time result in increasing sample weight gains and roughness. Oxide layer microstructure also was... 

In Iran, titanium dioxide is still not produced and imports of titanium dioxide are required by various industries, including dyeing, electrodeposition, plastics and Therefore, according to the Ministry of Industries and Mines objectives, to obtain the technology of extraction Ti and TiO2, a research was carried out on titanomagnetite concentrate, extracted from the minerals of the plancher titanumitent and low-grade kahnoj. In this research, titanium dioxide is produced by sulfate method. Solid state recovery and magnetic separation were used to isolate titanium and iron. The dissolution process was then performed to achieve maximum dissolution. At this stage, the effects of temperature,... 

Today, recycling lithium as a valuable metal from brine plays an important role in various applications such as battery manufacturing, computers, aerospace and automobiles. Among the aqueous methods available for the extraction of the lithium element in brines, ion exchange by TiO2 nanosorbents is one of the most efficient methods. In this study, first the titanium dioxide nanotubes were well synthesized by anodizing method and the nanograss created after the anodizing process were completely eliminated. Then, the effect of three cathodes of aluminum, graphite and stainless steel in order to select the best cathode and achieve a regular morphology as well as their replacement with platinum...