Sharif Digital Repository

Titanium carbide MXene (Ti_3 C_2 T_x) has attracted significant research interest because of its extraordinary advantages as advanced electrode material for energy storage. In this study, 4-aminodiphenylamine functionalized Ti_3 C_2 T_x/polyaniline composite synthesized by in situ growth of PANI on 4-aminodiphenylamine functionalized Ti_3 C_2 T_x nanosheets. First, Ti_3 C_2 T_x MXene nanosheets was prepared according to the minimally intensive layer delamination (MILD) method followed by sonication. Ti_3 C_2 T_x nanosheets were modified with 4-aminodiphenylamine diazonium salt. The FTIR، FE-SEM and EDS analysis were used to characterize modified Ti_3 C_2 T_x. Finally, the Ti_3 C_2 T_x... 

In this research, a nanocomposite blend of polyamide 6/polystyrene containing polyaniline-coated carbon nanotubes was fabricated via melt blending method, aiming to achieve electrical conductivity in the range of static dissipation. The effect of weight percentage of nanofillers and surface modification of carbon nanotubes with polyaniline on the electrical properties and microstructure of the nanocomposite was investigated. To promote compatibility between the immiscible polyamide 6 and polystyrene polymers, PS-g-MA compatibilizer was utilized, and its effect on the morphology of the nanocomposite blend was examined. Additionally, the influence of weight percentage of nanofillers and the... 

Nowadays, with the increasing number of polyethylene terephthalate wastes, the issue of its recycling has become very important. Among the problems of polyethylene terephthalate recycling are its loss of crystallinity and mechanical properties. Recycled polyethylene terephthalate does not have the properties of new polyethylene terephthalate and using its mixture with other materials is an effective way to remove its waste from nature and return it to the production cycle. The aim of this study is to produce a mixture of recycled polyethylene terephthalate with polycarbonate and glass fibers with mechanical properties such as good impact strength, which ultimately leads to the production of... 

Stress whitening is a type of discoloration that can occur in variety of polymers used in automotive and household industries. The current research tries to investigate the effective microstructural parameters such as strain rate, rubber second phase, and branched polypropylene (PP) on the stress whitening in polypropylene in order to propose toughed PP blends with limited stress whitening. It is shown that increasing the strain rate in tensile test results in formation of more visible whitened area within the plastically deformed zone. This is the consequence of further growth of micro-voids at higher strain rates. The results are in accordance with the Mie scattering concepts. Besides, the... 

The consumption of plastics in the world is increasing and this is accompanied by the challenges of production from oil products and carbon footprint, waste production and environmental issues. The solutions to these challenges are material recycling and the production of biocompatible plastics. Polypropylene is a widely used polymer that is commonly used in conjunction with reinforcements such as fiberglass. Natural fibers can be substituted to increase the biocompatibility of the composite, which, despite its many advantages, presents challenges. The most important challenge is the poor adhesion of the fibers and the matrix due to the hydrophilicity of natural fibers and hydrophobicity of... 

Controlled release is a crucial factor in tissue engineering and cancer-therapy applications. The main purpose of current research is to synthesis smart magnetic nanocarriers for hydrophobic drug and embedding them in a fibrous platform for anti-cancer/ tissue engineering applications. In this regard, three different drug delivery systems of magnetic nanocolloid, magnetic fibers and hydrogels were studied. In the first phase, superparamagnetic iron oxide nanoparticles (SPIONs) were synthesized and then were modified using oleic acid and thermo-sensitive polymer of pluronic F127/F68. After characterization of this composite, Response Surface Methodology (RSM) was applied to model the lower... 

Active packaging is a novel approach that can ensure food safety by removing undesirable compounds such as Oxygen, ethylene, moisture, and microbial contamination from fresh produce's environment and reducing product loss by extending shelf life. Current research on active food packaging materials focuses on using biopolymers such as carbohydrates, proteins, and lipids as alternatives to non-degradable petroleum-based packaging materials. Active nanomaterials are commonly used to impart functionality to packaging materials. However, the lack of functionality limits their industrial application.Therefore, the main objective of this work was to fabricate bioactive nanocomposite films by... 

In this study, the synthesis conditions of polyaniline were optimized in order to produce a blend based on polypropylene (PP) containing polyaniline (PANI) with the electrical conductivity in the antistatic range. A form of PANI that has adequate electrical conductivity and thermal stability, which is suitable for melt-mixing and melt-spinning conditions, was synthesized. Thermal stability and electrical conductivity of polyaniline were investigated by thermal gravimetric analysis (TGA), differential calorimetric analysis (DSC) and high-temperature electrical conductivity. It was found that the synthesized PANI has required thermal stability and electrical conductivity (106 ohm.cm) at the... 

Polyamide 6 (PA6) / Polyphenylene oxide (PPO) nanoblends containing carbon naotube (CNT)/conductive carbon black (CCB) with incorporation of PPO-g-MA compatibilizer, physical and chemical dispersing agents were prepared via melt blending method. The effect of carbonic nano additives weight percent, incorporation of physical dispersing agent, PA6 viscosity, PPO weight percent and sequential mixing were investigated. Modified CNT with physical dispersing agent studied by thermal gravimetric analysis (TGA), fourier-transform infrared spectroscopy (FTIR) and Raman spectroscopy and PPO-g-MA studied by FTIR and titration. Also, nanoblend morphologies, CNT/CCB dispersability and CNT/CCB selective... 

According to human needs and in line with the development of advanced technologies, different biomedical Engineering fields like hard tissue implants are growing rapidly. Despite significant biotechnology Developments in recent years, some problems to the recognition of implants related osseointegration phenomena persist. The deficient osseointegration and implant-associated infections are key issues for the long-term clinical success of titanium and titanium alloy implants, while development of multifunctional surfaces that can simultaneously overcome these problems remains highly challenging. Therefore, the ultimate goal of this paper was to improve bone cell attachment and simultaneously... 

The use of polymers is increasing day by day due to low density, reasonable price and ability to produce different products. On the other hand, the accumulation of polymer wastes in nature is one of the environmental concerns in today's world, which is mainly due to the widespread use of polymers in the packaging industry and disposable applications. In order to solve this problem, recycling is recommended as the most appropriate and economical solution. Because in addition to consuming polymer waste, it also saves energy and reduces carbon footprint.Polyethylene terephthalate (PET) is one of the polymeric materials which; It has a special place in the packaging industry and is widely used... 

In this research, a polyethylene / thermoplastic film containing ethylene adsorbent nanostructure was fabricated to package agricultural products and increase the shelf life of fruits and vegetables. The thermoplastic starch containing 60 wt% starch and 40 wt% plasticizers with weight ratios of 5: 1, 4: 1, and 3: 1 sorbitol to glycerol was added to the polyethylene film to determine the composition of the final film. The film was prepared by a combination of low-density polyethylene with 10wt % linear low-density polyethylene, 30 wt% thermoplastic starch (4: 1 sorbitol to glycerol ratio), and 3wt% PE-g-MA as compatibilizer. Then, halloysite nanotubes were added to the film as ethylene... 

The main focus of this project is the fabrication of surface engineering scaffolds based on polyurethane and titanium dioxide. The research's aim is the creation of the synergistic properties of TiO2 and PU as a new strategy for engineering artificial autologous blood vessels. In the first section, PU-TiO2 nanocomposites were synthesized by co-insitu synthesis of nanoparticles and polymer. The nanocomposite films were prepared by solvent casting and thermally induced phase separation methods. Mechanical and biological properties of films were compared with pure PU film. In solvent casting method, the outcomes revealed that the rate of endothelialization of the nanocomposite scaffold after 7... 

Polypropylene (PP) is one of the most widely used commercial plastics in various industrial applications due to its desirable physical and mechanical properties and low cost. Engineering properties of this polymer depend very much on its crystalline structure. It is a common practice in polymer industry to modify crystalline structure by means of nucleating agents. Since nucleating agents are added in a rather low level to polymers, some investigators have tried this task in modifying crystalline structure of polypropylene by incorporating nucleating agent masterbatches. However, none have looked at the possible influence of the carrier resin in such masterbatches on the performance of... 

One of the most popular methods in order to protect foods is to package using various materials. By this act, the shelf life of the packaged foods may range from a few days to more than a year. Multiple types of plastics are being used as materials for packaging food, including polyolefin, polyester, polyvinyl chloride, polyvinylidene chloride, polystyrene, polyamide, and ethylene vinyl alcohol. Although more than 30 types of plastics have been used as packaging materials, polyolefin and polyesters are the most common. Biaxially Oriented Polypropylene (BOPP) is a polypropylene film that has been stretched in both the machine and cross directions. BOPP film has become one of the most popular... 

Polyamide-6 is a thermoplastic polymer that is classified as electrically non-conductive materials. One way of adding conductivity to the polymer matrices is by utilizing them in a nanocomposite form. Superior mechanical and electrical properties of Carbon Nanotubes make them worthy of being chosen as reinforcement in nanocomposites to extend their operation to a broader range of applications, like conductive nanocomposites, mainly polymer-based matrices. The Nanotubes have chemical affinity and tend to entangle and aggregate. Because of this, to achieve a uniform and remarkable electrical conductivity is hard-to-reach. state of entanglement effects correctly melt methods of polymer blend... 

In this research, we studied the effect of compatibilizer and short glass fiber on microstructure and mechanical properties of PBT/PC blends. Fisrt, Antioxidants and sodium pyrophosphate dibasic were used to suppress transesterification in PBT/PC Blend. The results showed that best composition occur when both of them are used. In the next step, we used 3%wt MBS (methyl methacrylate-butadiene-styrene) and saw that this weight percent of this compatibilizer doesn’t useful. Moreover addition of short glass fiber to PBT/PC was examined and the results showed that mechanical properties of composite are extensively increased. Also in this step, we proved this idea that we can replace some of PBT... 

Polypropylene (PP) is a fast growing polymer, particularly in automotive industry, where PP compounds have replaced many different parts made of conventional materials. In the first step, PP-g-MA, as compatibilizer, was synthesized. Two kinds of polypropylenes including a homo- and a block co-polymer were incorporated for this goal. Characterizations via titration and FTIR tests revealed higher degree of grafting reaction when homo-polymer was used for synthesizing PP-g-MA. In the next step, nanocomposites containing 3 wt% nanoclay with three different PP-g-MA/nanoclay ratios of 1:1, 2:1 and 3:1were made using a co-rotating twin screw extruder. Tensile, impact and XRD tests were performed to... 

Recently, Polypropylene has been extensively used in a variety of applications in the polymer industry, but its quite low stiffness and toughness limit this polyolefin’s application in the engineering functions; thus, the market of polymer blend and composite manufacturing has grown noticeably in the last few years. In the current project, short Flax fibers are used in order to reinforce the PP matrix. Firstly, Flax fibers were washed with the gentle and harsh condition during the alkalization process, then the optimized alkalization condition was determined through comparison of results from X-ray Diffraction (XRD ), Attenuated Total Reflectance FTIR (ATR-FTIR) and microscopic surface... 

Polycarbonate (PC) is known as one of the engineering plastics with remarkable mechanical properties, but the application of this polymer is limited due to its high notch sensitivity. Blending polycarbonate with other polymers such as acrylonitrile butadiene styrene (ABS) is a method to resolve this disadvantage. PC/ABS blends are commonly used in automotive industry, electrical and electronic devices. As PC and ABS are not completely miscible, a variety of compatibilizers are used to achieve a suitable microstructure and high engineering properties. Considering crucial applications of PC/ABS blends, different flame retardants are also used to reduce the flammability. These flame retardants...