Sharif Digital Repository

A comparative investigation has been developed for the stability constants of several amino acid complexes with divalent metal ions, which have been determined by potentiometric pH titration. Depending on the metal ion-binding properties, vital differences in the building complexes were observed. The present study indicates that in some M(L) complexes, metal ions are arranged in carboxyl groups, but in other M(L)complexes, some metal ions are able to build chelate over amine groups. The results mentioned-above demonstrate that for some M(L) complexes, the stability constants are also largely determined by the affinity of metal ions for amine group. This leads to a kind of selectivity of... 

The acidity and stability constants of M (MNPPAP) (MNPPAP: 2((4-methyl-5-nitro-6-(pyrrolidine-l-yl)pyrimidine-2-yl)amino)propionic acid) M: Cu2+, Cu (Bpy)2+ (Bpy: 2,2'-Bipyridine), or Cu(Phen) (Phen: 1,10-Phenanthroline) complexes were determined by potentiometric pH titration. It is shown that the stability of the binary Cu (MNPPAP) complex is determined by the basicity of the carboxylate group on one side and amine group on the other side. It is demonstrated that the equilibrium, Cu(Har)2+ (H ar: Heteroaromatic ligand such as Bpy or Phen) + Cu(MNPPAP) ^ Cu(Har)(MNPPAP) + Cu2+, is displacement due to the well known experience that mixed ligand complexes formed by a divalent 3d ion, a... 

Metabonomics and other "omic" fields are essential science in analytical chemistry. Modern analytical instruments such as proton nuclear magnetic resonance (1H-NMR) can provide the great quantity of analytical information. In order to assign unknown samples, chemometric methods recognition build classification model based on experimental data. Firstly, some current strategies regarding disease diagnosis are exhibited in metabonomic studies. Some diseases such as crohn's disease can be difficult to diagnose since its signs and symptoms may be similar to other medical problems or often mimic other symptoms. Applications of NMR and supervised pattern recognition in the field of metabonomics are... 

An efficient one-pot, three-component synthesis of novel dispiro[oxindole-3,3′-pyrrolidines] by 1,3-dipolar cycloaddition of azomethine ylides, in situ generated by reaction of 1,2-diones with sarcosine and subsequent decarboxylation, with a series of (E)-3-benzylidene-2,3-dihydro- 1H-indol-2-ones is reported. Molecular complexity is generated in only one synthetic step. All reactions proceed with excellent regioselectivity and in good-to-excellent yields. The workup is easy, the reaction times are short, and no catalyst is required. © 2013 Verlag Helvetica Chimica Acta AG, Zürich  

The promise of graphene for use as a vapor sensor motivated exploration of the vapor responses of graphene nanomesh (GNM) functionalized with single stranded DNA. Devices detected different vapor types, including carboxylic acids, aldehydes, organophosphates, and explosives. As-fabricated GNM field effect transistors (FETs) had larger vapor responses than standard graphene FETs due to the effect of oxidized edges and lattice defects. DNA-GNM devices discriminated between homologous species with detection limits of a few parts per million, with fast response and recovery. Responses varied significantly when the base sequence of the DNA was changed, making the sensor class an intriguing... 

The present study deals with preparing stimuli-responsive poly N-isopropyl acryl amide/chitosan (PNCS) nano hydrogel and looks into their effects as a surface modifying system of cotton fabric. The semi-batch surfactant-free emulsion polymerization method was proposed to reduce the size of particle and synthesis of PNCS nano particles. Fourier transform infrared, nuclear magnetic resonance, differential scanning calorimetry, scanning electron microscopy and dynamic light scattering methods confirmed the nano size of synthesized PNCS particles and sensitivity of these nano particles to the different temperature and pH, respectively. The water retention capacity (WRC) and carboxyl content of... 

Low structure carbon black (CBN330), conductive high structure carbon black (CBXE2B) and carboxylated multiwalled carbon nanotube (MWCNT) were loaded into the blend of natural rubber (NR) and styrene butadiene rubber (SBR) at different contents up to 10 phr. Kraus plots showed that all the reinforcements interact with NR/SBR blend appropriately. However, the CBXE2B whose interfacial area is the highest showed greatest value of Kraus interaction parameter. Flory-Rhener model and effective torque value revealed that all of the reinforcements enhanced the crosslink density, among them CBXE2B showed the highest impact and MWCNT placed in the second rank. It was also shown that the cure kinetic... 

Magnetic Fe3O4@SiO2 starch-graft-poly(acrylic acid) (SPAA) nanocomposite hydrogels were prepared and used as absorbents for removal of crystal violet from aqueous solutions. Dynamic swelling, effect of contact time, absorption kinetics and nanocomposite hydrogel mass for removal of crystal violet dyes from aqueous solutions were studied. Fourier transform infrared spectroscopy, scanning electron microscopy and vibrating sample magnetometer measurements were used for the characterization of the nanocomposite hydrogels. The nanocomposite hydrogels had high magnetic sensitivity under an external magnetic field, which allowed their magnetic separation from water, thus avoiding secondary... 

Water dispersed magnetic nanoparticles (DMNPs) of γ-Fe 2O3 represent a simple and green catalyst for the rapid three-component synthesis of tetrahydro-4H-chromene and hexahydroquinoline carboxylate skeletons via single-pot domino Knoevenagel-Michael-cyclization reactions  

This work focused on the design of new pH-responsive nanoparticles for controlled delivery of anticancer drug doxorubicin (Dox). Nanoparticles of poly(methacrylic acid)-polysorbate 80-grafted starch (PMAA-PS 80-g-St) were synthesized by using a one-pot method that enabled simultaneous grafting of PMAA and PS 80 onto starch and nanoparticle formation in an aqueous medium. The particles were characterized by FTIR, 1H NMR, TEM, DLS, and potentiometric titration. Dox loading and in vitro release from the nanoparticles were investigated. The FTIR and 1H NMR confirmed the chemical composition of the graft terpolymer. The nanoparticles were relatively spherical with narrow size distribution and... 

Wastewater of purified terephthalic acid (PTA) from a petrochemical plant was examined in a membrane-less single chamber microbial fuel cell for the first time. Time course of voltage during the cell operation cycle had two steady phases, which refers to the fact that metabolism of microorganisms was shifted from highly to less biodegradable carbon sources. The produced power density was 31.8 mW m-2 (normalized per cathode area) and the calculated coulombic efficiency was 2.05 % for a COD removal of 74 % during 21 days. The total removal rate of different pollutants in the PTA wastewater was observed in the following order: (acetic acid) > (benzoic acid) > (phthalic acid) > (terephthalic... 

Salep phosphate modified biopolymers with different phosphate contents were prepared via reacting salep (a multi-component polysaccharide obtained from dried tubers of certain natural terrestrial orchids) with a solution of primary and secondary sodium phosphates under basic conditions in a semidry process. Structural characterization of salep phosphates were carried out by 31P NMR, FT-IR spectra and TGA curves. Determination of the phosphate content in samples was done by a standard spectrophotometric method. Then, novel (salep phosphate)-based hydrogels were synthesized by graft copolymerization of acrylic acid (AA) monomer onto salep phosphate backbones. Effect of the phosphate contents... 

The kinetics of bioleaching of Mo, Ni, and Al from spent hydrocracking catalyst, using Aspergillus niger was studied. The four most effective bioleaching variables were selected in accordance with the Plackett-Burman design and were further optimized via central composite design (CCD). The optimal values of the variables for maximum multi-metal bioleaching were as follows: particle size 150-212. μm, sucrose 93.8. g/L, pulp density 3%. w/v, and pH 7. The maximum metal recoveries corresponding to these conditions were 99.5 ± 0.4% Mo, 45.8 ± 1.2% Ni, and 13.9 ± 0.1% Al. The relatively low Ni extraction was attributed to the precipitation of Ni in the presence of oxalic acid. Under the optimal... 

A novel kind of a biopolymer-based superabsorbent composite, salep-g-poly(sodium acrylate)/alumina, was prepared from salep, sodium acrylate, and alumina by aqueous polymerization, using N,N'-methylenebisacrylamide (MBA) as a cross-linker and ammonium persulfate (APS) as an initiator. The reaction parameters [i.e., acrylic acid (AA), MBA, APS amounts, and neutralization percentage of AA as well as alumina/salep weight ratio] affecting the water absorbency of the hydrogel composite were optimized using systematic method to achieve a composite with high swelling capacity as possible. The swelling behavior of optimum superabsorbent composite was measured in various pH solutions. In addition,... 

The novel coumarin-3-carboxamides (=2-oxo-2H-1-benzopyran-3-carboxamides) 5a-5g containing lipophilic spacers were synthesized through the Ugi-four-component reaction (Scheme 1). The reactions of aromatic aldehydes 1, 4,4'-oxybis[benzenamine] or 4,4'-methylenebis[benzenamine] as diamine 2, coumarin-3-carboxylic acid (=2-oxo-2H-benzopyran-3-carboxylic acid; 3), and alkyl isocyanides 4 lead to the desired substituted coumarin-3-carboxamides 5a-5g at room temperature with high bond-forming efficiency. These novel coumarin derivatives exhibit brilliant fluorescence at 544 nm in CHCl 3  

A simple bio-conjugation procedure to surround a single horseradish peroxidase (HRP) enzyme molecule with dendritic polyester macromolecules (polyester-32-hydroxyl-1-carboxyl bis-MPA dendron, generation 5) was proposed. The characterization of resultant nanoparticles entitled HRP dendrozyme, was performed by transmission electron microscopy, dynamic light scattering, gel permeation chromatography and Fourier transform infrared spectroscopy. The results showed that HRP nanoparticles were spherical in shape and have an average size of 14 ± 2. nm in diameter. Furthermore, bio-conformational characterization of HRP dendrozyme was performed by means of circular dichroism and fluorescence... 

In this study, we attempt to synthesize novel acrylated agarose (ACAG)-based hydrogels with three different crosslinking densities. Acrylate groups were inserted onto agarose (AG) backbone through homogeneous reaction of acrylic monomers with AG backbone. Hydrogels were synthesized through radical copolymerization of a mixture of acrylic acid and 2-hydroxyethyl acrylate with ACAG in aqueous solution using ammonium persulfate as an initiator. Infrared spectroscopy (FTIR) was carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was assessed by scanning electron microscopy. The equilibrium swelling capacities of synthesized hydrogels were evaluated... 

Alcohol-specific superabsorbing gels (superalcogels) based on non-neutralized acrylic acid (AA, 60-94 mol%) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) were prepared via solution polymerization in water. Polyethylene glycol dimethacrylate and potassium persulfate were used as crosslinker and initiator, respectively. Characterization of samples was performed using FTIR, 1H-NMR and thermomechanical analyses. Glass transition temperature and modulus of dried samples were found to be directly changed with their AA content. The gels exhibited enormous ability for absorbing and retaining a variety of mono- and poly-hydric alcohols. For example, in lieu of one gram of a typical sample... 

This article demonstrates the properties of open-cell flexible polyurethane foams incorporating multi-walled carbon nanotubes. Three different types of highly functionalized nanotubes having carboxyl, hydroxyl and amide functional groups were synthesized. Neat polyurethane foam and three nanocomposite foams filled with 0.1 wt% of treated nanotubes were prepared. It was found that thermal stability, mechanical properties and acoustic damping were improved significantly by incorporation of small amounts of nanotubes. The nanotubes modified with carboxyl groups were found to have much more influence compared to the other two functional groups, possibly due to better interfacial interaction and...