Sharif Digital Repository

Chemical vapour deposition (CVD) at atmospheric pressure, using TiCl 4 as a precursor, was used to grow nanostructured TiO2 films on glass substrates. At relatively low temperatures (∼245 °C) and using relatively high reactant concentrations, different nano-morphologies of TiO2 were formed simultaneously, such as spheres, nanowires and mesoporous structures. The TiO2 spheres were successfully applied as light-scattering particles in dye-sensitized solar cells, either by direct deposition onto electrodes in the reactor, or by preparation of a printing paste from the deposited particles. For dye-sensitized solar cells using the organic dye D35 as sensitizer and a cobalt-complex based redox... 

A mixture of multi-walled carbon nanotube/graphite paste electrode modified with a salophen complex of cobalt was prepared and was applied for the study of the electrochemical behavior of 6-mercaptopurine (MP) using cyclic and differential pulse voltammetry (DPV). An excellent electrocatalytic activity toward the oxidation of MP was achieved, which led to a considerable lowering in the anodic overpotential and remarkable increase in the response sensitivity in comparison with unmodified electrode. Utilizing DPV method, a linear dynamic range of 1-100 μM with detection limit of 0.1 μM was obtained in phosphate buffer of pH 3.0. The electrochemical detection system was very stable, and the... 

We describe an intelligent co-simulator for real time production control of a complex flexible manufacturing system (CFMS) having machine and tool flexibility. The manufacturing processes associated with the CFMS are complicated with each operation being possibly done by several machining centers. The co-simulator design approach is built upon the theory of dynamic meta-model based supervisory control with the cooperation of its own embedded intelligent blocks. The system is implemented by coupling of the centralized simulation controller (CSC) and real-time simulator for enforcing dynamic strategies of shop floor control. The posteriori adaptive co-simulator is equipped with a concurrent... 

The electrochemical oxidation of sumatriptan on the surface of carbon paste electrode modified with multi-walled carbon nanotube and cobalt methyl-salophen complex is studied by using cyclic voltammetry and polarization studies. The results indicate that the drug is irreversibly oxidized in a one electron oxidation mechanism. It was found that the peak potential shifted negatively with increasing pH, confirms that H + participate in the oxidation process. The electrode is shown to be very effective for the detection of sumatriptan in the presence of other biological reductant compounds. The prepared modified electrode exhibits a very good resolution between the voltammetric peaks of... 

The acidity and stability constants of M-Met (M: M2+; Met 1: L-methionine) complexes, determined by potentiometric pH titrations, were used to make a comparative investigation with L-cysteine (Cys). It is shown that regarding to M ion - binding properties vital differences on complex bilding were considered. It is demonstrated, that in M-Met complexes, M ion is coordinated to the carboxyl group, M ion is also able to build macrochelate over amine group. The upmentioned results demonstrate that for M-Met complex the stability constants is also largly determined by the affinity of Cu2+ for amino group but in opposite to Met, some metal ions such as Co2+, Cu2+, and Zn2+ build with Cys 2... 

Effects of pH, D2EHPA, Cyanex® 272 and Cyanex® 302 on extraction of zinc, manganese and cobalt from a Zn-Mn-Co-Cd-Ni containing solution at the room temperature was comprehensively investigated. Addition of Cyanex® 302 indicated a left-shifting-effect on the extraction curve of zinc, a right-shifting-effect on the extraction curve of manganese and no effect on the extraction of cobalt. Addition of Cyanex® 272 shifted all three curves to the right. Therefore, the most suitable extractant for separation of zinc from manganese was therefore 0.3-0.3 mixture of D2EHPA and Cyanex® 302, and that for separation of manganese from cobalt was pure D2EHPA. The stoichiometric coefficient for the... 

Magnetite nanoparticles with a size distribution of 15-21 nm were synthesized and decorated onto surface of graphene oxide by ultrasound assisted precipitation. Size and size distribution of the obtained M-GO hybrid were appreciably finer than the hybrids prepared by stirring method. M-GO is a superparamagnetic material with saturation magnetization of 31 emu g-1. The Langevin equation was successfully applied for estimation of size of Fe3O4 nanoparticles in M-GO hybrid, with maximum error of 17.5%. The study put forward a formation mechanism for M-GO, based on instrumental analyses. Adsorption isotherms of Sr2+ and Co2+ ions, which were fitted by Langmuir monolayer... 

A metal-organic framework [Co3(BDC)3(DMF)2(H2O)2] was synthesized and structurally characterized. X-ray single crystal analysis revealed that the framework contains a 2D polymeric chain through coordination of 1,4-benzenedicarboxylic acid linker ligand to cobalt centers. The polymer crystallize in monoclinic P21/n space group with a=13.989(3) Å, b=9.6728(17) Å, c=16.707(3) Å, and Z=2. The polymer features a framework based on the perfect octahedral Co-O6 secondary building units. The catalytic activities of [Co3(BDC)3(DMF)2(H2O)2]n for olefins oxidation was conducted. The heterogeneous catalyst could be facilely separated from the reaction mixture, and reused three times without significant... 

In the present work, the roles of inorganic oxide nanoparticles on the extraction efficiency of polyethylene terephthalate-based nanocomposites were extensively studied. Four fiber coatings based on polyethylene terephthalate nanocomposites containing different types of nanoparticles along with a pristine polyethylene terephthalate polymer were conveniently electrospun on stainless steel wires. The applicability of new fiber coatings were examined by headspace-solid phase microextraction of some environmentally important volatile organic compound such as benzene, toluene, ethylbenzene and xylene (BTEX), as model compounds, from aqueous samples. Subsequently, the extracted analytes were... 

In this study, graphene materials have been synthesized with solid camphor (C10H16O) and methane gas as carbon precursors using atmospheric pressure chemical vapor deposition (CVD) technique at a temperature range of 900-1000 °C for a period of 45 min over copper nanoparticles. Influence of the carbon precursors upon the shape, number of layers and yield of the synthesized graphene samples has been investigated. In this venue, the compounds synthesized were functionalized with oxygen groups and impregnated by cobalt and molybdenum active phases. Moreover, the total metal loading and Co/Mo weight ratio of prepared compounds were adjusted to their industrial nominal values of 10% and 0.33,... 

In this paper we study graphs all of whose star sets induce cliques or co-cliques. We show that the star sets of every tree for each eigenvalue are independent sets. Among other results it is shown that each star set of a connected graph G with three distinct eigenvalues induces a clique if and only if G = K1, 2 or K2, ..., 2. It is also proved that stars are the only graphs with three distinct eigenvalues having a star partition with independent star sets. © 2008 Elsevier Inc. All rights reserved  

Selective catalytic reduction (SCR) of NOx by NH3 over a series of Mn–M/Z catalysts (M = Cr, Mn, Fe, Co, Ni, Cu, Zn, and Z = the ZSM-5 Zeolite) synthesized by wet impregnation method was investigated. Mn–Fe/Z, Mn–Co/Z, and Mn–Cu/Z catalysts exhibited approximately 100 % NOx conversion over a wide temperature range (200–360 °C) in a defined atmospheric condition, which was noticeably greater than that of Mn–Cr/Z (340–360 °C). Furthermore, the effect of addition of second metal oxide species to the initial Mn/Z catalyst on the structure of catalysts was studied by several characterization techniques. BET measurements revealed high surface area and pore volume of the Mn–Cu/Z catalyst. In... 

Monometallic and bimetallic supported metal oxides catalysts on γ-alumina were prepared by heterogeneous deposition-precipitation. The γ-alumina used as a support was synthesized by the sol-gel and the co-precipitation methods. Supports and catalysts were characterized by Brunauer–Emmett–Teller (BET) surface area, X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The performance of the prepared catalysts was studied for total oxidation of toluene in air at different relative humidity and oxidation temperatures. Efficiency of bimetallic catalysts for deep oxidation of toluene was... 

Up to now, multifunctional varistor-capacitor materials were based on TiO2, even though these materials failed to have practical applications. For the first time, in this research, multifunctional varistor-capacitor properties are observed in the CuO-doped SnO2-CoO-Sb2O3 system. The XRD analysis showed that this system has a single phase microstructure. SEM images indicated that the CuO addition resulted in a better densification and larger grain size. The very low electric breakdown field of the CuO-doped SnO2-CoO-Sb2O3 system (12 V/mm, similar to TiO2), is a consequence of coarse-grained microstructure. This varistor had a suitable surge withstand capability as well. The colossal... 

An unusual heterobimetallic bis(triphenylphosphane)(NO2)AgI–CoIII(dimethyl-glyoximate)(NO2) coordination compound with both bridging and terminal –NO2 (nitro) coordination modes has been isolated and characterized from the reaction of [CoCl(DMGH)2(PPh3)] (DMGH2 is dimethylglyoxime or N,N′-di-hydroxybutane-2,3-diimine) with excess AgNO2. In the title compound, namely bis(dimethylglyoximato-1κ2O,O′)(μ-nitro-1κN:2κ2O,O′)(nitro-1κN)bis(triphenyl-phosphane-2κP)cobalt(III)silver(I), [AgCo(C4H7N2O2)2(NO2)2(C18H15P)2], one of the ambidentate –NO2 ligands, in a bridging mode, chelates the AgI atom in an isobidentate κ2O,O′-manner and its N atom is coordinated to the CoIII atom. The other –NO2 ligand... 

In this work, V, Co-codoped TiO2(B) samples are synthesized through a hydrothermal method, and used as negative electrode materials for lithium ion batteries. The amount of dopants is varied in order to investigate their influence on electrochemical properties. The formation of V, Co-codoped TiO2(B) nanobelts with widths of 20 and 60 nm is demonstrated using X-ray diffraction, X-ray photoelectron spectroscopy, inductively coupled plasma–optical emission spectrometry and field-emission scanning electron microscopy analyses. In addition, the electrochemical properties of the samples are tested by cyclic voltammetry, charging/discharging, and cyclic performance techniques. Compared to other... 

Here in, for the first time, we report a new and simple procedure for preparing reduced graphene oxide/nickel-cobalt double layered hydroxide composite on the nickel foam (Ni-Co LDH/rGO/NF) via a fast and simple two-step electrochemical method including potentiostatic routes in the presence of CTAB as a cationic surfactant. Graphene oxide coated nickel foam prepared by simple immersion method. After that, the prepared electrode reduced electrochemically to obtain rGO/NF electrode. Finally, the rGO/NF electrode was used as cathode for electrodeposition of Ni-Co LDH in the presence of CTAB as cationic surfactant. The prepared electrodes were characterized by field emission scanning electron... 

In this paper, the interactions of cobalt(III) tetradentate Schiff-base complexes, [Co(S-MeO-salophen)]ClO4, (1), [Co(5-NO 2-salophen)]ClO4, (2), and [Co(5-Br-salophen)]ClO 4, (3), with dopamine, an important neurotransmitter, have been investigated. The formation and kinetic constants for complex formation of [Co(3-MeO-salophen)]ClO4, (1), with dopamine were determined spectrophotometrically in H2O/EtOH solution (4:1) at 30°C by using the Benesi-Hildbrand and Guggenheim equations, respectively. The stoichiometry has been found to be 1:1. The rate and equilibrium constants for the coordination of dopamine to (Co(3-MeO-salophen)]ClO4 were found to be 0.0053 min-1 and 1600 dm3 mol-1,... 

In this study, crumpled-shape nanocomposite of nitrogen and sulfur co-doped ZnO–CeO2 (NSZC) was deposited on FTO substrate using one-step ultrasonic spray pyrolysis. Zinc acetate, cerium nitrate, and thiourea were dissolved in deionized water and used as starting solution. The samples were characterized using FESEM, XRD, UV–vis spectroscopy, EIS, and PL. The as-prepared nitrogen and sulfur co-doped ZnO–CeO2 nanocomposites were evaluated as high photocatalysts for degradation of methyl orange. Nearly 100% photocatalytic degradation of methyl orange was achieved for 180 min. The photoluminescence and electrochemical impedance spectroscopy revealed that co-doping of nitrogen and sulfur could... 

In this study, EVAc/PLA/organo clay nanocomposites were prepared via solution mixing method. The SEM images were used to investigate the morphology of nanocomposites revealing no phase separation or agglomeration of disperse phase in EVAc/PLA blends and nanocomposites. SAXS spectra confirmed the intercalated morphology of nanocomposites. Soil burial test were carried out and the rate of degradation of the samples were measured indirectly. Oxygen gas permeability of EVAc was slightly decreased by adding PLA to the matrix, when small loads of clay caused dramatic improvement in barrier properties. Melt rheological frequency sweep test illustrated the compatibility of EVAc with low contents of...