Sharif Digital Repository

The impacts of dopant nanoparticles, graphene nanosheets (GNSs) and cobalt decorated-graphene nanosheets (CoGNSs), were studied in relation to the wettability and rheological behavior in low-Ag lead-free SAC0307 (Sn–0.3Ag–0.7Cu) solder paste. The solidification range of the solders was evaluated using differential scanning calorimetry. Phase identification in the solder bulk and interface of the solder and copper substrate was carried out by X-ray diffraction and energy-dispersive X-ray spectroscopy. Spreading properties and reactive wetting behavior along with the rheological properties of the solders were also studied. Results showed that the addition of both nanoparticles did not... 

Synthesizing efficient electrode materials for water splitting and supercapacitors is essential for developing clean electrochemical energy conversion/storage devices. In the present work, we report the construction of a ruthenium cobalt oxide (RuCo2O4)/Ti3C2Tx MXene hybrid by electrophoretic deposition of Ti3C2Tx MXene on nickel foam (NF) followed by RuCo2O4 nanostructure growth through an electrodeposition process. Owing to the strong interactions between RuCo2O4 and Ti3C2Tx sheets, which are verified by density functional theory (DFT)-based simulations, RuCo2O4/Ti3C2Tx MXene@NF can serve as a bifunctional electrode for both water splitting and supercapacitor applications. This electrode... 

There has been a growing demand for materials with superior absorption capabilities, such as strong absorbing capacity, thin thickness, and light weight, to solve challenges related to EM radiation pollution. While the majority of the research is focused on optimizing material compositions, component microstructure and absorber structure are also critical factors for improving microwave absorption performance. In this research, we show how the microstructure of components and absorber design may increase dissipation features. Solvothermal and hydrothermal methods were utilized for synthesizing mesoporous CuS micro-particles with a 3D hierarchical structure as a dielectric component and... 

Gadolinium (Gd) and cobalt (Co) substituted Sr–Ba–Cu-based Y-type hexaferrites were synthesized with the help of the sol–gel auto-combustion route. XRD (X-ray diffraction) analysis was done to ratify the phase formation of hexaferrites. The impact of Gd3+ substitutions was measured on all the lattice parameters. Lattice constants “a” and “c” were found between 5.879–5.891 Å and 43.185–43.620 Å, respectively. It was observed from the XRD analysis that with an increase in Gd–Co contents, the enhancement in the average crystallite size is noted. The thermal decomposition process was studied using TGA (thermogravimetric analysis), revealing that the precursor may give the ending product when... 

Magnetite nanoparticles with a size distribution of 15-21 nm were synthesized and decorated onto surface of graphene oxide by ultrasound assisted precipitation. Size and size distribution of the obtained M-GO hybrid were appreciably finer than the hybrids prepared by stirring method. M-GO is a superparamagnetic material with saturation magnetization of 31 emu g-1. The Langevin equation was successfully applied for estimation of size of Fe3O4 nanoparticles in M-GO hybrid, with maximum error of 17.5%. The study put forward a formation mechanism for M-GO, based on instrumental analyses. Adsorption isotherms of Sr2+ and Co2+ ions, which were fitted by Langmuir monolayer... 

In this study, crumpled-shape nanocomposite of nitrogen and sulfur co-doped ZnO–CeO2 (NSZC) was deposited on FTO substrate using one-step ultrasonic spray pyrolysis. Zinc acetate, cerium nitrate, and thiourea were dissolved in deionized water and used as starting solution. The samples were characterized using FESEM, XRD, UV–vis spectroscopy, EIS, and PL. The as-prepared nitrogen and sulfur co-doped ZnO–CeO2 nanocomposites were evaluated as high photocatalysts for degradation of methyl orange. Nearly 100% photocatalytic degradation of methyl orange was achieved for 180 min. The photoluminescence and electrochemical impedance spectroscopy revealed that co-doping of nitrogen and sulfur could... 

A metal-organic framework [Co3(BDC)3(DMF)2(H2O)2] was synthesized and structurally characterized. X-ray single crystal analysis revealed that the framework contains a 2D polymeric chain through coordination of 1,4-benzenedicarboxylic acid linker ligand to cobalt centers. The polymer crystallize in monoclinic P21/n space group with a=13.989(3) Å, b=9.6728(17) Å, c=16.707(3) Å, and Z=2. The polymer features a framework based on the perfect octahedral Co-O6 secondary building units. The catalytic activities of [Co3(BDC)3(DMF)2(H2O)2]n for olefins oxidation was conducted. The heterogeneous catalyst could be facilely separated from the reaction mixture, and reused three times without significant... 

The water-soluble cobalt(II) tetradentate Schiff base complex [Co(II)L](ClO4)2, L: (N,N′-bis{5-[(triphenylphosphonium)-methyl]salicylidine}-o-phenylenediamineperchlorate has been synthesized and characterized. This complex forms charge transfer (CT) complexes with imidazole and 1-methylimidazole. The formation constant, molar absorptivity (ε′), and thermodynamic parameters for charge transfer complexes formation of cobalt(II) Schiff base complexes with imidazole derivatives were determined by using UV-vis spectrophotometric method in aqueous solutions at constant ionic strength (I = 0.2 mol dm-3 KNO3) at pH 6.0 and various temperatures between 292 and 315 K. © 2007 Elsevier B.V. All rights... 

We have investigated the effect of bias voltage on sheet resistance, surface roughness and surface coverage of Co/NiO x magnetic bilayer. In addition, interface topography and corrosion resistance of the Ta/Co/Cu/Co/NiO x /Si(1 0 0) system have been studied for Co layers deposited at an optimum bias voltage. Atomic force microscopy (AFM) and four point probe sheet resistance (Rs) measurement have been used to determine surface and electrical properties of the sputtered Co layer at different bias voltages ranging from 0 to -80 V. The Co/NiO x bilayer exhibits a minimum surface roughness and low sheet resistance value with a maximum surface coverage at Vb=-60 V resulted in a slight increase of... 

In this investigation, the crystalline structure of a nanometric CoSi 2 layer, formed in heat treated Co/W x Ta (1-x) /Si(1 0 0) systems, has been studied by XRD analysis. Careful measurements of the diffraction intensities revealed that temporary formation of a metastable diamond cubic structure of CoSi 2 phase, rather than its usual CaF 2 structure, was occurred. It has been shown that formation of this metastable structure depends on the kind of the applied interlayer in addition to the annealing temperature. Among the studied systems with x = 0, 0.25, 0.5, 0.75 and 1, the second and the last systems resulted in growing a (1 0 0) single-texture CoSi 2 layer with the preferred usual CaF 2... 

Experimental parameters have direct influences on materials properties and therefore their applications. The effect of plasma power on the properties of cobalt oxide thin films, prepared using plasma-enhanced chemical vapor deposition technique, on stainless steel substrates have been addressed in this paper. The structural, morphological, and compositional properties of these films were investigated by means of X-ray diffraction (XRD), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) technique. The XRD patterns demonstrated the growth of polycrystalline Co3O4 thin film with a cubic spinel structure such that the intensity of (511) and (311) peaks increase as the... 

In this paper, the interactions of cobalt(III) tetradentate Schiff-base complexes, [Co(S-MeO-salophen)]ClO4, (1), [Co(5-NO 2-salophen)]ClO4, (2), and [Co(5-Br-salophen)]ClO 4, (3), with dopamine, an important neurotransmitter, have been investigated. The formation and kinetic constants for complex formation of [Co(3-MeO-salophen)]ClO4, (1), with dopamine were determined spectrophotometrically in H2O/EtOH solution (4:1) at 30°C by using the Benesi-Hildbrand and Guggenheim equations, respectively. The stoichiometry has been found to be 1:1. The rate and equilibrium constants for the coordination of dopamine to (Co(3-MeO-salophen)]ClO4 were found to be 0.0053 min-1 and 1600 dm3 mol-1,... 

The formation constants for 1:1 molecular complex formation between water-soluble cobalt(II) tetradentate Schiff base complex, disodium[{bis(4- methoxy-5-sulfo-salicylaldehyde)-4,5-dimethyl-o-phenylenediiminato}cobalt(II)], Na2[Co(SO3-4-meosal-4,5-dmophen)], and nucleotides, adenosine-5′-triphosphate (ATP) and cytidine-5′-triphosphate (CTP), in mixed solvent systems of ethanol and water with different volume fractions of ethanol and water have been determined spectrophotometrically at constant ionic strength (I = 0.2 mol dm-3 NaClO4) and temperature 278 K. Trends in the values of formation constants according to the volume fractions of ethanol and water in ethanol and water mixed solvent... 

Effective utilization of solar energy is an urgent global issue for solving current environmental problems and the energy crisis. A challenging issue in water splitting for solar fuel production is developing high performance and scalable photo/electro catalysts using low cost approach. Here, CoO x nanostructures were grown on anodized TiO 2 nanotube arrays (TNAs) by amperostatic electrodeposition method as oxygen evolution reaction (OER) photoanodes. The effects of electrodeposition current density and deposition time on the growth of so-called nanostructures were investigated based on photoelectrochemical (PEC) measurements and structural characterizations. X-ray diffraction patterns of... 

The phase-pure multiple ternary or quaternary metal selenides in energy boosting, have not been reported yet. Here, self-supported porous crystalline Zn–Ni–Co/Cu selenides microballs arrays were constructed by selenation of the designed tubular Cu(OH)2 arrays decorated with ultrathin Zn–Co–Ni tri-metallic hydroxide on carbon cloth substrate. For this rational engineering, a novel precursor sample was firstly prepared by conversion of deposited Cu layer to hollow tubular Cu(OH)2 arrays on carbon cloth, then, Zn-Co–Ni layered ternary hydroxides with a thin layer structure was deposited around this tubular arrays. The selenation with an exciting morphology change from amorphous tube to highly... 

In this work, we have studied single-texture formation of CoSi2 layer in heat-treated Co/Ta0.7W0.3/Si(100) structure. Moreover, self-encapsulation process of the CoSi2 layer and surface roughness of the encapsulated layer, as a contact layer, has been examined. A direct current magnetron co-sputtering technique was employed to deposit a 10 nm Ta0.7W0.3 alloy intermediate layer. After growth of the layer on the Si substrate, a 25 nm Co layer was deposited using thermal evaporation method. Post-annealing process of the films was treated in an N2(80%) + H2(20%) ambient in a temperature range from 400 to 1000 °C for 60 min. X-ray diffraction analysis showed that a single-texture CoSi2 layer with... 

High-performance textile-based energy storage systems with high energy and power densities alongside remarkable cyclic life are always at the leading edge of wearable electronics. Herein, commercial cotton fabrics (CCFs) are used as the substrates for the fabrication of ultra-light, high-performance wearable supercapacitors. Hierarchical microstructures of nickel-cobalt sulfide (Ni-Co-S) decorated single-walled carbon nanotubes (SWCNTs) are used as the positive supercapacitor electrodes. Enhanced electrochemical performance with a specific gravimetric capacity of 331 Cg−1 (at a current density of 0.3 Ag−1) is obtained from these Ni-Co-S@SWCNT@CCF electrodes. Besides, composites of graphene... 

Exploring bi-functional electrocatalysts with excellent activity, good durability, and cost-effectiveness for electrochemical hydrogen and oxygen evolution reactions (HER and OER) in the same electrolyte is a critical step towards a sustainable hydrogen economy. Three main features such as high density of active sites, improved charge transfer, and optimized electronic configuration have positive effects on the electrocatalyst activity. In this context, understanding structure–composition–property relationships and catalyst activity is very important and highly desirable. Herein, for the first time, we present the design and fabrication of novel MOF-derived ultra-small Ru/RuO2 nanoparticles... 

In the present work, the roles of inorganic oxide nanoparticles on the extraction efficiency of polyethylene terephthalate-based nanocomposites were extensively studied. Four fiber coatings based on polyethylene terephthalate nanocomposites containing different types of nanoparticles along with a pristine polyethylene terephthalate polymer were conveniently electrospun on stainless steel wires. The applicability of new fiber coatings were examined by headspace-solid phase microextraction of some environmentally important volatile organic compound such as benzene, toluene, ethylbenzene and xylene (BTEX), as model compounds, from aqueous samples. Subsequently, the extracted analytes were... 

The acidity and stability constants of M-Met (M: M2+; Met 1: L-methionine) complexes, determined by potentiometric pH titrations, were used to make a comparative investigation with L-cysteine (Cys). It is shown that regarding to M ion - binding properties vital differences on complex bilding were considered. It is demonstrated, that in M-Met complexes, M ion is coordinated to the carboxyl group, M ion is also able to build macrochelate over amine group. The upmentioned results demonstrate that for M-Met complex the stability constants is also largly determined by the affinity of Cu2+ for amino group but in opposite to Met, some metal ions such as Co2+, Cu2+, and Zn2+ build with Cys 2...