Sharif Digital Repository

Recently, remote sensing considered as important tool in studies of water quality issues. The Aras River flows across a transboundary basin in northern Iran. In this study, the aim is to model the water quality parameters (WQPs) using remote sensing and an artificial neural network (ANN), which is a new method proposed to find WQPs based on multivariate regression approaches. The relationship between WQPs and digital data from the Sentinel-2 satellite was determined to estimate and map the WQPs in this river. Using the field data and digital image data, the obtained results show that multivariate regression approaches and high-resolution remote sensing could monitor and predict the... 

Perceiving the electrical behavior of the rock/brine and the crude oil/brine interfaces gives insight into the performance of engineered waterflooding. Compared to the rock surface, few studies have attempted to comprehend the complex behavior of the crude-oil surface electrical behavior. To reveal the impact of each ion on the surface charge of crude oil, the zeta potential of crude oil/single-salt brines (including NaCl, CaCl2, MgCl2, Na2SO4, and NaHCO3) was measured in a wide range of salinity. Then, the counterpart interfacial tension (IFT) was measured to determine the capability of each brine in bringing carboxylic acid groups from crude-oil bulk (COOH) to crude oil/brine interface... 

In the present contribution, a new approach based on mutual information (MI) is proposed for exploring the independence of feasible solutions in two component systems. Investigating how independent are different feasible solutions can be a way to bridge the gap between independent component analysis (ICA) and multivariate curve resolution (MCR) approaches and, to the best of our knowledge, has not been investigated before. For this purpose, different chromatographic and hyperspectral imaging (HSI) datasets were simulated, considering different noise levels and different degrees of overlap for two-component systems. Feasible solutions were then calculated by both grid search (GS) and... 

The high aspect ratio and unique thermal and electrical characteristics of carbon nanofiber (CNF) made it an ideal physical barrier against the penetration of corrosive ions. However, the poor compatibility of the CNF with the polymer matrix and the lack of active corrosion inhibitors are the key limitations of this nanomaterial, resulting in short-term anti-corrosion resistance. An intelligent self-healing epoxy (EP) coating, including CNF modified with a polydopamine (PDA)-La3+ complex, was successfully fabricated to overcome these issues. Electrochemical impedance spectroscopy (EIS) evaluation implied that mild steel (MS) submerged in a 3.5 wt % NaCl solution containing the CNF-PDA-La... 

Two carbon composite materials were prepared by mixing avocado biochar and methyl polysiloxane (MK). Firstly, MK was dissolved in ethanol, and then the biochar was added at different times. In sample 1 (R1), the time of adding biochar was immediately after dissolving MK in ethanol, and in sample 2 (R2), after 48 h of MK dissolved in ethanol. The samples were characterized by nitrogen adsorption/desorption measurements obtaining specific surface areas (SBET) of 115 m2 g−1 (R1) and 580 m2 g−1 (R2). The adsorbents were further characterized using scanning electron microscopy, FTIR and Raman spectroscopy, adsorption of vapors of n-heptane and water, thermal analysis, Bohem titration, pHpzc, and... 

Chiral recognition has long been a challenging issue to deal with in biological systems, drug design and food authentication. Implementing nanoparticle-based probes with intrinsic or induced chirality in this field has addressed several issues concerning sensitivity, reliability, rapidness and the cost of chiral sensing platforms. Yet, research into chiral nanoprobes that can be used for visual monitoring of chiral substances is still in its infancy. As part of this study, a visual chiral recognition platform has been developed in which a combination of blue-emitting carbon dots (BCDs) and mercaptopropionic acid-capped CdTe quantum dots (MPA-QDs) with inherent chiroptical activity were... 

Overexpression of proteins/antigens and other gene-related sequences in the bodies could lead to significant mutations and refractory diseases. Detection and identification of assorted trace concentrations of such proteins/antigens and/or gene-related sequences remain challenging, affecting different pathogens and making viruses stronger. Correspondingly, coronavirus (SARS-CoV-2) mutations/alterations and spread could lead to overexpression of ssDNA and the related antigens in the population and brisk activity in gene-editing technologies in the treatment/detection may lead to the presence of pCRISPR in the blood. Therefore, the detection and evaluation of their trace concentrations are of... 

Separation and isolation of suspended submicron particles is fundamental to a wide range of applications, including desalination, chemical processing, and medical diagnostics. Ion concentration polarization (ICP), an electrokinetic phenomenon in micro-nano interfaces, has gained attention due to its unique ability to manipulate molecules or particles in suspension and solution. Less well understood, though, is the ability of this phenomenon to generate circulatory fluid flow, and how this enables and enhances continuous particle capture. Here, we perform a comprehensive study of a low-voltage ICP, demonstrating a new electrokinetic method for extracting submicron particles via flow-enhanced... 

Hybrid nanoparticle comprising of nanosilica (NS) and nanodiamond (ND), denoted by ND@NS, was synthesized by a two-step chemistry route and then incorporated into styrene-butadiene rubber (SBR) at low concentrations up to 5 phr by a two-roll mill. Physical hybrids of NS and ND, i.e., ND&NS, with a weight ratio similar to chemical hybrid (80:20 for NS:ND), were also incorporated into SBR. Field emission scanning electron microscopy observations revealed very fine dispersion of nanoparticles in the case of physical hybrids (ND&NS). In contrast, agglomerations and aggregation of nanoparticles were evidenced for ND@NS. Tensile and dynamic mechanical analyses exhibited a higher reinforcing effect... 

The size of the rock specimen affects the stress concentrates in the vicinity of the top/bottom of the rock specimen during the evaluation of the geomechanical parameters in the laboratory, which causes unreliable results. However, the appropriate size for geomechanical evaluation is not well understood yet because of limitations in the sampling and analysis. In this study, a series of numerical simulations using a finite element package was conducted to investigate the effect of sample aspect ratio, fluid saturation, and porosity, on the mechanical behavior of the rock under elastic and poroelastic conditions. In addition, two concepts, stress/strain homogeneity index (SHI) and... 

Heart attack is one of the most common causes of death in the world. Coronary artery disease is the most recognized cause of heart attack whose onset and progression have been attributed to low-density lipoprotein (LDL) passing through the wall of the artery. In this paper, hemodynamic variables as well as the concentration of LDL through the coronary porous artery at the Left Anterior Descending coronary artery (LAD), and its first diagonal branch (D1) under the heart motion investigated using computational simulation. The geometry that has been studied in this paper is the first bifurcation of Left Anterior Descending (LAD) that has been placed on a perimeter of hypothetical sphere... 

In recent years, the importance of capturing CO2 has increased due to the necessity of minimizing climate change and the detrimental effects of CO2 emissions from industrial processes. CO2 absorption, as one of the most mature carbon capture technologies, has been improved by introducing nanosized particles into liquid absorbents. Nanofluids have been the subject of interest in many studies recently due to their tremendous impact on absorption. This review comprehensively examines the CO2 absorption behavior for nanofluids through the investigation of different absorption systems. Potential mechanisms for improving the absorption/regeneration performance of nanoabsorbents as well as the... 

The treatment of water contaminated by bacteria is becoming a necessity. The nanomaterials possessing both intrinsic antibacterial properties and photocatalytic activity are excellent candidates for water disinfection. The powdered form of nanomaterials can be aggregated while embedding the nanomaterials into the NFs can overcome the limitation and enhance the photocatalytic activity and transition from UV-light to visiblelight. Here, graphene oxide (GO) was synthesized, grafted to chitosan, and decorated with silver nanoparticles (Ag NPs) to produce Ag-decorated reduced GO-graft-Chitosan (AGC) NPs. The blends of polyacrylonitrile (PAN) and AGC NPs were prepared in various concentrations of... 

Application of construction and demolition (C&D) wastes were considered as sustainable development goals (SDGs) for maintaining raw materials. Also, lightweight concretes such as aerated autoclaved concrete (AAC) were used for partitioning spaces in the building industry. Moreover, the waste products of the mentioned materials were increased due to the rise of old construction demolitions. This study contributes a calcinated aerated autoclaved concrete (CAAC) which is efficient, powerful, highly rapid, non-expensive and novel adsorbent for the removal of cationic dyes including malachite green (MG), methyl violet (MV) and methylene blue (MB) form water samples. The impacts of different... 

Due to the widespread use of pesticides and their harmful effects on humans and wildlife, monitoring their residual amounts in crops is critically essential but still challenging regarding the development of high-throughput approaches. Herein, a colorimetric sensor array has been proposed for discrimination and identification of triazole fungicides using monometallic and bimetallic silver and gold nanoparticles. Aggregation-induced behavior of AgNPs, AuNPs, and Au-AgNPs in the presence of four triazole fungicides produced a fingerprint response pattern for each analyte. Innovative changes to the metal composition of nanoparticles leads to the production of entirely distinct response patterns... 

In this study, a series of Zirconium-based MOF and chitosan composites (MOF-808/chitosan) were synthesized as efficient adsorbent for Cr(VI) ions elimination from aqueous solution. MOF-808/chitosan structure and morphology was characterized by FE-SEM, EDX, XRD, BET, zeta potential analysis, FT-IR, XPS techniques. The kinetic studies ascertained that Cr(VI) adsorption over MOF-808/chitosan followed pseudo-second-order kinetic model. The adsorption isotherms fitted the Langmuir isotherm model, implying on homogeneously adsorption of Cr(VI) on the surface of MOF-808/chitosan. According to the Langmuir model, the maximum capacity was obtained to be 320.0 mg/g at pH 5. Thermodynamic investigation... 

Magnetorheological fluids (MRFs) are a category of functional materials that exhibit magneto-mechanical coupling. These materials exhibit a reversible and instantaneous change from a free-flowing Newtonian fluid to a semi-solid state upon application of a magnetic field. In contrast to ordinary fluids, MRFs can tolerate shear stresses up to a yield value in the presence of a magnetic field. The yield stress strongly depends on intensity of the applied magnetic field and volume fraction of magnetic particles. As the yield stress is the most important parameter of an MRF and must be considered in the design of MR devices, in this work, effects of magnetic field and volume fraction of particles... 

The electrokinetic energy conversion, electroviscous effect, and induced internal and external magnetic fields in a smart polyelectrolyte grafted "soft"nanopore with pH responsiveness are studied here using an efficient molecular theory approach. The analysis is based on writing the total free energy of the system, including the conformational entropy of the flexible, self-avoiding polymer chains and the translational entropy of the mobile species, the electrostatic interactions, and the free energy due to chemical equilibrium reactions. Then, the free energy is minimized, while satisfying the necessary constraints to find the equilibrium state of the system. The predictions of the model are... 

Clay liners are widely used as porous membrane barriers to control solute transport and to prevent the leakage of leachate both in horizontal and vertical flow scenarios, such as the isolated base and ramps of sanitary landfills. Despite the primary importance of saturated hydraulic conductivity in a reliable simulation of fluid flow through clay barriers, there is no model to predict hydraulic conductivity of clayey soils permeated with saline aqueous solutions because most of the current models were developed for pure water. Therefore, the main motivation behind this study is to derive semi-empirical models for simulating the hydraulic conductivity of clayey soils in the presence of... 

A numerical examination is carried out on the experimental MILD turbulent spray burner of Delft Spray in Hot Co-flow, DSHC. The RANS approach is combined with the Lagrangian tracking of droplets for modeling the pressure-swirl atomizer. The EDC combustion model is employed, to take into account detailed chemical mechanisms. Predictions show that the structure of the triple-flame of liquid fuel in the atmospheric condition is different from the conventional gaseous triple-flames. Furthermore, the structure of the MILD spray flame is compared to the non-MILD spray flame. The flame index shows that the triple-flame structure in the conventional spray flame that consists of two outer and middle...