Sharif Digital Repository

The use of braced frames has become more popular in seismic design of buildings because of the simplicity in design and construction. The first event that occurs in the earthquake for a concentrically brace frame (CBF), is the buckling of the strut. The inelastic behavior of CBF systems is dominated by brace buckling, yielding and the post buckling behavior. The Inelastic performance of the brace is nonsymmetrical, because of the difference in the tensile and compressive strength of the brace and the deterioration in the resistance after buckling. so we have too complexity in modeling the inelastic performance of brace members. Also the subject of the near fault ground motion and design of... 

In this thesis velocity and temperature fields of concentric cylinders with rotation of inner wall have been investigated numerically. Air enters the gap between cylinders and attains fully developed in both velocity and temperature fields after certain lengths. Adiabatic and constant heat flux boundary conditions have been applied and Nusselt number was calculated. In order to analyze the variations of velocity and temperature fields, different angular velocities at constant axial Reynolds number and different axial velocities at constant angular velocity have been investigated. The turbulent stresses were approximated with k ?? ... 

This study has been carried out for investigating the need for an appropriate and fast seismic analysis method to be applied in performance based design (PBD), and show the application of Endurance Time (ET) method and it’s advantages in PBD. Necessary theories were generated in hazard analysis, bi-directional seismic analysis, introduction of dynamic push-over curve and application. As a secondary goal, potential of this method in more complicated nonlinear domains is assessed. Application of ET and its advantages in PBD is shown with an example of SMF, NDCBF, CBF and BRBF building after modeling nonlinear interactional behavior of beams and columns, and also modeling buckling and... 

This thesis investigates the performance of concentrically braced frames through numerical simulation approaches. During a moderate to severe earthquake, the bracing members and their connections are expected to undergo significant inelastic deformations into the post-buckling range. Recently, provisions for special concentrically braced frames (SCBFs) were developed to exhibit stable and ductile behavior in the event of a major earthquake. Special Concentrically Braced Frames (SCBFs) are distinguished from Ordinary Braced Frames in that they possess improved post-buckling capacity. Performance based evaluation of SCBF system as well as ordinary concentrically braced frame (OCBF) system... 

Considering high potential of solar energy and exhaustibility of fossil fuels in Iran, using solar energy seems to be inevitable. But one of the main problems in the application of these systems is high investment and maintenance costs. So, in this thesis, suitable solution is presented for decreasing cost and optimizing of a solar absorption refrigerator based on developed energy model. This system consists of two CPC solar collectors and a thermal energy storage system using phase change materials that provides input energy to the generator of absorption refrigerator. The exergy efficiency of system components is calculated by relations of energy model and exergy analysis. Then... 

These days, according to increasing requirement to the applications of clean rooms in industries in and within the developing industry of computer, positive indicators that show a real need to a compere comprehensive study and research about the Clean rooms, in oder to predict the distribution and dispersal of the particles. Correct determination of indoor airflow and particle concentration distribution results in new standard development for Clean rooms. As computational fluid dynamics has become a powerful tool for indoor airflow studies, in this research, influence of effective parameters on the flow and concentration distribution in clean rooms has been... 

To obtain solutions containing Titanium, leaching of Ilmenite Concentrate of Kahnooj and its Slag by Sulfuric Acid 98% in various Conditions are Studied. Screening tests by Fractional Factorial method were designed, at this step effects of Temperature, Acid Concentration, Particle Size, Solid to liquid Ratio, Time and Stirring Speed were investigated and It was Concluded that Temperature, Time, Acid Concentration and Particle Size were the effective Parameters in both leaching process of Ilmenite and Slag. The Temperature, Time and Acid concentration had positive effect, whereas the Particle Size had negative effect. After screening step, effective parameters were optimized by Rotatable... 

Classical theory of elasticity, which is founded upon results of mechanical experiments on the large scale materials, has reasonable results in predicting mechanical properties. The basic idea in this theory is that stress at a point of the material is only a function of the local strain and it is independent of the nonlocal strains. Therefore, the size of the material does not play any role in analyzing mechanical behavior of materials using this theory. However, results from experiments and atomic simulations have shown that in nano scale materials, such as carbon nanotubes (CNTs) and their composites, mechanical properties are strongly dependent on the size parameters of these materials.... 

The urine formation and excretion system has long been of interest for mathematicians and physiologists to elucidate the obscurities within the process happen in renal tissue. In this study, a novel and absolutely three-dimensional approach is utilized for modeling urine concentrating mechanism in rat renal outer medulla which is essentially focused on demonstrating the significance of tubule's architecture revealed in anatomic studies and physiological literature. Since nephrons and vasculatures work interdependently through a highly structured arrangement in outer medulla which is dominated by vascular bundles, a highly detailed functional unit is proposed and also it is strongly justified... 

Concentration brings a twofold result to the market. From one side, it reduces the competition and then the number of varieties in the market, which discourages consumption; from another side, however, it reduces the price of goods due to increasing returns to scale and so encourages consumption. This controversial role of concentration raises the question that which degree of concentration might be, say, optimum for the market. Based on the Krugman approach, this study makes a relation between the number of firms, export volume, marginal and average fixed cost of production. We show that when number of firms reduces in the market, export volume could increase because of a reduction in... 

In this research, we answer that whether trade liberalization increase market competition. First, we discuss this problem using inter-temporal comparison. To do this, we set a control variable group and a test variable group. The control variable group includes the industries that did not report trading and non-tradable industry in 1379 and 1386 (non-trading industries) and the test variable group includes industries that have entered the the trade in recent two years and are named trading industries. In this research, we study the effect of Herfindahl Index and markup on industry Openness,controlling for some factors. Using abovementioned influences, the relation between trade... 

This study aimed at using industrial organization approach for banks and the use of models of determining the market structure and the level of competition in Iran’s banking industry. Models of market structure determination are divided into two categories: structural models that are the same as calculation of concentration indices using market share and non-structural models that are the same as revenue-cost nature of economic enterprises. Structural models have been established based on two theories of structure-conduct-performance (SCP) and efficient structure (ES). The difference between these two perspectives depends on the good or bad nature of concentration in banking services market.... 

The kidneys serve essential regulatory roles in the body which remove excess organic molecules from the blood and the removal of waste products of metabolism. They are essential in the urinary system. Urinary concentration mechanism has long been interested for mathematicians and physiologists to elucidate the obscurities within the process. In this study, a novel three-dimensional approach is used for simulating urine concentrating mechanism in rat renal medulla. The model equations are based on three spatial dimensions mass and momentum transports. Exact 3D geometry has been designed by using COMSOL Multiphysics software and results have been compared with the latest available data. In... 

In this study, mesh-reinforced cellulose acetate (CA)-based membranes were prepared for forward osmosis (FO) by immersion precipitation. Casting composition, preparation conditions, evaporation time, coagulation bath temperature, annealing temperature, CA percent and 1,4-dioxane/acetone ratio were tested for membranes’ performance. Also, the results were compared with commercially CTA membranes. The FO membrane prepared under optimized conditions had a smooth surface similar to commercial ones. The most proper membrane (17.9 % polymer and 1,4-dioxane /acetone ratio 1.89) showed water flux of 9.3 L/m2.hr (LMH) and RSF of 0.536 mol NaCl/m2.hr. Using mesh in the membrane structure, different... 

Physicians use charts that are prepared by experiments on animals or humans to prescribe drug dosage for patients. This method requires much more time by the Ministry of Health to approve new drugs to be used in health-care centers. Furthermore،we have no sight on how a specific drug is going to be diffuse in our body. In order to predict the distribution of a drug or any minerals in the kidney we need to model it. The first step would be modeling the important species that influence the urine concentrating mechanism. Due to the complications in modeling that mechanism especially in the inner medulla zone، we hadn’t solid information regarding that area. It is about half a century that... 

In this Thesis, the behaviour of stell brace was studied in finite element models. In this section, a comparison between the results of these models and the results of experimental models which were done in past years, was carried out. It shows that these result is in good agreement with each other, Moreover it has been found that the primary cause of failure in the sample is local bucking and then change in the geometry of sample which will be followed by strain jumping in next cycles which shows the importance of local buckling due to the proximity of this event to strain jumps and can be accepted as braces limit state design.Finally, we try to predict the time of failure of samples with... 

In this study the behavior of steel bracings under cyclic loading, is modeled with finite element method. Analysis have shown that after local buckling in plastic mid-span position, due to the severe geometry change, the strain grows rapidly, The sharp growth of plastic strains is entitled as strain rises. Geometry change created will cause the collapse brace speeding up. In fact, the main local buckling can be used as a determinative factor in performance base design for steel braces. So the thesis has been investigated, using the parameters fracture life to quantify local buckling and fracture. Also with using the CVGM model, the fracture of the brace could be predicted. The analytical... 

Steel Concentrically Braced Frames are common lateral load resisting frames. Poor design of this system can lead it to premature failure of braces. This failure may be due to non-elastic buckling of brace members or their connections. Design Codes divide Concentrically Braced frames into two groups: Ordinary Concentrically Braced Frames and Special Concentrically Braced Frames and for each, specific limitations have been determined for width to thickness ration and slenderness. Many of these limitation have been obtained on the basis of experimental tests. In this thesis steel braces behavior under cyclic loading is studied. For parametric investigation, Finite Element Method is used. Abaqus... 

The objective of this project is numerical simulation of air flow and heat transfer between two horizontal concentric cylinders with rotation of inner cylinder and inertia of outer cylinder grooves on the inner cylinder. In this study, the air, meanwhile rotational motion by the inner cylinder will enter into the annular space between two cylinders with certain flow rate. It can be mentioned to cooling of power plant generators, Electric motors and rotating machines among usages of air flow between two cylinders. In this article the objective is calculation of pressure drop and Nusselt number, temperature distribution on the inner cylinder under conditions of constant temperature of... 

In this study, in the base case using a modeling system WRF=CAMx Distribution concentration of all pollutants from mobile sources in an episode of 60 days (November and December 2015) is calculated in Tehran. In this context, the emissions inventory related to mobile sources outputs the code in Fortran and WRF meteorological model to model air quality prepared and then using the CAMx, Tehran’s air quality is simulated. In order to verification in this case, the results of pollutant concentration NO2, CO, PM2٫5, with concentrations of air pollution monitoring stations compared. Given that in this study the concentration of pollutants from mobile sources is modeled, predicted by the model,...