Sharif Digital Repository

In this work, deformation behavior as well as creep and cavitation of AA7075-T76 were studied. The as-received plate was first stabilized utilizing solution treatment followed by two-stage artificial aging at 120 and 180 °C. Then, tensile tests were carried out on the aged-alloy in the temperature range between 120 and 250 °C under strain rates of 0.0005 and 0.005 s−1. Furthermore, stress-controlled creep tests were performed at temperatures varying between 120 and 210 °C at stresses ranging from 130 to 250 MPa. Microstructural evolution was then conducted to assess the microstructural changes and growth of cavities during creep employing optical metallography and scanning electron... 

Abstract: The hot deformation behavior of coarse-grained (CG), ultrafine-grained (UFG), and oxide dispersion-strengthened (ODS) AA6063 is experimentally recognized though carrying out compression tests at different temperatures (300–450 °C) and strain rates (0.01–1 s−1). Microstructural studies conducted by TEM and EBSD indicate that dynamic softening mechanisms including dynamic recovery and dynamic recrystallization become operative in all the investigated materials depending on the regime of deformation. Moreover, the high temperature flow behavior is considerably influenced by the initial grain structure and the presence of reinforcement particles. The constitutive and artificial neural... 

The main objective of this study is to predict the deformation behavior, strain localization, and forming limits of ferrite-pearlite steels by incorporating the contributions of the microstructural characteristics and mechanical properties of the underlying microstructure. A realistic microstructure-based micromechanical approach in the framework of the crystal plasticity (CP) model was carried out using the periodic representative volume element (RVE) generated from the scanning electron microscopy (SEM) image. The homogenized stress–strain curve of the realistic RVE was validated with the experimental data with an error of less than 6.71% at large strains. Afterward, the initial... 

Over past decades, extensive research has been performed on the measurement of land subsidence as a result of compaction of aquifer. This paper describes results from a new field-monitoring system to evaluate changes in matric suction and temperature profiles in soil layers over an extended time period. The monitoring system used in this study consists of inserting dielectric sensors into a 105 m borehole, drilled in a site in Ardabil Plain, The monitoring results from the site were used to calibrate predictions from HYDRUS-1D. The physical and hydraulic properties of the soil materials in different layers were obtained through performing some soil characteristics and filter paper tests... 

The effects of initial heat treatments, i.e. solution treating and over ageing, on deformation behavior of an age hardenable Al-Cu-Mg alloy, including mechanical properties and texture evolution, during multi-directional forging (MDF) are investigated. Hardness measurements, electron back scatter diffraction (EBSD) maps, and differential scanning calorimetry (DSC) are carried out. Mechanical behaviors of the alloy in terms of compressive stress and hardness test after MDF are investigated. In both solution treated and over-aged alloys, the compressive stress during MDF shows an increase up to the second pass, and by further straining the flow stress is decreased. However, shear and... 

Flow stress behavior of AA5086 was determined using tensile testing at different temperatures from room temperature to 500 °C and strain rates varying between 0.002 and 1 s−1. The strain rate sensitivity parameter and occurrence of dynamic strain aging were then investigated in which an Arrhenius-type model was employed to study the serrated flow. Additionally, hot deformation behavior at temperatures higher than 320 °C was evaluated utilizing hyperbolic-sine constitutive equation. Finally, a feed forward artificial neural network model with back propagation learning algorithm was proposed to predict flow stress for all deformation conditions. The results demonstrated that the strain rate... 

Uniaxial compression test at different temperatures [573 K to 723 K (300 °C to 450 °C)] and strain rates (0.01 to 1 s−1) was employed to study the hot deformation behavior of an ultrafine-grained (UFG) Al6063 alloy prepared by the powder metallurgy route. The UFG alloy with an average grain size of ~0.3 µm was prepared by mechanical milling of a gas-atomized aluminum alloy powder for 20 hours followed by hot powder extrusion at 723 K (450 °C). To elaborate the effect of grain size, the aluminum alloy powder was extruded without mechanical milling to attain a coarse-grained (CG) structure with an average grain size of about 2.2 µm. By employing the dynamic materials model, processing maps for... 

The present paper reports the effects of Nd:YAG laser welding on the microstructure, phase transformation, cyclic deformation behavior, and corrosion resistance of Ti-55 wt.% Ni wire. The results showed that the laser welding altered the microstructure of the weld metal which mainly composed of columnar dendrites grown epitaxially from the fusion line. DSC results indicated that the onset of the transformation temperatures of the weld metal differed from that of the base metal. Cyclic stress-strain behavior of laser-welded NiTi wire was comparable to the as-received material; while a little reduction in the pseudo-elastic property was noted. The weld metal exhibited higher corrosion... 

In this work, the flow stress behavior of a metal matrix composite AA2017-10% SiCp was studied by means of the uni-axial compression test. The composite was first produced by stir casting technique and then, hot extrusion with the ratio of 18:1 was carried out to achieve a microstructure with a homogeneous distribution of SiC particles. In the next stage, the isothermal compression tests were conducted on the cylindrical specimens up to the true strain of 0.6. The experiments were performed at temperatures between room temperature to 400°C and strain rates of 0.003, 0.03 and 0.3s-1. Negative strain rate sensitivity was observed in the temperatures less than 250°C indicating the occurrence of... 

Molecular dynamics simulations combined with quantitative atomic displacement analyses were performed to study the deformation behaviors of polycrystalline cementite (Fe3C). At low temperature and large grain size, dislocation glide acts as the preferred deformation mechanism. Due to the limited number of slip systems at low temperature, polycrystalline cementite breaks by forming voids at grain boundaries upon tensile loading. When the temperature rises or the grain size reduces, grain boundary sliding becomes the primary mechanism and plastic deformation is accommodated effectively  

Hot compression tests were carried out on a Fe-29Ni-17Co alloy in the temperature range of 900 °C to 1200 °C and at strain rates of 0.001-1 s-1. Dynamic recrystallization was found responsible for flow softening during hot compression. The flow behavior was successfully analyzed by the hyperbolic sine equation and the corresponding material constants A, n and α were determined. The value of apparent activation energy was determined as 423 kJ/mol. The peak and steady state strains showed simple power-law dependence on the Zener-Hollomon parameter. The dynamic recrystallization kinetics was analyzed using Avrami equation and the corresponding exponent was determined to be about 2.7. This... 

The current study proposes a simple constitutive model that integrates the kinetics of precipitation during static aging and the kinetics of precipitate dissolution during preheating to deformation temperature to predict the hot flow behavior of AA6063 alloy. The model relates the flow behavior of the age-hardenable alloy to the alloy chemistry, thermal history as well as deformation temperature, strain, and strain rate by means of a physically based model. Different aging conditions, including supersaturated solid solution and overaging conditions with different deformation parameters, were assessed. Each part of the model was in good agreement with those of experimental and other model... 

The creep deformation behavior of short fiber composites has been studied by an approximate analytical model. A perfect fiber/matrix interfacial bond is assumed and a power law function is considered for describing the steady state creep behavior of the matrix material. The results obtained from the proposed analytical solution satisfy the equilibrium and constitutive creep equations. Also, a parametric study was undertaken to define the effects of geometric parameters on the steady state creep strain rate of short fiber composites. The present model is then validated using the results of finite element method. The predicted strain rate and stress components by the proposed analytical... 

Thermo-mechanical responses, developed microstructure, and mechanical properties in friction stir welding (FSW) of artificially aged AA2017 plates were investigated. A finite element analysis was first employed to evaluate hot deformation behavior of the alloy during welding. Also, hardness, yield strength, and microstructure of the welded alloy were examined using the results of the model and experimental testing. It was found that strain and temperature fields during welding are asymmetrically distributed and the maximum temperature locates in advancing side. Furthermore, considerable grain refinement is observed in the stir zone where recrystallized grains in the range of 3 to 8 m are... 

In this study, artificial neural network (ANN) was used to model the hot deformation behavior of 7075 aluminum alloy during compression test, in the strain rate range of 0.0003-1 s-1 and temperature range of 200-450 C. The inputs of the model were temperature, strain rate, and strain, while the output of the model was the flow stress. The feed-forward back-propagation network with two hidden layers was built and successfully trained at different deformation domains by Levenberg-Marquardt training algorithm. Comparative analysis of the results obtained from the hyperbolic sine, the power law constitutive equations, and the ANN shows that the newly developed ANN model has a better performance... 

The deformation behavior of solid solution-treated AA6061 tubes in a novel severe plastic deformation process named Tube Channel Pressing has been assessed. In order to do so, an analysis based on the finite element method and dislocation density model is utilized, and microhardness measurement is carried out to verify the trends of analysis results. By comparing FEM results with experimental data, the optimized geometrical parameters controlling the deformation behavior of the tube in tube channel pressing are determined to obtain the best strain homogeneity and minimum dimensional changes in tube  

Three deformation routes for recently invented severe plastic deformation (SPD) method named tube channel pressing (TCP) have been introduced in this paper. The effects of routes, back pressure and friction have been investigated on deformation behavior of commercially pure (CP) aluminum tubes. Utilizing finite element analysis provides a broader understanding of these effects through different deformation routes. Due to the large values of strains accumulated in TCP, modified Estrin-Tóth-Molinari-Brechet (METMB) constitutive model has been employed in finite element analysis program to consider a realistic flow stress of the material in TCP. Employing experimental procedures confirms the... 

In this paper the previous velocity field proposed by the authors for the prediction of strain field and deformation load of circular cross section billet in ECAE process has been extended to take into account the deformation behavior of bimetal circular billet in the same process. Accordingly, using Bezier method, as a robust method for determining the geometry of the streamlines, the strain field developed in the circular bimetal billet is calculated. Then, based on the kinematically admissible velocity and strain fields and using the upper bound theorem the ECAE load is predicted. It was found that at constant inner corner angle of ECAE die, with decreasing of outer curve corner the... 

Hot deformation behavior of Al6063 alloy produced by direct powder extrusion was studied by means of uniaxial compression test in the temperature range between 300 and 450°C and strain rate range between 0.01 and 1s -1. Electron backscatter diffraction (EBSD) technique and transmission electron microscopy (TEM) were utilized to study the microstructure of the material before and after the hot deformation. The microstructure of the extruded alloy consisted of elongated grains within a subgrain structure and small grains free of low angle grain boundaries (LAGBs). An equiaxed duplex microstructure consisting of large substructured grains and fine grains separated by high angle grain boundaries... 

The deformation behavior of a 49.8 Ni-50.2 Ti (at pct) alloy was investigated using the hot compression test in the temperature range of 700 °C-1100 °C, and strain rate of 0.001 s-1 to 1 s-1. The hot tensile test of the alloy was also considered to assist explaining the related deformation mechanism within the same temperature range and the strain rate of 0.1 s-1. The processing map of the alloy was developed to evaluate the efficiency of hot deformation and to identify the instability regions of the flow. The peak efficiency of 24-28% was achieved at temperature range of 900 °C-1000 °C, and strain rates higher than 0.01 s -1 in the processing map. The hot ductility and the deformation...