Sharif Digital Repository

In the present study, a novel theoretical model is developed, based on classical laminate theory, to predict the equivalent mechanical properties of the re-entrant lattice structures, which composed of continuous fiber reinforced composite struts. Three main mechanism of stretching, flexing and hinging are considered and a general closed-form formulation is derived to estimate the auxetic honeycomb's elastic and shear modulus as well as Poisson's ratios. In spite of previous studies in which the response of honeycomb structures is modeled using beam theory, here, each strut of unit cell is expressed as a composite laminate with orthotropic mechanical properties and classical laminate theory... 

The evolution of microstructural damage during tensile deformation of pure aluminium reinforced with 10 vol.% alumina short fibres is studied by monitoring the evolution of density and Young's modulus as a function of tensile strain. It is found that Young's modulus drops rapidly until a strain εc ≈ 3%. The composite density remains virtually unchanged in this strain range. At strains above εc, Young's modulus decreases more slowly while the density begins to decrease linearly, indicating void growth in the composite. It is shown that the drop in Young's modulus is linked to fragmentation of fibres aligned along the stress axis, while the decrease in density is related to void opening across... 

In this study, nanostructured biodegradable pure Zn, Zn-4 wt. % Mn and Zn-24 wt % Mn alloys were produced by 20 h mechanical alloying and consequent cold pressing and sintering. Structural evolutions were investigated using the X-ray diffraction technique. Also, the microstructure was characterized by scanning electron microscopy. The effects of alloy composition on density, mechanical properties, corrosion behavior in Hank's solution, cell viability and cell attachment were investigated. Crystallite size of the synthesized alloys after 20 h of milling reached to less than 40 nm and remained less than 80 nm after consolidation and sintering for 1 h. Alloys contain MnZn13 as second phase... 

Cartilage is an avascular tissue with limited self-repair ability. Since the methods for treatment of cartilage defects have not been effective, new therapies based on tissue engineering are considered over the recent years. In this study, human cartilage tissue was decellularized and porous injectable microcarriers (MCs) composed of acellular extracellular matrix (ECM) of cartilage tissue and chitosan (CS), with different ECM weight ratios, were fabricated by electrospraying technique to be used in the treatment of articular cartilage defects. Various properties of ECM/CS MCs such as microstructure, mechanical strength, water uptake behaviour, and biodegradability rate were investigated.... 

Cu-alloyed sintered steels are one of the main product groups in ferrous powder metallurgy (P/M). To expand the application of P/M technology to different sectors of industry and to create new market, it is believed that rapid prototyping and short serial production of sintered parts for functional testing is important. In the present work, rapid prototyping of sintered Fe-C-Cu steel powders by direct metal laser sintering (DMLS) process was studied. Fe, Fe-0.8%C, Fe-2%Cu, Fe-4%Cu, Fe-0.8%C-2%Cu-0.35%P powders were laser sintered in widely varying conditions. The densification and microstructural features of the sintered parts were evaluated. The results revealed that rapid prototyping of... 

The influence of electron beam (EB) irradiation and organoclay (OC) loading on the properties of low-density polyethylene (LDPE)/ethylene-vinyl acetate (EVA) blends was investigated. The samples were subjected to the EB irradiation with the dose values of 50 and 250kGy. X-ray diffraction (XRD), gel content, mechanical, thermal, and electrical properties were utilized to analyze the characteristics of the LDPE/EVA blends with and without OC at different irradiation dosages. Gel content analysis showed that the OC promotes considerably the insoluble part so that the LDPE/EVA blends filled with OC become fully crosslinked at 250kGy; possibly through the formation of further crosslinks between... 

Waste management issue in mining industry has become increasingly important. In this regard, construction of tailings dams plays a major role. Most of the tailings dams require some kinds of remedial actions during their operational lifetime, among which heightening is the most common. In the first stage of the remedial provisions for Sarcheshmeh Copper Complex tailings dam in Iran, it has been decided to use hydrocyclone method to provide suitable construction material due to the high cost associated with using borrow materials for heightening of the dam. To undertake this project a series of laboratory experiments was performed to determine the copper 'original tailings' and 'cycloned... 

Magnesia-dolomite refractories have advantages such as stability in the basic environments, clean steel production, high corrosion resistance, proper covering in the cement furnace, and low production costs. However, their application is restricted due to low hydration resistance. In this research, the effects of nano and micro alumina particles on the microstructure, sintering behavior, and properties of magnesia-dolomite refractories were studied. For this purpose, MgO-CaO refractories were formulated using dolomite and magnetite and 0, 2, 4, 6 and 8 wt percentage nano and micro alumina were added to the formulation. Phase and microstructure analysis of the samples were performed using... 

In the present research, the influence of nanodiamond (ND) and a physical hybrid of ND and fumed nano-SiO2 were investigated on the performance of a typical tire tread compound. The styrene-butadiene rubber (SBR) and cis-butadiene rubber (BR) blend filled with a commercial grade highly dispersive silica at 70 phr loading were used as typical tire tread compound. ND was substituted partially with silica at two different concentrations of 5 and 10phr. Meanwhile, 5 phr of ND/nano-SiO2 hybrids with the weight ratio of 2.5/2.5 and 1/4 were substituted with silica. ND-Filled compounds exhibit increased scorch and cure time compared to controls. Improvement in different characteristics of the... 

Crude oil density is an important thermodynamic property in simulation processes and design of equipment. Using laboratory methods to measure crude oil density is costly and time consuming; thus, predicting the density of crude oil using modeling is cost-effective. In this article, we develop a neural network-based model to predict the density of undersaturated crude oil. We compare our results with previous works and show that our method outperforms them  

We have studied the mechanical properties of a few-layer graphene cantilever (FLGC) using atomic force microscopy (AFM). The mechanical properties of the suspended FLGC over an open hole have been derived from the AFM data. Force displacement curves using the Derjaguin-Müller-Toporov (DMT) and the massless cantilever beam models yield a Young modulus of Ec ∼ 37, Ea ∼ 0.7TPa and a Hamakar constant of ∼ 3 × 10 -18J. The threshold force to shear the FLGC was determined from a breaking force and modeling. In addition, we studied a graphene nanoribbon (GNR), which is a system similar to the FLGC; using density functional theory (DFT). The in-plane Young's modulus for the GNRs were calculated from... 

Artificial Neural Networks (ANNs) have recently been introduced as an efficient artificial intelligence modeling technique for applications involving a large, number of variables, especially with highly nonlinear and complex interactions among input/output variables in a system without any prior knowledge about the nature, of these, interactions. Various types of ANN models are developed and used for different problems. In this paper, an artificial neural network of the feed-forward back-propagation type has been applied for the prediction of density and compressive strength properties of the cement paste portion of concrete mixtures. The mechanical properties of concrete are highly... 

In this study Al2O3-SiC micro/nanocomposites have been fabricated by mixing alumina nanopowders and silicon carbide micro/nanopowders, followed by hot pressing at 1550, 1600, 1650 and 1700°C. The density, mechanical properties and fracture mode of Al2O3-SiC composites containing different volume fractions (2.5%, 5%, 7.5%, 10% and 15%) of micro/nanoscale SiC particles were investigated and compared with those of alumina. The relative density of composites could reach values very close to theoretical density, especially after sintering at 1700°C. However, relative density declined by increasing the SiC fraction at the same sintering temperature. The flexural strength of composites was best for... 

A suction-controlled ring device has been developed to continuously measure the coefficient of lateral soil pressure in deformable unsaturated soil samples from the at-rest to the active condition under application of increasing vertical pressure and controlled matric suction. The device incorporates a thin aluminum specimen ring equipped with horizontal strain gages for recording the lateral soil strains. In addition, a sensor recording water volume changes is utilized to continuously monitor the degree of saturation of the soil sample during tests. The matric suction within the soil texture is controlled using the axis translation technique. In order to verify the performance of the ring... 

Through advanced computational analysis, this work demonstrates that metamaterial structures when made by shape-memory polymers (SMPs) can provide unique intelligent mechanical behavior. For the first time, geometrical effects, pertaining to low and ultra-low densities, on the thermomechanical behavior of SMP-based octet-truss lattice meta-structures are studied in this work. A reliable constitutive thermo-visco-hyperelastic model is applied to analyze the shape-memory behavior of several designed octet-truss lattices with ultra-low and low relative densities, ranging from 0.04 to 0.23. Different compressive strain values are tested to determine the effect of pre-straining. It is concluded... 

In this research, the effects of nano-sized MgO in Al2O 3-SiC composites were investigated. The overall changes in the density and mechanical properties of sintered samples (hardness, bending strength and toughness) were evaluated. After mixing, drying and uniaxial compaction of the powders, they were first heat-treated at low temperature in an electric furnace to remove any residuals. They were then heat-treated at high temperature (1700 °C) inside a graphite furnace in argon atmosphere for sintering (at normal and high pressure). The content of MgO in the Al 2O3-10 vol% SiC composite was 0, 500, 1000, and 1500 ppm. Thefracture toughness(KIC)of sintered composite with 10... 

Graphene nanoplatelets (GNPs) are ideal reinforcements for improving the mechanical properties of aluminum-based matrices due to their outstanding properties. However, it essentially depends on their uniform dispersion in the matrix. In this study, the challenge of uniform dispersion of graphene was performed by functionalizing the non-covalent surface and sonication of GNPs applying non-ionic polymeric ethyl cellulose (EC) surfactant, in which a colloidal mixture was provided with Al powder and graphene, followed by sintering at 620 °C and consolidation. The density and mechanical properties of nanocomposite specimens were investigated and compared with a non-surfactant-assisted Al/GNP... 

Copper matrix composites reinforced with TiO2particles are promising materials widely used as contact materials due to their excellent mechanical and physical properties such as good electrical and thermal conductivity and strength at high temperature. In this research, the novel contact material were prepared by in-situ oxidation of Cu-Ti pre alloyed powders. The morphology of milled powders and microstructure of nano-composite specimens were studied by SEM and TEM. To evaluate mechanical alloying progress of Cu and Ti powders mixture and internal oxidation after Cu2O addition, XRD analysis were carried out. The Physical and mechanical properties results of specimens indicate that the... 

In order to investigate the evolution of microstructure and flow stress during non-isothermal annealing, aluminum samples were subjected to strain magnitudes of 1, 2 and 3 by performing 2, 4 and 6 passes of multi-directional forging. Then, the samples were non-isothermally annealed up to 150, 200, 250, 300 and 350 °C. The evolution of dislocation density and flow stress was studied via modeling of deformation and annealing stages. It was found that 2, 4 and 6 passes multi-directionally forged samples show thermal stability up to temperatures of 250, 250 and 300 °C, respectively. Modeling results and experimental data were compared and a reasonable agreement was observed. It was noticed that... 

The objective of this paper is to study the improvement in the seismic behavior of concrete gravity dams by optimization of concrete mechanical properties. The criteria to measure the improvement have been: 1) reduction in the extent of cracks and 2) increase in the amount of time dams are able to tolerate earthquakes before failure. The mechanical properties considered have included the density and modulus of elasticity of concrete. The Pine Flat Dam has been selected for this numerical study. During a high intensity earthquake, dams enter a nonlinear phase, where the cracks open and close repeatedly. A smeared crack model has been used for simulation of nonlinearity. For the purpose of...