Sharif Digital Repository

In this paper, the hydrodynamic and thermal behavior of a Fe3O4 ferrofluid flow was experimentally investigated inside a cupric u-shaped tube on a horizontal surface, under the effect of a variable magnetic field. The inlet flow regime was laminar and considered under the thermal boundary conditions of the tube with a uniform heat flux, which was affected by the variable magnetic field in some regions. The purpose of the study was to investigate the effect of parameters such as volume fraction of nanoparticles, Reynolds number of the flow, the radius of the curvature, and magnetic field frequency at three levels and four factors in the flow behavior in order to increase the convection heat... 

Purpose: This paper aims to study peroxymonosulfate (PMS) activation in the ultraviolet (UV)/ozone process for toxic cyanide degradation from aqueous solution by a novel and simple method. Design/methodology/approach: Photocatalytic degradation of cyanide (CN-) was carried out using a bench-scale photoreactor. Optimization of the UV/ozone process for the highest removal of cyanide was obtained. The effect of parameters such as ozone concentration, PMS concentration, temperature, cations (Cu2+, Co2+ and Fe2+), cyanide concentration, anions (bicarbonate, carbonate, chloride, nitrite, nitrate and sulfate [SO42−]) and scavengers (ethanol [EtOH], humic acid, TBA and NaN3) was investigated for CN-... 

In this study, collagen/chitosan membrane used for guided bone regeneration (GBR) was modified. Collagen and chitosan are routinely used in GBR membrane fabrication. In addition advanced platelet rich fibrin (A-PRF) is a promising substitution for fabricating membrane in dental surgery. Herein, acid soluble collagen from calf skin was extracted and characterized. The combination of A-PRF with collagen/chitosan membrane was investigated in this study. FTIR analysis revealed that chemical crosslinking using EDC/NHS was occurred. The morphology of collagen/chitosan membrane in a gradient manner of chitosan was assessed via SEM images. Response surface methodology (RSM) was used to... 

Purpose - The purpose of the study is to present a simplified model to replace the complicated foaming simulations for investigating the liquid polyurethane behavior just before solidification. Design/methodology/approach - This model is inspired from the traveling heater method of crystallization because of the low injection velocity. Besides, the heat generated during the reaction is considered as a heat source function in the energy equation. Findings - Various distributions of the heat generation function inside the geometry have been studied to choose the most realistic one. Effect of parameters such as the soil material and porosity on the temperature distribution and flow field are... 

In this paper, a practical educational tool based on Java programming is described. The approach is based on using a fully interactive graphical user interface for teaching cipher algorithms. As an example, a transposition cipher is covered, where students can try different keys and observe the effect of parameters such as key length, choice of letters for the key on the ciphertext. At the same time, the process of breaking the cipher algorithm (cryptanalysis) is rendered possible by students injecting known plaintext. The developed program offers an option where it tries systematically all keys (brute force) to break the cipher. Being extendable, the platform is thought to be able to play a... 

Gas turbine shaft is generally exposed to high temperature gases and may seriously be affected and overheated due to temperature fluctuations in the combustion chamber. Considering vortex flow in the combustion chamber, it may increase the heat release rate and combustion efficiency and also control location of energy release. However, this may result in excess temperature on the combustor equipments and gas turbine shaft. Vortex flow in the vortex engine which is created by the geometry of combustion chamber and conditions of flow field is a bidirectional swirl flow that maintains the chamber wall cool. In this study a new gas turbine combustion chamber implementing a liner around the shaft... 

Resistance spot welding of dissimilar materials especially in different thickness is generally more challenging than that of similar materials due to differences in the physical, chemical and mechanical properties of the base metals. And also when the part is under static and dynamic forces the health of spot-welds is crucial. Hence, the influence of welding parameters such as current, time, applied force and hold time on the shear-tensile load has been investigated in this study. Moreover, in this research the case study is one of the most important body parts of the vehicle which is front wheel house, and effect of above-mentioned parameter on the strength of spot-welds has been... 

TiO2 nanoparticles were prepared by the sol - gel process using 2-hydroxylethy- lammonium formate as an ionic liquid. Nanoparticles were crystallized at various temperatures (300-700°C). The products were characterized using X-ray diffraction (XRD), nitrogen adsorption - desorption isotherms and scanning electron microscopy (SEM) techniques. It was found that the resulting TiO2 nanoparticles had good thermal stability either to resist collapse or the anatase-to-rutile phase transformation during heat treatment. The photocatalytic activity of the nanocrystalline TiO2 was evaluated by the degradation of Acid Blue 92 (AB92) which is commonly used as a textile dye. The results showed that the... 

Hydrodynamic instabilities at the interface of stratified shear layers could occur in various modes and have an important role in the mixing process. In this work, the linear stability analysis in the temporal framework is used to study the stability characteristics of a particle-laden stratified two-layer flow for two different background density profiles: smooth (hyperbolic tangent) and piecewise linear. The effect of parameters, such as bed slope, viscosity, and particle size, on the stability is also considered. The pseudospectral collocation method employing Chebyshev polynomials is used to solve two coupled eigenvalue equations. Based on the results, there are some differences in the... 

Microalgae's biomass productivity and oil content depend heavily on the method of its cultivation. In this study, nutrient removal from municipal wastewater by Chlorella vulgaris in batch culture was investigated. Carbon dioxide was supplied from sodium hydrogen carbonate. Effect of parameters including light intensity, sodium hydrogen carbonate concentration, and daily illumination time on the productivity of biomass and lipid was investigated. Lipid and biomass production of C.vulgaris increased at higher concentration of sodium hydrogen carbonate concentration and higher light intensity until a certain value and then decreased, but longer daily illumination time, increased both biomass... 

A hallmark of more advanced models is their higher details of trunk muscles represented by a larger number of muscles. The question is if in reality we control these muscles individually as independent agents or we control groups of them called "synergy". To address this, we employed a 3-D biomechanical model of the spine with 18 trunk muscles that satisfied equilibrium conditions at L4/5, with different cost functions. The solutions of several 2-D and 3-D tasks were arranged in a data matrix and the synergies were computed by using non-negative matrix factorization (NMF) algorithms. Variance accounted for (VAF) was used to evaluate the number of synergies that emerged by the analysis, which...