Sharif Digital Repository

Owing to wind power inherent characteristics and technical constraints of power systems operation, a considerable amount of wind energy cannot be delivered to load centers and gets curtailed. Transmission congestion together with temporal mismatch between load and available wind power can be accounted as the main reasons for this unpleasant event. This paper aims to concentrate on the wind energy curtailment for which it provides a combinatorial planning model to maximize wind power utilization. Jointly operating the wind power generation system with pumped hydro energy storage (PHES), the planning procedure tries to reach schemes with the minimum level of wind energy curtailment as well as... 

Electric energy storage (EES) installations in power systems are migrating from large centralized systems to more distributed installations for microgrid applications. This trend signifies modular EES installations for the local control of buildings and processes. A centralized EES system is often dispatched by grid operators for increasing the overall efficiency and enhancing the security of power systems. The distributed EES (DEES) is locally managed by aggregators to maximize the local impact of EES, before the aggregators' adjusted load profiles are submitted to grid operators for the day-ahead scheduling. In this paper, we present and analyze two models for the hourly scheduling of... 

In this research, a site selection method for wind-compressed air energy storage (wind-CAES) power plants was developed and Iran was selected as a case study for modeling. The parameters delineated criteria for potential wind development localities for wind-CAES power plant sites. One important consequence of this research was the identification of the wind energy potential for wind-CAES sites. The theoretical wind energy potential of Iran of greater than 50 W/m2 was identified from a wind atlas of Iran. The model produced factor maps by considering the boundary conditions of the input data and created geo-databases from the outputs maps. The main factor maps were electrical grids and... 

Aquifers are underground porous formations containing water. Confined aquifers are the formations surrounded by two impermeable layers, called cap rocks and bed rocks. These aquifers are suitable for seasonal thermal energy storage. In the present study, a confined aquifer was considered to meet the cooling and heating energy needs of a residential complex located in Tehran, Iran. Three different alternatives were analyzed in this aquifer thermal energy storage (ATES), including: using ATES for cooling alone, for cooling and heating, as a heat pump, and for heating alone, employing flat plate solar energy collectors. A numerical simulation, based on the finite difference method, was carried... 

The present study was aimed at performance and energy analysis of a hybrid wind-hydrogen power system. Such system consists of wind turbines, batteries for the short time energy storage, electrolyzer, fuel cell and hydrogen tank for long time energy storage. The proposed configuration is used to supply energy demand of a region with discrete seasonal wind speed regime. Temporary wind energy profiles restrict using batteries for electricity storage as they lose much electrical stored energy for the long time. Based on direct wind turbine usage, batteries and hydrogen storage, different energy supply strategies are introduced and analyzed to power the household electricity demand. The energy... 

DC microgrids (DC-MGs) are becoming popular as an effective means to integrate various renewable energy resources. Conventionally, the droop control is adopted as a decentralized control strategy for proper power sharing without using any communication link. However, the conventional droop control often deteriorates due to the effects of unequal line resistances. In this paper, a control strategy is proposed for a DC-MG to achieve perfect power sharing considering the effects of line resistances. The DC-MG under study consists of a photovoltaic system, two energy storage systems, a grid-connected converter system, and dc loads. The control strategy of the converters is addressed under... 

Energy hub as a super node in electrical distribution level has strong potential to receive energy in various carriers and after convert and store, satisfy hub required demands. On the other hand, CO2 emission and fossil fuels reduction raise up the need for integration of renewable based electricity generation such as wind and solar to energy hubs. In this paper, economical operation of energy hub including, stochastic wind generation, Combined Heat and Power (CHP) unit, boiler, and heat and electricity storages are modelled and analyzed. Responsive loads are used for more flexibility of the studied energy hub. Numerical result is observed through GAMS software to serve a commercial load in... 

In this article, a solar absorption chiller used in MehrAbad region of Tehran, Iran is optimized with exergoeconomic principles and genetic algorithm. After optimizing, a storage system with Phase Change Material technique (PCM) is designed for this optimum configuration for supporting system when sunshine is not received adequately, especially at night. Exergoeconomic analysis is based on finding some ways to improving the performance of a thermal system considering economic constrains. In this study, the exergoeconomic optimization is applied for LiBr-water absorption. The results show that total investment cost of main system, the whole of system except storage system, has increased... 

The emergence and implementation of advanced smart grid technologies will enable enhanced utilization of electric vehicles (EVs) as mobile energy storage devices which can provide system-wide services. With significant penetration of EVs in the near future, the concept, introduced in literature as vehicle to grid (V2G), will be practically possible. The V2G concept eases the integration of renewable energy into power system and gives new force to inevitable move toward power generation by clean energy resources. Therefore utilizing energy storage in EVs is undeniable due to economic and environment benefits. The V2G concept has been the field of many researches in different aspects so far.... 

Magnesium nanopowder (MgNP) of 17 nm average size was produced by planetary ball milling of Mg (φ=229 μm) with 10 wt% NaCl (φ=406 μm) for 50 h. NaCl was omissible by dissolution in saturated KOH. Partial oxidation of MgNP occurred, however, in presence of KOH. MgNP-NaCl mixture was, therefore, used for transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), differential scanning calorimetry (DSC) and Sieverts equilibrium investigation. DSC analysis of ammonium perchlorate showed one endothermic and three exothermic reactions. MgNP did not noticeably affect on the initial endothermic reaction. But it decreased transformation temperatures of the... 

In this work, a method for increasing the storage capability of a solar thermal energy system has been discussed. The system includes two tanks with the flexibility in choosing the best storage medium on the basis of the solar collector's outlet temperature. The results show that using such a hybrid storage system, the storable energy can be increased. Comparing the results with those for simple common storage systems, the extent of improvement was calculated. For verification of the results, a small pilot system was assembled. The test apparatus operated during 2008-2009 cold months and the parameters were recorded. Comparison of the theoretical and experimental results showed a good... 

Using hybrid energy storage system is a method for increasing the storage capability of solar thermal energy. If multiple energy storage devices with complementary performance characteristics are used together, the resulting system will be a 'Hybrid Energy Storage System'. In other words, a Hybrid Energy Storage System (HESS) has several media available for storage at any time. In this way, increase in storable energy is obtained without increasing collectors' area. When there are more than one storage mediums, the system should be able to choose the best medium for storing energy according to the conditions. In the previous works, an optimizer program was used to find the proper medium... 

Effects of the amount and mode of input energy to an active multi-stage solar still were investigated in this work. To control the input energy, an electrical heater controlled by a PLC was utilized to simulate the energy absorbed by solar collectors. The study of the amount of input energy indicated that the freshwater production was a quadratic function of the collector over basin area (CBA) ratio. It was also found that stages 1 to 4 produced about 36%, 26%, 20% and 18% of the overall yield, respectively. Moreover, the effect of employing a thermal energy storage (TES) on the system performance was studied by comparing the mode of feeding energy according to the daily solar radiation...