Sharif Digital Repository

Bioinspired materials can mimic the stem cell environment and modulate stem cell differentiation and proliferation. In this study, biomimetic micro/nanoenvironments were fabricated by cell-imprinted substrates based on mature human keratinocyte morphological templates. The data obtained from atomic force microscopy and field emission scanning electron microscopy revealed that the keratinocyte-cell-imprinted poly(dimethylsiloxane) casting procedure could imitate the surface morphology of the plasma membrane, ranging from the nanoscale to the macroscale, which may provide the required topographical cell fingerprints to induce differentiation. Gene expression levels of the genes analyzed... 

In this study, the influences of different concentrations of SiO 2 nano sized particles in the bath on deposition rate, surface morphology and corrosion behavior of Ni-P-SiO2 Composite coatings were investigated. The deposition rate of coating was influenced by incorporation of SiO2 particles. The microstructure was investigated with field emission scanning electron microscopy (FESEM). The amount of SiO 2 was examined by Energy Dispersive Analysis of X-Ray (EDX) and amount of SiO2 nanoparticles co-deposited reached a maximum value at 4.5 %wt. Corrosion behavior of coated aluminum was evaluated by electrochemical impedance spectroscopy (EIS) and polarization techniques. The results... 

A new strategy for enhancing the efficiency of TiO2 dye-sensitized solar cells (DSSCs) by design of a new double-layer film doped with Zn ions, with various morphologies and phase compositions, is reported. X-ray photoelectron spectroscopy (XPS) revealed that Zn2+ (in the range 0.25-0.1 at.%) was successfully incorporated into the TiO2 lattice without forming secondary phases. X-ray diffraction (XRD) and field emission scanning electron microscope (FE-SEM) analyses showed that the synthesized nanoparticles had nanometer grains with different phase compositions and average crystallite sizes in the range of 8-48 nm, depending upon Zn atomic percentage. UV-vis absorption verified that Zn... 

(ZnO)1-x(CdO)x nanofibers were fabricated via electrospinning of polymer precursor by subsequent annealing in air. Field emission scanning electron microscopy (FESEM) showed the smooth and beadless nanofibers and X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed the ZnO hexagonal and the CdO cubic structure. Diffuse reflectance spectroscopy (DRS) showed the band gap energy reduction by increasing the amount of CdO in (ZnO)1-x(CdO)x nanofibers that resulted in the photocatalytic activity under the visible light for dye degradation. Under the UV light CdO acted as both electron and hole sink in the (ZnO) 1-x(CdO)x nanofibers and a possible photocatalytic activity... 

In this research, nickel thin films have been deposited on Si (1 0 0) substrate using the dc sputtering method. Then, the deposited layers were annealed in different temperatures to oxidize and crystallize the as prepared layers. Scanning electron microscopy (SEM) analysis indicated that the nanorod shape of the nickel oxides has grown on the substrate and x-ray photoelectron spectroscopy determined the formation of stoichiometric NiO on the surface. Field emission (FE) measurements of the NiO nanorods exhibited the lowest turn-on electric field at about 3.8 V μm-1 in the 300 μm vacuum gap. Moreover, the field enhancement factor (β) was measured of about 4109 for this sample. The FE... 

Carbon nanotubes with unique physical and mechanical properties have shown great potential for biological applications, including tissue engineering and mimicking the structure and properties of human bones. In the present work, sol-gel synthesized nanocomposite powder of multi-wall carbon nanotube/hydroxyapatite characterized using field-emission scanning electron microscopy, transmission electron microscope, X-ray diffraction, Fourier transform infra-red spectroscopy and thermal analyses. The results show homogenous dispersion of nanotube in well-crystallized hydroxyapatite ceramic matrix. Scanning electron microscopy and transmission electron microscope observations show the sodium... 

Pure titanium nanoparticles were synthesized by utilizing an Electromagnetic Levitation Melting Gas Condensation (ELM-GC) method. Pure bulk titanium samples were melted and evaporated by electromagnetic levitation technique in an inert gas atmosphere in a silica tube. Titanium nanoparticles were formed from ascending vapor by employing high purity argon and helium as carrier gases and cooling agents. Particle size and morphology of the produced nanoparticles were studied by Field-Emission Scanning Electron Microscopy (FE-SEM) and Dynamic Light Scattering (DLS) analysis. Results showed almost spherical nanoparticles with a narrow size distribution under both cooling atmospheres. The purity of... 

Because of corrosion resistance and antibacterial effects, shape memory Ni-Ti-Ag alloy can be considered for different biomedical applications. Mechanical alloying is used to produce nanostructured Ni-Ti-Ag alloy from elemental powders. X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) are used to characterize the product. Results show that after 1h milling, homogenous distribution of the elements occurs; while no intermetallic compounds is observed. After 3h milling, titanium dissolves in nickel to form amorphous and nanostructured solid phases. Peaks of B2 phase appear in the XRD pattern after the 3h milling of the powder mixture. Sintering of the 3h-milled... 

Titanium anodes coated with noble metal oxides are widely used in chlorate industry. In fact, these anodes are dimensionally stable. In this article, the electrochemical characteristics of the ternary oxide coating created by sol-gel on titanium, which consisted of Ti, Ru and Ir, were investigated in the number of different layers. The electrochemical properties of anodes, morphology of samples, and phase analysis were investigated respectively by cyclic voltammetry and polarization measurements, Field Emission Scanning Electron Microscope (FESEM) and XRD. The result indicated that the application of the more layer number increases the rate of chlorine evolution. Also, The morphology of the... 

In this study, the effect of carboxyl-terminated butadiene-acrylonitrile liquid rubber on fracture toughness of glass-reinforced epoxy composites has been investigated. Fracture toughness tests were conducted in modes I, II and different mixed mode ratios. The data obtained from these tests have been analyzed by using different methods. Results indicated that interlaminar fracture toughness of composite specimens improved considerably through addition of carboxyl-terminated butadiene-acrylonitrile in modes I, II and mixed mode. Interlaminar fracture surfaces of the specimens were also characterized by field emission scanning electron microscope  

Y2 O3:Eu3+ nanostructures with bright red emitting phosphors have been synthesized by the combustion method using water and water/ethanol mixture as solvents. The effect of the solvents on nanostructure and luminescence properties of combustion synthesized Y2 O3:Eu3+ was explored. The synthesized nanostructures were calcined at 400 ° C and 1000 ° C to remove the organic phases and enhance the crystallinity. The crystal structures were characterized by an X-ray diffractometer and the particle size and morphology of the synthesized nanostructures were studies using a field emission scanning electron microscope and a transmission electron microscope. We found that the solvent choice has a... 

Synthesis temperature and purity of perovskite materials are key challenges facing the scientific community. This work aims to address these challenges by developing an innovative low temperature synthesis pathway for preparation of carbonate-free perovskite nanocrystals. The method is based on an ultrasound-Assisted wet chemical processing method. Nanocrystals are characterized and observed by X-ray diffraction (XRD), field-emission scanning electron microscopy and high-resolution transmission electron microscopy techniques. XRD studies show that very fine BaTiO3 nanocrystals (<11 nm) free from any by-products such as BaTi2O5 and BaCO3 are synthesized at 50°C. Moreover, the method developed...