Sharif Digital Repository

Liquid impingement cooling in the form of jet or spray is an appropriate method to remove heat from small surfaces progressively utilized in industry. In this study, numerical simulations are conducted to investigate the effect of surface structure on heat transfer characteristics. Five different three-dimensional structured surfaces are investigated using Euler-Lagrangian approach. The effect of surface structures is discussed on the liquid film thickness, the liquid film velocity, and the heat flux with its uniformity for a given spray and temperature characteristics. The results show that the convective heat transfer strongly depends on both liquid film thickness and velocity. While the... 

The performance of the magnesium fluoride/chromium/gold in-line fiber optic polarizer on the thickness of magnesium fluoride buffer layer and chromium metal thin film was theoretically investigated. To prove the theoretical study, the magnesium fluoride/chromium/gold polarizer was made based on the simulation results. The obtained polarizer showed an extinction ratio of about 40 dB which is in a good agreement with the theoretical result at the corresponding thicknesses. Both theoretical and experimental results showed that by covering the side polished single mode fiber with the optimum layer thicknesses, a novel and an efficient fiber polarizer with the high extinction ratio could be... 

Wettability alteration is the principal low-salinity-effect (LSE) in many oil-brine-rock (OBR) systems. Our recent experimental results have demonstrated that wettability alteration by low salinity is slow. It is expected that the electrical behavior of oil/brine and rock/brine interfaces and the water film geometry control both the transient hydrodynamic pressure, and the time-scale of ionic transport in the film, thus the kinetics and degree of wettability alteration. In this paper, the electro-diffusion process induced by the imposed ionic strength gradient is simulated by solving Poisson-Nernst-Planck equations in a water film bound between two charged surfaces, using a finite... 

Mindlin's (1965) second strain gradient theory due to its competency in capturing the effects of edges, corners, and surfaces is of particular interest. Formulation in this framework, in addition to the usual Lamé constants, requires the knowledge of sixteen additional materials constants. To date, there are no successful experimental techniques for measuring these material parameters which reflect the discrete nature of matter. The present work gives an accurate remedy for the atomistic calculations of these parameters by utilizing the first principles density functional theory (DFT) for the calculations of the atomic force constants combined with an analytical formulation. It will be shown... 

In order to study the heat transfer mechanism and predict the heat transfer capability of a pulsating heat pipe (PHP), a numerical model was used to simulate the oscillating behavior of liquid slug considering liquid film thickness in the evaporator and reduction of liquid film thickness due to evaporation. In this article, thermal performance of an open loop closed end PHP of copper with a diameter of 1 mm and various working fluids including water (DW) and ethanol was investigated. The governing equations of mass, momentum, and energy equations were solved for liquid slug and vapor plugs. The results showed that by considering liquid film thickness behind the liquid slug, for both the... 

In this study, zirconia antistatic coatings were synthesized by a simple dip coating sol-gel route on glass substrates, then applied to polymer-based composites to potentially improve their dust or water repellent capabilities. The coating solution contained a precursor (ZrCl4), solvent (isopropanol) and coupling agent. FTIR spectra confirmed ZrO2 and ZrO compounds in both solution and antistatic coating. FE-SEM images indicated ZrO2 fibers’ thickness was controlled by changing ZrCl4 concentration (150 g–15 g ZrCl4/l) or relative humidity (20%–60%) during coating drying. Fibers grew thicker when decreasing the former or increasing the latter. The surface electrical resistivity for all... 

In this study, the effect of film preparation conditions on the gas permeation properties of polyethylene (PE) and ethylene vinyl acetate (EVA) films (containing 18 and 28wt% vinyl acetate) was investigated. Film blowing and phase inversion methods were applied in the production of PE and EVA films, respectively. The permeation of pure oxygen and carbon dioxide gases was measured at room temperature. The results indicated that with the increase of PE film thickness, permeability and solubility of O2 and CO2 in these films decreased; but the diffusivities of gases through PE films increased. In addition, in the case of EVA copolymers, by increasing the content of vinyl acetate, the... 

Liquid-liquid two-phase flow is capable of boosting heat transfer in microdevices compared to the single-phase and gas-liquid flows. A thorough investigation is performed here to characterize the heat transfer in water-oil flow in a microtube. Finite element method along with the level-set model is employed for numerical simulation. A main part of this paper is devoted to studying the effect of wettability on the heat transfer performance. Four contact angles of 0°, 30°, 150°, and 180° are investigated, which revealed that the contact angle of 150° produces the highest Nusselt number (Nu). Triple points form at this contact angle, and the slugs slide on the wall, which results in more... 

W-doped VO2 films have been synthesized via oxygen annealing of V–W–V (vanadium–tungsten–vanadium) multilayered films. The effects of middle layer’s thickness of V–W–V multilayered film on structure and properties of VOX–WOX–VOX ceramic thin films were investigated. The as-deposited V–W–V multilayered film showed amorphous-like structure when mixed structure of VO2 (M) and VO2 (B) was formed in VOX–WOX–VOX ceramic thin films. Tungsten content of VOX–WOX–VOX ceramic thin films increased with increasing middle layer’s thickness. With increasing middle layer’s thickness, room temperature square resistance (Rsq) of VOX–WOX–VOX ceramic thin films increased from 65 to 86 kΩ/sq. The VOX–WOX–VOX... 

The objective of this study was to construct a novel model to be applied in a general manner to simulate microbial electrochemical cells (MXCs); for both microbial fuel cell (MFC) and microbial electrolysis cell (MEC). The liquid bulk was modeled based on the organic matters degradation to acetate via the anaerobic digestion process. Biofilm simulation was established based upon one-dimensional distribution and the dynamical electron transfer was completed by means of the conduction-based mechanism. We, for the first time, introduced biofilm local potential modeling for MEC simulation with general and simplified linear boundary conditions. The MFC-related part of the model was evaluated... 

In this research, low density polyethylene (LDPE) and poly ethylene-co-vinyl acetate (EVA) were used as polymeric materials. The methods used to produce LDPE and EVA was Film Blowing and ThermalDry Phase Inversion. The amount of permeability, diffusivity and solubility of O2 and CO2 through above polymers were obtained and also the effect of temperature, pressure and film thickness for LDPE was measured. The Barometric method was considered and measurements were based on ASTM standard. To study film cross-section morphology in EVA, Scanning Electron Microscopy (SEM) was applied. From results we considered that the amount of permeability and solubility were decreased by increasing film... 

A simple method for synthesis of NaxWO3 nanowhiskers on tungsten thin films with 40 nm thickness sputtered on soda lime substrate as a source of sodium atoms has been reported for the first time. After heat treatment of the W thin films at 650 °C in N2 ambient for different times (15, 80 and 180 min), crystalline NaxWO3 nanowhiskers with [0 0 1] direction were obtained. scanning electron microscopy (SEM), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS) and optical transmission/reflection measurements were employed to determine various properties of the grown nanowhiskers. Experimental results revealed that size and density of nanowhiskers were dependent on the annealing... 

Antibacterial activity of sol-gel synthesized Ag-TiO2 nanocomposite layer (30nm) deposited on rough anatase (a) TiO2 thin film (~200nm in thickness) was investigated against Escherichia coli bacteria, in dark and also in exposure to UV light. The nanocomposite thin films were transparent with a surface plasmon resonance absorption band at a wavelength of 410nm. The metallic silver nanoparticles with an average diameter of 30nm and fcc crystalline structure were self-accumulated on surface of a mesoporous and aqueous TiO2 layer with a capillary pore structure having a pore radius of 3.0nm. By adding the silver nanoparticles in the TiO2 layer, recombination of the photoexcited electron-hole... 

A mechano-chemical atomic force microscope (AFM) nanolithography on a metallic thin film (50 nm in thickness) covered by a spin-coated soft polymeric mask layer (50-60 nm in thickness) has been introduced. The surface stochastic properties of initial grooves mechanically patterned on the mask layer (grooves before chemical wet-etching) and the lithographed patterns on the metallic thin film (the grooves after chemical wet-etching) have been investigated and compared by using the structure factor, power spectral density, and AFM tip deconvolution analyses. The effective shape of cross section of the before and after etching grooves have been determined by using the tip deconvolution surface... 

A lubrication model is used to study dewetting of an evaporating thin film layer over a solid substrate with a nanometer-scale topography. The effects of the geometry of the topography, the contact angle, the film thickness, and the slippage on the dewetting have been studied. Our results reveal that the evaporation enhances the dewetting process and reduces the depinning time over the topography. Also it is shown that the depinning time is inversely proportional to the slippage and increasing the contact angle may considerably reduce the depinning time, while the film thickness increases the depinning time  

In this paper, the elastic solution to the problem of an isotropic bi-material full-space reinforced by a perfectly bonded thin film across the media interface and subjected to arbitrary asymmetric interfacial loading is addressed. To not include any simplifications, the thin film is first considered as a layer having a finite thickness, and with the aid of Fourier expansion of Muki's potential functions in Hankel transformed space, the formulation of the problem is obtained for a tri-material full-space. Then, knowing that the flexural stiffness of the thin film is negligible, its thickness and shear modulus are assumed to tend to zero and infinity, respectively, such that its in-plane...