Sharif Digital Repository

Optimization of the placement and operational conditions of oil wells plays an important role in the development of the oilfields. Several automatic optimization algorithms have been used by different authors in recent years. However, different optimizers give different results depending on the nature of the problem. In the current study, a comparison between the genetic algorithm and particle swarm optimization algorithms was made to optimize the operational conditions of the injection and production wells and also to optimize the location of the injection wells in a southern Iranian oilfield. The current study was carried out with the principal purpose of evaluating and comparing the... 

Asphaltene deposition during enhanced oil recovery (EOR) processes is one of the most problematic challenges in the petroleum industry, potentially resulting in flow blockage. Our understanding of the deposition mechanism with emphasis on the rate of the asphaltene deposition is still in its infancy and must be developed through a range of experiments and modelling studies. This study aims to investigate the rate of asphaltene deposition through a visual study under different gas injection scenarios. To visualise the asphaltene deposition, a high-pressure setup was designed and constructed, which enables us to record high-quality images of the deposition process over time. Present research... 

To study the gas injection scenario for successful implementation of enhanced oil recovery (EOR)processes, the prediction of interfacial tension (IFT)between injected gas and the crude oil is of paramount significance. In the present study, some intelligent methods were developed for determining IFT values between supercritical CO2 and normal alkanes. IFT was considered as a function of temperature, pressure, and molecular weight of normal alkanes. The developed methods were Multilayer perceptron (MLP), Genetic Algorithm Radial Basis Function (GA-RBF), and Conjugate Hybrid-PSO ANFIS (CHPSO-ANFIS). The average absolute percent relative errors (AAREs)for the stated techniques were found to be... 

Production optimization is defined as the process of maximizing oil production over the long term while minimizing total production costs. The overall goal is to achieve the optimum profitability from the well or field. In this process, the reservoir system can be considered as a multiple input–output system. In this complex system injection and production wells are known as inputs and outputs. The output of the system is often affected by various parameters consisting reservoir conditions, petrophysics, and PVT data. The optimization of the injector rates and number and installation of submersible pumps are the main issues which have been studied in this paper. Determining the factor with... 

Accurate determination of relative permeability (kr) curves and their hysteresis is needed for reliable prediction of the performance of oil and gas reservoirs. A few options (e.g., Carlson, Killough and Jargon models) are available in commercial reservoir simulators to account for hysteresis in kr curves under two-phase flow. Two-phase kr curves are also needed for estimating kr hysteresis under three-phase flow during water-alternating-gas (WAG) injection. Although, most oil reservoirs are mixed-wet, the existing hysteresis predictive approaches have been developed based on water-wet conditions. Experimentally measured data are needed to assess the performance of these methodologies under... 

The results of the minimum miscibility pressure (MMP) determination for miscible injection of CO2 and an associated gas of one of Iranian gas reservoirs into two different oil samples using a slim tube device are presented. For an effective determination of the MMP cell-to-cell slim tube simulation was performed for each case before performing the slim tube experiment and the results were used to determine the pressure intervals in the slim tube experiment. A comparison between the measured MMP values from the slim tube experiments and those calculated by cell-to-cell simulation revealed that the cell-to-cell simulation can be a substitute to slim tube test in cases where time is a primary... 

Particle size distribution (PSD) is an important factor that determines how asphaltene instability can damage porous media during natural depletion and enhanced oil recovery processes. In this work, aggregate size distribution under natural depletion and miscible nitrogen injection processes are determined via image analysis techniques and the results are modelled by population balance equation. Unimodal distribution curves in natural depletion show the dominance of particle-particle aggregation mechanism and the clustering is detected only around crude oil bubble point pressure. It is also observed that miscible nitrogen injection considerably increases the number and size of asphaltene... 

In this work, application of CO2 saturated with silica nanoparticles in continuous/water alternating gas (WAG) injection for heavy oil recovery was investigated which has been rarely attended in the available literature. Core displacement tests were conducted to monitor heavy oil recovery in both continuous and WAG injection schemes. It has been observed that for continuous nano-saturated CO2 injection, the oil recovery is higher than pure CO2 injection. This observation might be explained by alteration of rock wettability to a more water-wet condition. In WAG injection scheme, water breakthrough happened later in nano-saturated CO2 than pure CO2 injection. This delayed water breakthrough... 

The use of water-alternating-gas injection can potentially lead to improved oil recovery from the fields; simultaneous water and gas injection is a form of water-alternating-gas injection. However, there is still an incomplete understanding of these processes and the need for comparative work is inevitable. Core flood experiments and compositional simulations of water-alternating-gas and simultaneous water and gas processes are presented. Immiscible, near miscible, and miscible modes of injection are covered. Matching process is done and optimization of design parameters (injection rate, slug size, water-alternating-gas ratio, and injection gas) is performed. Experimental data demonstrate... 

Multiple contact miscible floods such as injection of relatively inexpensive gases into oil reservoirs are considered as well-established enhanced oil recovery (EOR) techniques for conventional reservoirs. A fundamental factor in the design of gas injection project is the minimum miscibility pressure (MMP), whereas local sweep efficiency from gas injection is very much dependent on the MMP. Slim tube displacements, and rising bubble apparatus (RBA) are two main tests that are used for experimentally determination of MMP but these tests are both costly and time consuming. Hence, searching for quick and accurate mathematical determination of gas-oil MMP is inevitable. The objective of this... 

Crude oil reservoirs have different temperatures, compositions, and pressures, therefore oil recovery performance by CO2 injection varies from one case to another. Furthermore, it is predicted that lower interfacial tension between injected CO2 and reservoir fluid results in more oil recovery. In this study, we investigate the effect of temperature on the equilibrium interfacial tension between CO2 and three different oil fluids at different pressures. Also minimum miscible pressure (MMP) is measured by the vanishing interfacial tension (VIT) technique to determine the temperature effect on the CO2 miscible gas injection. The results on different pure and mixtures of hydrocarbon fluids show... 

CO2 injection is a potentially viable method of enhanced oil recovery for medium oil reservoirs. The authors compare the effect of gas injection strategy (simultaneous water-alternating gas [SWAG], water-alternating gas [WAG], and continuous gas injection [CGI]) on recovery in immiscible, near-miscible, and miscible modes of injection. It has been proved that CGI is not the most efficient injection scenario in oil-wet reservoirs. Miscible and near-miscible core flood tests demonstrated high oil recoveries in all injection strategies due to high capillary numbers achieved as a result of miscibility. The fluid mechanics of floods were discussed using pressure drop data, different mechanics was... 

The objective of this study was to experimentally investigate the performance of water-alternating gas (WAG) injection in one of Iran's oil reservoirs that encountered a severe pressure drop in recent years. Because one of the most appropriate studies to evaluate the reservoir occurs generally on rock cores taken from the reservoir, core samples drilled out of the reservoir's rock matrix were used for alternating injection of water and gas. In the experiments, the fluid system consisted of reservoir dead oil, live oil, Co 2, and synthetic brine; the porous media were a number of carbonate cores chosen from the oilfield from which the oil samples had been taken. All coreflood experiments were... 

Asphaltene precipitation during natural depletion and miscible gas injection is a common problem in oilfields throughout the world. In this work, static precipitation tests are conducted to investigate the effects of pressure, temperature and gas type and concentration on asphaltene instability. Three different oil samples have been studied under reservoir conditions with/without nitrogen and methane injection. Besides applying common thermodynamic models, a new scaling equation is presented to predict asphaltene precipitation under HPHT gas injection. Extensive published data from the literature are also used in model development. The scaling approach is attractive because it is simple and... 

In this study, the main recovery mechanisms behind oil/water/gas interactions during the water-alternating-gas (WAG) injection process, in a network of matrix/fracture, were fundamentally investigated. A visual micromodel was utilized to provide insights into the potential applications of WAG process in fractured oil-wet media as well as the possibility of observing microscopic displacement behavior of fluids in the model. The model was made of an oil-wet facture/matrix network system, comprised of four matrix blocks surrounded with fractures. Different WAG injection scenarios, such as slug arrangements and the effects of fluid injection rates on oil recovery were studied. A new equation... 

This paper investigates the efficiency and performance of several of the fiooding techniques popular in secondary and enhanced oil recovery. These processes include water fiooding, immiscible and miscible gas fiooding, and several forms of water-alternating-gas (WAG) injection. The study is carried out numerically on a typical one-dimensional domain using an advanced high-resolution central scheme. Some performance indices such as oil cut drop, breakthrough time, and sweep efficiency were employed to evaluate the appropriateness of each injection strategy  

Asphaltene instability is one of the major problems in gas injection projects throughout the world. Numerous models have been developed to predict asphaltene precipitation; The scaling equation is an attractive tool because of its simplicity and not involving complex properties of asphaltene. In this work, a new scaling model is presented to account for asphaltene precipitation due to gas injection at reservoir conditions. Extensive published data from literature have been used in model preparation. To check predictive capability of the equation, miscible gas injection experiments are conducted for a southwest Iranian oil reservoir. Experimental results show that methane injection has... 

This work concerns with experimental investigation of CO2 WAG injection to light crude oil in near miscible conditions which has been rarely attended in the available literature. Here, several core flood experiments at three constant injection rates and four WAG ratios are conducted on sandstone rocks saturated with light crude oil in presence of saline water. The results showed that higher injection rate has a better performance regarding oil recovery for smaller PVs of injected fluids, while lower injection rate showed higher ultimate recovery for a 30% increase in injected PVs. Secondary continuous gas injection showed a superior performance than all the other WAG injections in different... 

Immiscible gas injection is one of the most common enhanced oil recovery methods used under various reservoir conditions. In this work, the immiscible recycle gas injection, as an EOR scenario for improving recovery efficiency in one of the south-west Iranian oil reservoirs, is simulated by a commercial simulator, ECLIPSE. The reservoir fluid is light oil, with an API of 43. The oil bearing formations are carbonate, and so a dual porosity/dual permeability behavior was chosen for better representation of the fracture system. Different sensitivity analyses with respect to several parameters like the number and location of injection/production wells, production/injection rate, completion... 

Asphaltene precipitation during natural depletion and miscible gas injection is a common problem in oilfields throughout the world. In this work, static precipitation tests are conducted to investigate effect of pressure, temperature and gas type and concentration on asphaltene instability. Three different oil samples are studied under reservoir conditions with/without nitrogen and methane injection. Besides applying common thermodynamic models, a new scaling equation is presented to predict asphaltene precipitation under HPHT gas injection. Published data from literature are also used in model development. The scaling approach is attractive because it is simple and complex asphaltene...