Sharif Digital Repository

Rotary equipment are being used in many industries over a wide range of applications, such as gas turbine. Due to the nature of the operating conditions, gas turbines are subjected to variety of damages especially crack propagation of a blade. The Cracks propagation may lead to catastrophic failure during operation. Therefore, detection of the crack presence and its propagation is very important and may reduce possible significant cost of the whole system failure. The thesis aims to investigate the cracks presence and their propagation effects on vibration of a turbine blade which is located at the National Iranian South Oilfields. First, theoretical study is calculated to validate an... 

Nowadays a major part of energy, fresh water and sewer water in over the world are transmitted by buried pipe, and always these lines are under the loads and different stresses such as corrosion, earth quick and etc.
In many countries the age of these lines are more than 30 years which causes corrosion of the pipe wall and the necessity of health investigating of transmission lines has a special importance for the governments and leak detection can also keep the natural environment healthyand the costs will come down significantly, scientists and researchers have always tried different ways to check the health of the pipes.
In the field of leak detection and the problems of age... 

Pipeline systems have a major role in civil infrastructure for transportation of energy sources including, petroleum, natural gas, and water. As most pipelines are located in hard-access location such as underground and sea as well as mountains, they are vulnerable to corrosion, cracks and thus, unpredictable failure. Failure of pipelines not only costs millions of dollars but also causes environmental damage, requiring continuous health monitoring systems to provide early detection and early warning of flaws such as corrosion and leaks. Structural health monitoring based on ultrasonic guided waves is used in structures as plates, composites, rods, piping and tubing. This research aims to... 

Structural Health Monitoring (SHM) of pipelines is an important task for economic/safety reasons which depends on the method of study of the integrity profile of the pipeline structure. Process pipes, particularly, pipelines in thermal power plants are susceptible to stress corrosion cracking (SCC). Failure of these pipes may result in catastrophic damages, thus, require systematic regular inspections. The damage assessment may demand embedding of appropriate sensors and specific data analysis techniques. According to what is reported from the respective experiments, data analysis of a single sensor may not be adequate to provide a reasonable damage assessment, and in turn to making a... 

Pipeline systems are one of the cheapest ways for distribution and transportation of petroleum and natural gas. The testing of pipes used in the petroleum industry is necessary to avoid unplanned process interruptions, environmental pollution and provide good safety. One of the methods which is used for pipeline inspection is the ultrasonic non-destructive testing (NDT) technique. The use of conventional NDT techniques such as ultrasonic thickness gauging is a slow inspection process, which becomes very expensive when full inspection is needed. Ultrasonic guided waves provide an appropriate fast screening technique. These waves stress the whole pipe wall and propagate along the length of the... 

Large-size buried pipelines are an efficient way of transporting of water, waste water, sewage, gas, and oil resources in across the world. Since the buried pipe lines are exposed to many unexpected conditions, such as landslides, corrosion, fatigue, unexpected loading, earthquakes, material flaws or even intentional damaging, so the inspection requirements lead to adoption of new method of maintenance, protection and conserving of pipelines. This proposed project aims to improve the trustworthiness, reliable, yet economical technologies for monitoring of behavior of buried pipe lines during operation and assessing the risk of pipe lines failure. Piezoelectric sensor is bonded on the surface... 

Pipelines are the preferred means for transporting of liquid or gas phase materials. The economy of many countries is extremely dependent upon a large network of pipelines systems to transport and distribute the nation’s energy resources. Damages to the pipe structure may cause leakage and result in economic losses or even loss of life. Developing methods for detecting the anomalies and damages to the structure before they lead to catastrophic events is vital. Multiple pipeline misadventures over the past several years have resulted in hundreds of fatalities and billions of dollars in property damages. These accidents demonstrate that the current monitoring methods are not sufficient... 

Structural Health Monitoring (SHM) means to give a diagnosis of the “state” of the subjects. Small leaks along the entire lengths of oil pipelines are detected and located by monitoring.Nowadays health monitoring of pipeline in water, gas, oil and chemical industry has been the focus of researchers. This is due to the fact that leak accidents may cause great economic problems to human resources as well as extreme environmental pollution. This project focuses on a visual and photographic observation system as leakage detection to monitor long range pipelines. In this system, several cameras with overlapping views are located along the entire lengths of pipelines. We are using digital cameras... 

Structural Health Monitoring (SHM) is an effective method for the early detection of structural damage, and this method can reduce the maintenance costs of structures. In this thesis, the use of artificial one-way and multi-layer artificial neural network is evaluated to determine the damage to the structure. The neural network method used in this thesis is a post-propagation method. Finally, the numerically damage determine will be evaluated using a two-dimensional frame structure and a three-dimensional frame structure by finite element method. In this method, the dynamic properties of the structure are used only in the form of the modules. For this purpose, the finite element model is... 

Structural Health Monitoring (SHM) of civil infrastructures is of paramount importance in ensuring the safety and reliability of these structures. SHM involves the use of sensors and data analysis techniques to continuously monitor the structural condition of infrastructure, detect damage or degradation, and provide insights for maintenance and repair. Concrete cracks are one of the most common and critical types of damage in civil infrastructure, which can compromise the structural integrity and safety of the infrastructure if left undetected and untreated. Therefore, the development of effective and efficient crack detection techniques using computer vision and machine learning can... 

The main purpose of this dissertation is to investigate and improve the efficiency of Sparse Reconstruction method for structural health monitoring application in order to solve the challenges including; finding multiple simultaneous damages, damage detection and location in anisotropic structures and real engineering complex structures. The main approach of this research is based on presenting theoretical concepts and developing practical methods based on the presented concepts, as well as evaluating and implementing the developed methods using numerical simulations and experimental tests. In this work, the finite element method is used for numerical simulation. In the experimental test,... 

Reliability evaluation is a key factor in serviceability and safety analysis of air vehicles. Structural health monitoring methods have grown to a degree of maturity in many industries. However, there is a challenging interest to tie in SHM with reliability assessment. In this respect, consideration of stochastic structural dynamics with SHM data and random loadings opens a new chapter in failure prevention. The current study focuses on the stochastic behavior of structures as a way to relate SHM data with reliability. In this respect, uncertain factors such as atmospheric turbulence, structural parameters, and sensor outputs are considered in the process of reliability assessment. Firstly,... 

In this thesis, due to the importance of pressurized structures, method or methods that can be used to monitor the health of important structures, such as pressurized pipes (gas transmission and distribution lines or hydraulic lines), are considered. A key point in monitoring such structures is to ensure the function of pipes, elbows, Tee junctions, composite to composite and composite to metal joints. The topic that will be discussed more than anything else here is to monitor the health of the structure in the presence of cracks in some layers of composite pieces. In fact, it must be recognized before cracking occurs in all layers of composite pieces and causing overall damage to the... 

Today, considering the structural health monitoring system is approximately essential for aerospace structure due to more safety and reduction of maintenance costs. In this manner, aircraft designers and manufactures have recently attempted to usage of the monitoring system on their new products to maintain the superirority of them among the competitors. Furtheremore, installation of these systems on the aircraft will also becom one of the requirements of the aviation regulation in near future which must be complied.The lap joints are one of the major and inevitable components of the metallic airframe structure and the multisite damage such as fatigue cracks are the high probable damages... 

This study presents the best layout with optimal number of sensors for an arbitrary monitoring area based on reference free damage detection and localization. In recent years, damage detection approaches with the concept of instantaneous baseline measurements in Structural Health Monitoring (SHM) with lamb wave propagation are being developed. An array of spars transducers is obligatory in SHM with lamb wave propagation, so that designing the best one is a concern for many researchers. To obtain the best sensors layout, damage localization process should be done for all definable sensors layouts in many different crack positions. Obviously, doing this seems not practical as wave propagation... 

Application of composite patches in repair of damaged/aged aircraft structures is one of the most popular repairing methods in aerospace engineering and because of its advantages the use of this type of repair is increasing today. However, to use these patches in life extension of aged aircraft, the added weight to the structure should be strictly controlled. This could be best done if achieving the optimum and smart design by using optimization and structural health monitoring methods. These two concept about pre-designed of composite patch repair are investigated in this thesis. The simulation by Abaqus software and experimental results and tests will be used for this purpose. In first... 

Interpreting data of infrastructures monitored to detect damage of a structural is one of the most challenging issues of structural health monitoring (SHM). Especially, when environmental factors such as temperature, wind and humidity affect the data and the situation become more complicated. In this study, two methods of analysis free model of moving principal components analysis (MPCA) and robust regression analysis (RRA) have recently been considered for monitoring infrastructures compared with a variety of methods of data interpretation and results are presented. In this study, the performance of different ways in different loading conditions and arrangement of sensors have been... 

Nowadays, the structural health monitoring is considered as an essential element in improving the performance of the structures. The role and importance of the issues in this area have been reached to the point that different ideas and policies are developed for the safety margin over the useful life of the structures. To analyze more accurately, a real model of a turbine blade is required. This issue would be taken into more consideration when the scale of the turbine gets larger. Changing of the design philosophies over time results in effective changes in the design process and maintenance procedures. Any single of these inspections has different importance according to users' demands. In... 

In recent years world countries faced with the ageing aircraft fleet problem which increased the repair and maintenance costs of these aircrafts. The non-destructive inspection methods are common inspection methods of old aircrafts. To do this, the aircraft must test with a certain time scheduled inspection programme in a hangar. This method not only increased the repair and maintenance costs but also affects the flight schedule. To overcome this problem, the structural health monitoring can use to online monitoring the structure and when it needs for repair, the aircraft send to hanger. So, repair and maintenance costs minimize while the flight schedule less affected. One of the structural... 

In presence of epistemic and aleatoric uncertainties of the structural systems, it is better to investigate the events in probabilistic manner. Bayesian inference is an approach that can update the current knowledge of probabilities with new evidence. The main objective of this study was evaluating the advanteges of using Bayesian approach in two main area of structural health monitoring, model calibration and decision making. In each of these two areas, one case study was conducted. First case study was prediction of crack growth life in a pre-cracked aluminum plate and the results showed that using Bayesian approach in calibration of crack growth model and measurement model of health...