Sharif Digital Repository

This work aims to discuss the results of wide ranges of laboratory investigations to evaluate the performance of a newly-formulated surfactant for heavy oil reservoirs in order to improve the microscopic sweep efficiency after water flooding processes. In the first part, the specific behavior of the formulated surfactant including its salinity tolerance, interfacial tension, and optimum performance window was determined. Then, the application of surfactant solutions in real sandstone reservoir rocks was assessed for both oil-wet and water-wet cases. Besides, the effect of changing the capillary and viscous forces and interfacial tension on the residual phase saturations were characterized.... 

In this study, a mixture-based sulfonate-based surfactant with a novel formula capable of functioning in real oil reservoir conditions was prepared and some microscopic parameters, like its compatibility state, emulsion behavior, interfacial tension, and temperature dependency in the presence of a heavy oil sample, and two of the most popular alkalis were analyzed; then the results were compared with those of a commercial sulfate-based surfactant. The designed surfactant provided an optimum three-phase region in relatively high salinity media; however, its optimum value decreased when adding any alkaline materials; this trend was reversed for the solutions made with the sulfate-based... 

Injecting low salinity brines is regarded as an enhanced oil recovery (EOR) process through IFT reduction. However, the exact mechanism behind this process is an unsettled and complex issue that has not been well understood yet, especially for heavy crude oil system. Besides, limited information is available regarding the key heavy oil/brine interfacial tension (IFT). The present study aims to investigate the sensitivity of dead heavy crude oil/brine IFT to a wide range of properties/conditions and to reveal the underlying physicochemical mechanisms involved in enhanced oil recovery and IFT reduction by low salinity water injection into heavy oil reservoir. IFT was measured as a function of... 

Although most heavy oil reservoirs contain discontinuous shaly structures, there is a lack of fundamental understanding how the shaly structures affect the oil recovery efficiency, especially during surfactant flooding to heavy oils. Here, an experimental study was conducted to examine the effect of discontinuous shales on performance of surfactant flooding by introducing heterogeneities to represent streaks of shale in five-spot glass micromodels. Results show that oil recovery in presence of shale streak is lower than in its absence. Based on the authors' observations, the presence of flow barriers causes premature breakthrough of injected fluids and also an unstable displacement front. As... 

This work concerns a fundamental understanding of how heterogeneities induced by flow barriers and connate water affect the displacement efficiency of polymer floods, which has rarely been studied in the available literature. Here, a series of water/polymer injection experiments to heavy oil performed on five-spot glass micromodels containing randomly distributed shale structures is presented. It has been found that macroscopic efficiency of polymer flooding majorly depends on flow barriers distribution/configuration; shale content and geometrical characteristics; presence of connate water and wettability of medium. Microscopic pictures revealed that the main parts of connate water were... 

Finger initiation/development at fluid-fluid interface during miscible floods can cause poor displacement efficiency, which is undesirable in enhanced oil recovery processes. In this work, a series of hydrocarbon injection experiments performed on 5-spot glass micromodels that were initially saturated with the heavy crude oil. The fractured micromodels with different fracture geometrical characteristics were used in the tests. High quality image analysis was applied to determine the fluid flow behavior, solvent front movement, and viscous fingering associated with solvent movement in matrix and fractures. Observations showed that higher solvent dispersion in the fractures rather than matrix... 

It is well known that the displacement efficiency of EOR processes is mainly affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of pores surfaces remains a topic of debate in the literature. Furthermore, a little is known about how the dispersed silica nanoparticles affect the microscopic/macroscopic recovery efficiency of heavy oils during common immiscible EOR processes such as water flooding. In this study, a series of injection experiments was performed on five-spot glass micromodel which is initially saturated with the heavy oil. Distilled water and dispersed silica nanoparticles in water (DSNW) at different values of weight percent... 

Most of the heavy oil reservoirs contain discontinuous shale which affects fluid flow through porous media as well as recovery efficiency during enhanced oil recovery processes. However, the role of shale geometrical characteristics (including orientation, length, discontinuity, and spacing of the shale) on oil recovery remains a topic of debate in the literature, especially during miscible injection of heavy oils and five-spot systems. Here, a series of hydrocarbon solvent injection tests have been performed on various five-spot glass micromodels containing barriers which are initially saturated with heavy oil under fixed flow rate conditions. Oil recoveries as a function of pore volumes of... 

There are different thermodynamic models that have been applied for modelling of asphaltene precipitation caused by various reasons, such as solvent/CO2 injection and pressure depletion. In this work, two computer codes based on two different asphaltene precipitation thermodynamic models-the first being the thermodynamic micellization model with a different characterization approach and the second being the solid model-have been developed and used for predicting asphaltene precipitation data reported in the literature as well as in the obtained data for Sarvak reservoir crude, which is one of the most potentially problematic Iranian heavy oil reserves under gas injection conditions. For the... 

The vapor extraction process (or VAPEX) uses vaporized solvents injected into a horizontal well to form a vapor chamber within the reservoir. Vapor dissolves in the oil and enhances the oil production by decreasing the oil viscosity in heavy oil reservoirs. To evaluate the process we conduct a simulation study on an Iranian heavy oil reservoir called Kuh-e-Mond. In addition, a semi-analytical investigation of the VAPEX process has been performed. The idea is to perform VAPEX simulation for a laboratory model and find a methodology to compare the results of the simulator with the semi-analytical Butler's model. In particular, a semi-analytical dimensionless correlation for production rate... 

Almost all of the heavy oil reservoirs contain discontinuous permeability barriers (shales) with different structures. However, the effect of shaly layer geometrical characteristics including: spacing from wells, discontinuity, orientation, shaly layers' spacing and length, and heterogeneous distribution on oil recovery factor in the presence of gravity force are not well understood. In this work, a series of solvent injection experiments were conducted on various vertical one-quarter five-spot glass micromodels, containing barriers, which were initially saturated with a heavy oil sample. The oil recovery was measured by analysis of the pictures provided continuously during the injection... 

In this work, a thermodynamic approach is used for modeling the phase behavior of asphaltene precipitation. The precipitated asphaltene phase is represented by an improved solid model, and the oil and gas phases are modeled with an equation of state. The Peng-Robinson equation of state (PR-EOS) was used to perform flash calculations. Then, the onset point and the amount of precipitated asphaltene were predicted. A computer code based on the solid model was developed and used for predicting asphaltene precipitation data reported in the literature as well as the experimental data obtained from high-pressure, high-temperature asphaltene precipitation experiments performed on Sarvak reservoir... 

Injecting low salinity brines is regarded as an enhanced oil recovery (EOR) process through IFT reduction. However, the exact mechanism behind this process is an unsettled and complex issue that has not been well understood yet, especially for heavy crude oil system. Besides, limited information is available regarding the key heavy oil/brine interfacial tension (IFT). The present study aims to investigate the sensitivity of dead heavy crude oil/brine IFT to a wide range of properties/conditions and to reveal the underlying physicochemical mechanisms involved in enhanced oil recovery and IFT reduction by low salinity water injection into heavy oil reservoir. IFT was measured as a function of... 

Among various chemical methods, alkaline flooding has a great potential for enhancing heavy oil recovery, especially for reservoirs which contain acidic crude oil. However, fundamental understanding about microscopic displacement mechanisms and macroscopic behavior during alkaline floods at different wettabilities is not well understood, especially in five-spot shaly models. In this work several alkaline floods are performed on a glass micromodel containing randomly distributed shale streaks at different wettability conditions. Various mechanisms responsible for enhancing heavy oil recovery during alkaline flooding are investigated at different wettability conditions. These mechanisms... 

Steam-assisted gravity drainage is one of the most promising strategies to develop huge heavy oil and bitumen accumulations. Like the other thermal processes, this method aims at reducing oil viscosity by increasing the temperature. But in an economical point of view, it requires a great volume of steam for injection. Moreover, early breakthrough of steam and high steam-oil ratio makes it uneconomical, especially in long production time. In this study, a new method, two wells cyclical steam-assisted gravity drainage is compared with a conventional steam-assisted gravity drainage process. Well configuration in two wells cyclical steam-assisted gravity drainage is the same as the... 

Anatase and amorphous TiO2 nanoparticles were used to improve recovery of heavy oil from sandstone cores. Before performing core floods, the stability of nanoparticles at different salinities was tested using ζ potential and ultraviolet-visible (UV-vis) methods. While water recovered only 49% of the oil in the core flood experiments, 0.01% anatase structure solution recovered 80% of the oil after injecting two pore volumes at optimum conditions. To understand the mechanism responsible for improved recovery, contact angle measurements were performed on the rock surface before and after treatment with the nanoparticle solution. Contact angle measurements showed that the rock wettability... 

Asphaltenes are a polydisperse fraction of the crude oil, the phase behavior of which is significantly affected by the changes in pressure, temperature and composition. The focus of this study is to model the polydisperse asphaltenes' precipitation onset condition and the amount of precipitate from solvent-diluted crude oils using the Perturbed Chain form of the Statistical Associating Fluid Theory (PC-SAFT) over a wide range of crude oil density. Heavy oil and bitumen production can involve diluting with paraffinic solvents. Different fractions of the polydisperse asphaltenes thus precipitated are predicted and when compared to the experimental data show a remarkable matching for different... 

A Continuous model was developed to describe the kinetics of hydroconversion of Marlim crude oil in a slurry-phase reactor. The model was able to accurately predict the liquid product distributions as well as coke formation. The model contained one temperature-independent and six temperature-dependent parameters.The model parameters were obtained by an optimization procedure using experimental data available in the open literature for reaction temperatures of 440-460°C, hydrogen pressure of 14.7 MPa, liquid hourly space velocity (LHSV) of 0.5 h-1, and a hydrogen to oil ratio of 100 to 1 ft3/bbl. Comparison between experimental and predicted product distributions and coke yields indicated a... 

In this article a series of experiments were performed to demonstrate the effect of carbon dioxide injection pressure on a huff and puff process. The experimental data are used in a lab-scale model simulated with a commercial simulator to investigate the effect of soaking time, injection pore volume, and rate of injection on the heavy oil recovery. The result of experiments showed that a huff and puff process under miscible pressure conditions gives the most recovery. Simulation results illustrated that there is an optimum value for soaking time, which, for soaking times less than this value, recovery increases and for values greater than optimum the recovery decreases. The simulation study... 

Heavy and extra heavy crude oils usually have a high weight percentage of asphaltene, which could induce many problems during production to refining processes. Also, asphaltene has the main role on the high viscosity of the heavy and extra heavy crude oils. In this paper, the effects of asphaltene characteristics on the crude oil rheological properties have been experimentally and theoretically investigated using different classes of the suspension models. For experimental investigation, the asphaltene was first precipitated from the original heavy crude oil and then 10 well-defined reconstituted heavy oil samples are made by dispersing the asphaltene into the maltene (i.e., deasphalted...