Sharif Digital Repository

The strength of a newly formulated surfactant with an alkali and polymer (AS/ASP) to improve an acidic heavy oil recovery was laboratory evaluated by various flooding experiments. The comparative role of the parameters like chemical nature, surface wettability, salinity, temperature and injection scheme were explored at high temperature and pressure on Berea sandstone rocks. According to the results the anionic surfactant is capable of providing proper oil displacement under high salinity conditions around 15 wt%. Continuous monitoring of differential pressure response and effluents’ state clearly represented the formation of an emulsified oil in high saline solutions with both alkali and... 

In this work, a series of solvent- and water-injection scenarios were conducted on horizontal five-spot glass micromodels that were saturated initially with heavy oil. Sandstone and limestone rock look-alike and network patterns with different pore structures were used in the experiments. The results show that the ultimate oil recovery of a water-alternating-solvent (WAS) scheme was greater than that of a simultaneously water-alternating-solvent (SWAS) scheme, and the efficiency of a solvent-soak scheme also offers a greater recovery. Likewise, the WAS scheme resulted in greater oil recovery when compared with continuous solvent injection (CSI), with the same amount of solvent consumption.... 

The role of emulsions as a prevalent phenomenon is broadly investigated in the petroleum industry since forming the emulsion has many severe harmful implications. Heavy components of crude oil such as wax and asphaltene make the water-in-oil (w/o) emulsion more stable, while the role of these components on the emulsion viscosity has not been fully understood. In this regard, to find a proper demulsifier to break these emulsions, it is necessary to know the mechanisms of emulsion formation by heavy oil components. In this study, the effects of waxy-oil and asphaltenic-oil on w/o emulsion were investigated by measuring volume and viscosity of the formed emulsion after an elapsed time, followed... 

The performance of CO2 injection into a semi-heavy oil reservoir was investigated at reservoir conditions, using highly permeable sandstone in a complete series of PVT tests and coreflooding experiments. Analysis of involved parameters such as: injection rate, injectant type and reservoir pressure were also considered. Oil viscosity reduction and oil swelling are the most influential mechanisms of enhanced oil recovery in this process. The results demonstrated that CO2 injection would decrease the interfacial tension for the high permeable medium in the absence of capillarity, but this reduction may not improve the recovery drastically. One of the main important aspects of this work is the... 

The performance of CO2 injection into a semi-heavy oil reservoir was investigated at reservoir conditions, using highly permeable sandstone in a complete series of PVT tests and coreflooding experiments. Analysis of involved parameters such as: injection rate, injectant type and reservoir pressure were also considered. Oil viscosity reduction and oil swelling are the most influential mechanisms of enhanced oil recovery in this process. The results demonstrated that CO2 injection would decrease the interfacial tension for the high permeable medium in the absence of capillarity, but this reduction may not improve the recovery drastically. One of the main important aspects of this work is the... 

Molecular diffusivity is an essential parameter for modeling of mass transfer in enhanced oil recovery processes. However, experimentally determined diffusivities for light gas-heavy oil systems in the presence of porous media are relatively rare. A few correlations are available in the literature that predict diffusivity of gases into heavy oil in presence of porous media. In this work the pressure-decay method was applied to obtain effective molecular diffusion of CO 2, CH 4 and N 2-heavy oil systems in both bulk and porous media systems at different temperatures. The diffusivity of gases in heavy oil was determined by matching the numerically calculated pressures to the measured data. A... 

Thermal recovery by steam injection has proven to be an effective means of recovering heavy oil. Forecasts of reservoir response to the application of steam are necessary before starting a steam drive project. Thermal numerical models are available to provide forecasts. However, these models are expensive and consume a great deal of computer time. An alternative to numerical modeling is to use a semi-analytical model. The objective of the current study was to investigate thermal applications of horizontal wells for displacement and gravity drainage processes using analytical modeling as well as reservoir simulation. The main novelties presented in the paper are: a) the transient temperature... 

In this work a series of solvent injection experiments was conducted on horizontal glass micromodels at several fixed flow rate conditions. The micromodels were initially saturated with heavy crude oil. The produced oil as a function of injected volume of solvents was measured using image analysis of the continuously provided pictures. In order to investigate the macroscopic behavior of the process in different media, several fractured, with constant width, and nonfractured five-spot micromodels were designed and used. The measured data have also been used for verifying and developing a simulation model that was later used for sensitivity analysis of some parameters that affect oil recovery.... 

In this article a series of experiments were performed to demonstrate the effect of carbon dioxide injection pressure on a huff and puff process. The experimental data are used in a lab-scale model simulated with a commercial simulator to investigate the effect of soaking time, injection pore volume, and rate of injection on the heavy oil recovery. The result of experiments showed that a huff and puff process under miscible pressure conditions gives the most recovery. Simulation results illustrated that there is an optimum value for soaking time, which, for soaking times less than this value, recovery increases and for values greater than optimum the recovery decreases. The simulation study... 

Many oil reservoirs encounter asphaltene precipitation as a major problem during natural production. In spite of numerous experimental studies, the effect of temperature on asphaltene precipitation during pressure depletion at reservoir conditions is still obscure in the literature. To study their asphaltene precipitation behavior at different temperatures, two Iranian light and heavy live oil samples were selected. First, different screening criteria were applied to evaluate asphaltene instability of the selected reservoirs using pressure, volume, and temperature data. Then, a high pressure, high temperature filtration (HPHT) setup was designed to investigate the asphaltene precipitation... 

This work is concerned with the role of geometrical properties of fractures on oil displacement efficiency during solvent injection to heavy oil. Here, a series of solvent injection processes were conducted on one-quarter five-spot fractured micromodels that were initially saturated with the heavy oil, at a fixed flow rate condition. The oil recovery was measured using image analysis of the continuously provided pictures. The results show that for the range of experiments performed here, the maximum oil recovery happens at a fracture orientation angle of 45 degrees. Also, increasing the number of fractures leads to a higher oil recovery factor by solvent in 45 degrees, while it does not... 

The use of polymer flooding as one of enhanced oil recovery methods has recently increased. The occurrence of high shear rates in reservoir and near well bore through perforation nozzles during polymer flooding cause shear degradation of polymers and therefore polymer viscosity has decreased. Rheological behavior of polymer solution in different conditions of oil reservoir is one of the key factors to develop use of polymer solutions. A few researches are available regarding improving rheological behavior of polymeric solution. In this study, to investigate the effect of nanoparticles on rheological behavior of polymer solutions two samples were prepared: polyacrylamide solution in water and... 

Steam injection process has been considered for a long time as an effective method to exploit heavy oil resources. Over the last decades, Steam Assisted Gravity Drainage (SAGD) has been proved as one of the best steam injection methods for recovery of unconventional oil resources. Recently, Fast-SAGD, a modification of the SAGD process, makes use of additional single horizontal wells alongside the SAGD well pair to expand the steam chamber laterally. This method uses fewer wells and reduces the operational cost compared to a SAGD operation requiring paired parallel wells one above the other. The efficiency of this new method in naturally fractured reservoir is not well understood.... 

The Vapour Assisted Petroleum Extraction (VAPEX) process, a newly developed Enhanced Heavy Oil Recovery process, is a promising EOR method for certain conventional non-fractured heavy oil sandstone reservoirs such as those in Canada, but its applicability on low permeable Naturally Fractured Reservoirs (NFR) such as those in the Middle East and Persian Gulf still remained as a question. Previous studies show that the foremost concern for VAPEX application in the case of NFR is the low non-economical production rates. The aim of the present work is to study the effect of fractures geometrical properties such as orientation (vertical or horizontal), density, spacing, location and networking on... 

Steam-assisted gravity drainage is one of the most promising strategies to develop huge heavy oil and bitumen accumulations. Like the other thermal processes, this method aims at reducing oil viscosity by increasing the temperature. But in an economical point of view, it requires a great volume of steam for injection. Moreover, early breakthrough of steam and high steam-oil ratio makes it uneconomical, especially in long production time. In this study, a new method, two wells cyclical steam-assisted gravity drainage is compared with a conventional steam-assisted gravity drainage process. Well configuration in two wells cyclical steam-assisted gravity drainage is the same as the... 

Modeling process is very important and valuable to predict process outcome, especially bioprocesses which are intricate. Because of complex hydrocarbon compounds and oscillations happened in the medium of process, biodegradation of mazut has not already been investigated by mathematical models. In this study, an indigenous bacterium was isolated from oil contaminated soil to investigate biodegradation of mazut at different experimental conditions. Data resulted from mazut degradation, pH, and electrical potential in the medium were recorded. Some reported kinetic models and combinations were investigated to practically model the process. In addition, a new equation that can predict various... 

Refineries are amongst the most energy-intensive and polluting industries in the world. Biotechnology may serve as an alternative low-cost and environmental-friendly tool to the current costly, toxic and hazardous refining processes. In this study, the compositional redistribution of a heavy hydrocarbon cut is investigated under biological conversion using native microbial consortia. The native consortia were obtained by batch enrichment method applied on oil-polluted soil samples from oil refineries of Iran. The bioconversion experiments were conducted with 20% and 40% (v/v) of the heavy cut as the sole carbon source and 10% (v/v) of the consortia broth in 250 ml flasks containing a mineral... 

Characterization of viscous fingering in low tension displacements especially for heavy oil surfactant pair in heterogeneous systems is neither straight forward nor well understood. In this work layered porous models containing fractures with different geometrical properties were used and the finger behavior during displacement of LTNS, as a new EOR agent, in heavy oil was quantified. Dynamic propagation of the fingers independent to the type of heterogeneity is well correlated with the dimensionless displacement time in a linearly form. And also, the rate of finger growth is nearly independent to the type of medium heterogeneity. When injection is scheduled through high permeable region in... 

Many heavy oil reservoirs contain discontinuous shales which act as barriers or baffles to flow. However, there is a lack of fundamental understanding about how the shale geometrical characteristics affect the reservoir performance, especially during polymer flooding of heavy oils. In this study, a series of polymer injection processes have been performed on five-spot glass micromodels with different shale geometrical characteristics that are initially saturated with the heavy oil. The available geological characteristics from one of the Iranian oilfields were considered for the construction of the flow patterns by using a controlled-laser technology. Oil recoveries as a function of pore... 

The concern over fossil energy shortage for the next decade leads to the extensive research activities in the area of enhanced oil recovery. Steam injection as one of well known EOR process has been used for about five decades to improve the oil production rate and recovery efficiency. Steam flooding is applied to heavy and extra-heavy oil reservoirs; however it could be used in light oil reservoirs in which water injection do not work effectively. Regardless of different performances, this method is an efficient EOR process for both heavy and light oil reservoirs. In this work, two separate numerical models were prepared to investigate steam flooding performance for the recovery of light...