Sharif Digital Repository

This thesis is focused on the preparation and use of polysaccharides as extractive phases in various extraction methods, such as the micro solid phase extraction (µ-SPE), needle trap microextraction (NTME) and thin film microextraction (TFME).In the first research, feasibility of the online µ-SPE method using cellulose acetate (CA) fibers was investigated. For this purpose, CA fibers were prepared by electrospinning technique and then placed into µ-SPE cartridge. With this method, it was possible to simultaneously extract the drug compounds in the urine and plasma samples. The enrichment factor and limits of detection (LODs) were obtained in the range of 194-210 and 1.0-2.4 μg L-1,... 

Polymers not just because of their increasing applications in industry but according to their fundamental role in biological mechanisms, has been a topic of interest among different scientific groups. Chemical structure, acroscopic properties and dynamical behavior of these macromolecules are studied in different ways. An important sub-group of polymers are those which according to their chemical properties, after dissolving, release some ions in water and become charged and called polyelectrolytes. A polyelectrolyte with vital importance in our life is DNA which encodes the genetic instructions used in the development and functioning of all known living organisms. One of the main goals in... 

The advent of nanopore-based sensors based on resitive pulse sensing gave rise to a remarkable breakthrough in the detection and characterization of nanoscale species. The sensors can detect the species’concentration, size, and charge using the resistive pulse characteristics. Some strong correlations have been reported between the resitive pulse characteristics and the particle’s geometrical and physical properties. These correlations are commonly used to obtain information about the particles in commercial devices and research setups. The correlations, however, do not consider the simultaneous effect of influential factors such as particle shape, charge, and off-axis translocation, which... 

One of the common methods used for treatment of gaseous radioactive wastes in nuclear waste management is adsorption process. Nanoporous materials have found great utility as sorption media because of their large internal surface area and more adsorption sites than other adsorbents, which caused the increasing attention of researchers to use them in the nuclear waste management. Hence in this study, the surface of nanoporous silicates of SBA-15 and MCM-41 modified with d-block elements of the periodic table such as silver, copper, zinc and nickel by wet impregnation method. After characterization by different techniques such as X-ray diffraction, nitrogen gas porosimetry, Fourier... 

Resistive pulse sensing (RPS) has proved to be a viable method for detection and characterization of micro and nano particles. This method works based on ionic current variation inside nanopores. Modern fabrication methods have introduced different nanopore geometries for resistive pulse sensors therefore studing the effects of geometry on sensing performance of nanaopores is important. Numerical simulation has been used to study a wide variation of nanopore’s geometry configurations and study the physics behind this phenomena. Based on the results, numerical simulation could be used as a fast and easy tool for size determination for nanopore. To compare the sensing performance of different... 

Distinguishing the structure of DNA is of outmost importance in the medicine and agriculture industry nowadays. Various methods have been suggested so far; however, high costs, incorrect results, and time-taking process are among main defects of them. Scientists try to find new ways for recognizing DNA structure and system in order to overcome such problems. One of these new methods is absorbing and passing DNA through Nano-pores in an electrolyte solution under the influence of an electrical field. The basis of this method is the ionized currents which occur due to the passing of DNA through Nano-pores. Because each DNA base pairs can form a barrier corresponding to a unique measured value,... 

Water plays an essential role in the daily lives of humans, plants, and animals. Due to the lack of safe water on the planet, in recent years there have been many challenges in the field of water treatment, which has made water desalination technology always one of the most advanced technologies. The most advanced technology in this field is the use of nanotechnology in water and wastewater treatment, especially the use of Membrane processes such as reverse osmosis. Unlike conventional reverse osmosis membranes, nanoporous membranes can ensure rapid water transfer during the displacement process. The purpose of this thesis is to introduce new monolayers that have an incredible performance in... 

Water treatment from industrial and domestic pollutants is one of the most important issues in recent decades. In the present research, simulation of water purification using single-layer graphene membrane were studied. The effects of nanopores diameter, applied pressure, concentration of contaminant ions, and functional groups on the amount of filtered water and ion rejection through the membrane were quantified. Contaminant ions including Na+, K+, Mg2+, Ca2+, and Cl- were dissolved in water. Based on the results, by increasing the pore diameter and applied pressure, more water would pass through the membrane. Also it was concluded that pores with functional groups have better performance... 

The aim of this research is to model the separation and transport of multi-component gas mixture through a nanoporous membrane by using pore network models (PNM).
The first part of this project represents the membrane simulating by means of the PNM. A three-dimensional network is used to represent the membrane’s pore space and it consists of two parts; pore and throat. The pores are the main parts of the network and their diameter is characterized according to the pore size distribution of the membrane. Every throat connects two pores and the number of throats which is connected to each pore is named "coordination number". Using a variety size of pores and throats leads to production of... 

In this study, deactivation of Midrex reforming catalysts is evaluated kinetically by 3.5-year data of Mobarakeh Steel Company direct reduction site. The variation of Midrex catalyst’s structure is characterized by XRD and BET test. Two deactivation mechanism are characterized, methane cracking carbone deposition and sintering. The project results demonstrate that victorious mechanism is carbon deposition. The methane cracking carbone cause layer by layer deactivation of catalyst during 5.5 months. Although, XRD and BET showed pore volume and radius reduction and Ni crystal increasing, approximated constant activity of catalyst were approved by kinetic evaluation  

Porous thin films have becom very atractive due to their applications in many types of electronic and optical devices. There are several methods for deposition of such films. Chemical method for deposition of nanoporous thin films are relatively simple, but usually hard to control. In this thesis, chemical deposition of thin porous Molybden films is reported. In addition, an available sputtering system has been modified and, controlled porosity thin films were then deposited on glass and silicon substrates using GLAD method.These films have been characerized, and compared with chemically deposited porous thin films  

Polymer translocation through the nanopores is one of the fundamental macromolecular processes in life. Some examples are , mRNA translocation through nuclear pores, injection of DNA from a virus head into a host cell, protein translocation across biological membranes through membrane channels. Also some applications are suggested for the process, e.g. DNA sequencing by probing the signals during the translocation, drug delivery and/or gene therapy. During the translocation the polymer should pass entropic barrier of the pore and it can be facilitated by changing the chemical potential, application of eclectic field, flow field, or chemical concentrations. In electrically driven... 

Translocation processes are ubiquitous in biology and biotechnology. Translocation of small molecules, e. g. sugar from maltoporin, metabolites through bacteria and macromolecules like proteins, from channels of cellular organelles and or RNA translocation though
nuclear pores are of vital importance for cellular metabolism. One of the important applications of translocation processes in biotechnology is to sense translocating macromolecules or small molecules by analyzing the current passing through natural or synthesis channels. Improving our knowledge about this process can also help us to develop new methods for designing the appropriate drugs. In this thesis by studying and... 

The aim of the current research is to study the process of making a solidstate nanopore by molding from PDMS polymer and to make a laboratory sample of a solidstate nanopore manufacturing device using this method. Solid-state nanopores are used to control ion transport in microfluidic channels,lab-on-a-chip detection to study nucleic acids and proteins, desalination, nanofluidic transistors,single-cell sensing tools, and particle classification. In general, the smaller the nanopore, the shorter the length and the higher the mechanical stability, the better the performance. In this research, chips have been made on which there is a blade with a sharpness of 10 nanometers and a height of 10... 

An impedimetric human papilloma virus (HPV) DNA biosensor based on gold nanotubes (AuNTs) in label free detection was materialized. The AuNTs decorated nanoporous polycarbonate (AuNTs-PC) template as biosensor electrode was fabricated by electrodeposition method. The single strand DNA (ss-DNA) probe was covalently immobilized onto the AuNTs-PC electrode. The hybridization of target sequences with the ss-DNA probe was observed by the electrochemical impedance spectroscopy (EIS). The biosensor showed high selectivity and could differentiate between the complementary, mismatch and non-complementary DNA sequences. The EIS measurements were matched to Randle's equivalent circuit. The... 

In recent years carbon nanotubes and other carbon nanostructures such as graphene sheets have attracted a lot of attention due to their unique mechanical, thermal and electrical properties. These structures can be used in desalination of sea water, removal of hazardous substances from water tanks, gases separation, and so on. The nano porous single layer graphene membranes are very efficient for desalinating water due to their very low thickness. In this study, the mechanism of passing water and salt ions through nano porous single-layer graphene membrane are simulated using classical molecular dynamics. In the simulation, in order to separate salt ions from the water, the effects of applied... 

In this projekt, nanophotocatalysts containing metal oxides and oxy-acids based on the nanoporous materials were synthesized. The photocatalytic properties of the prepared samples were evaluated by the photodegradation of day moleculs in photocatalytic systems. The catalytic results revealed that Ag3VO4/Cu-MOF/rGO exhibits noticeably an improvement in both efficiency and rate of AB92 photodegradation in comparison with the pure Ag3VO4. Using different scanning mechanisms for the catalytic properties of the synthesized nanocomposites, it was clearly demonstrated that the anionic superoxide plays a decisive role. Reduction of 4-NP in the presence of NaBH4 was also used to investigate... 

Nanoporous metal-organic frameworks are among the new and advanced compounds that have attracted attention of researchers due to their unique properties such as high surface area, high porosity and regular structure. These compounds can catalyze and degrade pollutants. Due to the high consumption of organic compounds, especially textile dyes, the pollution caused by wastewater is increasing in various industries. Disposal of wastewater containing organic pollutants into aquatic environments can alter the natural color, change the taste of water and disturb the life of living organisms. If the dyes are left untreated in aquatic ecosystems, they can remain in the environment for a very long... 

Poly vinylidene fluoride (PVDF) as a fluorine polymer with acceptable thermal, chemical and physical property attractive create attention in membrane technology for water treatment application. However, with differential surface free energy between PVDF and water (∆G_s=30 mJ/m^2) PVDF polymer is divided as a hydrophobic materials, that is one of the basic problem for PVDF polymer. Due to its hydrophobicity the water molecules repulsion away from hydrophobic PVDF membrane surface as a spontaneous process with an entropy increasing and therefore pollutant molecules with hydrophobic functional group have tendency to adsorb onto membrane surface and dominate the boundary layer. In recent years... 

The aim of this study was to develop a method to determine the trace residual amounts of nonsteroidal anti-inflammatory drugs in meat-related samples and to study the effect of different cooking methods and storage conditions of meat before cooking as an effective factor on the fate of these drugs. To proceed this goal, a nanocomposite was prepared from polycaprolactone nanofiber/silica mesopores as green sorbent by electrospinning. The synthesized nanocomposite was implemented for micro-solid phase extraction of the desired drugs in conjunction with high performance liquid chromatography. Polycaprolactone, due to its excellent physical properties, availability, biodegradability,...