Sharif Digital Repository

Steam injection process has been considered for a long time as an effective method to exploit heavy oil resources. Over the last decades, Steam Assisted Gravity Drainage (SAGD) has been proved as one of the best steam injection methods for recovery of unconventional oil resources. Recently, Fast-SAGD, a modification of the SAGD process, makes use of additional single horizontal wells alongside the SAGD well pair to expand the steam chamber laterally. This method uses fewer wells and reduces the operational cost compared to a SAGD operation requiring paired parallel wells one above the other. The efficiency of this new method in naturally fractured reservoir is not well understood.... 

Asphaltene deposition causes serious problems in the oil industry. Variation of oil composition and reservoir pressure is reported to be the most important factors that influence asphaltene deposition from reservoir oil. In this study, a mathematical model was developed to simulate asphaltene deposition during primary depletion and CO2 injection. The main purpose of this study is to investigate and to compare asphaltene deposition mechanisms due to primary depletion and CO2 injection. The solid model as thermodynamic model was applied to investigate asphaltene precipitation. A numerical model was established to the governing equations both in space and time and model parameters were... 

The effect of operation variables, such as the H2/CO molar feed ratio, gas hourly space velocity (GHSV), temperature, and pressure, on the catalytic performance of the Co/Mn/TiO2 catalyst prepared at the Research Institute of the Petroleum Industry (RIPI) was investigated, and optimum reactor conditions were obtained to produce the maximum amount of light olefins. The catalyst was prepared by co-precipitation of Co and Mn phases in the presence of commercial TiO2 with maximum selectivity for ethylene and propylene production. It was found that the [H2]/[CO]=2/1, space velocity (GHSV) of 1800 h-1, 280°C temperature and 4 bar pressure were optimum operating conditions for the modified catalyst... 

Multi-phase flows, particularly two-phase flows, are widely used in the industries, hence in order to predict flow regime, pressure drop, heat transfer, and phase change, two-phase flows should be studied more precisely. In the petroleum industry, separation of phases such as water from petroleum is done using rotational flow and vortices; thus, the evolution of the vortex in two-phase flow should be considered. One method of separation requires the flow to enter a long tube in a free vortex. Investigating this requires sufficient knowledge of free vortex flow in a tube. The present study examined the evolution of tube-constrained two-phase free vortex using computational fluid dynamics. The... 

Iran's petroleum industry is facing challenges including maturity of hydrocarbon fields, growing population of the nation that demands additional revenues from petroleum exports, and international economic sanctions that have limited access to technology sources. Restrictions from international technology providers have led managers of the industry enterprises to try to develop their needed technologies inside the country. The Ministry of Petroleum has supervised this and as a result, a technology planning systems has been developed and implemented since 2009. In this paper, an overview of the Iranian petroleum industry is provided from a technology planning perspective. The focus has been... 

We describe a general method for analyzing a nonstationary stochastic process X (t) which, unlike many of the previous analysis methods, does not require X (t) to have any scaling feature. The method is used to study the fluctuations in the daily price of oil. It is shown that the returns time series, y (t) =ln [X (t+1) X (t)], is a stationary and Markov process, characterized by a Markov time scale tM. The coefficients of the Kramers-Moyal expansion for the probability density function P (y,t y0, t0) are computed. P (y,t, y0, t0) satisfies a Fokker-Planck equation, which is equivalent to a Langevin equation for y (t) that provides quantitative predictions for the oil price over times that... 

A new innovative 'universal' structural joint with multiple applications was devised. The two major conceived contexts for the use of this joint are 'joining beams to columns, ' and 'joining diagonal braces to horizontal ones. ' The main features of this joint are its high rotational capacity, its high shear deformation capacity, its high energy-dissipation capacity, its ability to contain damage, and its repalceability. Due to its geometry, it can well lend itself to protection measures against fire, normally practiced by the involving industries. This makes it a good candidate for being used in structures related to oil and gas industry, offshore or onshore. Through numerical modelling of... 

In this work, the effect of brine salinity on water-in-oil emulsion flow performance in porous media is studied as it imposes a significant challenge to oil production in the petroleum industry. A crude oil sample from an Iranian oilfield and synthetic brine with different salinities (40-140 g/L salt) are used. The results show that the emulsion viscosity and interfacial tension increase slightly with salinity, while they do not considerably affect the flow behavior. The emulsion stability analysis shows that larger w/o emulsion droplets are formed for higher brine salinity, which potentially block more pore spaces through straining and interception mechanisms. This phenomenon resulted in... 

This review aims to bring together the studies on petroleum reservoirs' sand production control in a comprehensive guide for the researcher to compare various methods for the chemical consolidation of sand. Sand production can be considered one of the major challenges in the petroleum production industry, causing severe operational issues. This study introduces various methods to control and prevent sand production in petroleum wells and evaluates their advantages and performance in tabular form. The use of chemical procedures is considered to be more efficient in counteracting the production and migration of sand. Various chemicals and polymers have been proposed for this purpose. These... 

Using hydrophobic surfaces is one of the efficient methods to preserve energy in fluid transfer systems. However, the studies have been concentrated on Newtonian fluids despite the wide applications of non-Newtonian fluids in daily life and many industries such as the biological, foodstuff, chemical, petroleum, cosmetic, and lab on a chip fields. In this study, we consider power-law fluids as a typical example of non-Newtonian fluids and investigate the effect of hydrophobic microgrooves on the pressure drop in channels by utilizing the phase field method. We demonstrate that the optimum size of the rectangular microgrooves in which the maximum pressure drop reduction (PDR) happens for both... 

Recently production optimization has gained increasing interest in the petroleum industry. The most computationally expensive part of the production optimization process is the evaluation of the objective function performed by a numerical reservoir simulator. Employing surrogate models (a.k.a. proxy models) as a substitute for the reservoir simulator is proposed for alleviating this high computational cost.In this study, a novel approach for constructing adaptive surrogate models with application in production optimization problem is proposed. A dynamic Artificial Neural Networks (ANNs) is employed as the approximation function while the training is performed using an adaptive sampling... 

Wax precipitation may occur in production or transportation of crude oil form field which is a serious problem in petroleum industry. Flow assurance issues concerning wax precipitation make it necessary to develop a precise thermodynamic model to predict the wax appearance temperature and amount of precipitation at different conditions. In this work a new procedure has been proposed to characterize crude oil based on the SARA test considering the wax and asphaltene as single pseudo components. Two scenarios have been investigated for the survey of the crude oil characterization, with and without asphaltene pseudo component. Also, in this work, the Perturbed Chain form of the Statistical... 

In this communication, a hybrid model based on Least Square Support Vector Machine (LSSVM) was constructed to predict CO2 corrosion rate. The input parameters of the model are temperature, CO2 partial pressure, flow velocity and pH. The data used for training and testing of the developed model are 612 and 109 data, respectively. In order to benefit LSSVM from Kernel learning, we compared three kernel functions to select the most efficient one. Furthermore, Coupled Simulated Annealing (CSA) optimization technique was adapted to choose the best optimal values of the model parameters. The results elucidate that Gaussian Kernel functions is the desired function which can afford high accuracy for... 

Asphaltene precipitation is a major assurance problem posing significant technical and economic loss on petroleum industry. To tackle this issue, various treatments have been proposed and applied by industry. Amongst, inhibiting or retarding the asphaltene precipitation has been understood as the most efficient approach. In this regard, blending crude oil with chemical additives could appreciably heighten its stability. Surfactants, owing to amphiphilic nature, could keep asphaltene dissolved in crude oil by precluding self-tendency of those particles to making agglomerates. Despite importance of this subject, there is still lack of sufficient experimental data to evaluate effectiveness of... 

Application of the fiber contained fluids has been extensively increased in many industries. In the petroleum industry, fibrous fluids are utilized for different applications. For instance, they have been applied in drilling operations for hole cleaning and cutting removal. In this article, the results of the studies performed on the application of Hydrated Basil Seeds (HBS) as the herbal eco-friendly fiber on hole cleaning and filtration control were presented. In order to investigate the application of HBS on hole cleaning, Polyacrylamide (PA) was added to the pure water to provide the base fluid and HBS at different concentrations were suspended in the base fluid and the effect of HBS on... 

Asphaltene deposition in porous media, wellbore and surface facilities has been a severe problem in petroleum industry which causes considerable remediation costs annually. Asphaltenes are heavy and polydisperse fractions of crude oil which are insoluble in n-alkanes such as n-heptane. In this work, three Iranian crude oils were prepared for titration experiments with n-pentane, n-heptane and n-dodecane at different solvent ratios and constant temperature. The experimental data were correlated by perturbed chain form of statistical associating fluid theory (PC-SAFT). The association of asphaltene molecules has been considered in this model with adjusting the uncertain parameters (such as... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Preformed particle gels (PPGs) in solutions have been widely used to suppress excess water production in mature oil reservoirs and, in turn, to improve the amount of oil recovery in brown oil fields. In this study, PPG solutions were meticulously formulated and synthesized in order to be utilized in harsh environments in terms of pressure, temperature, pH, and salinity from a free radical polymerization process. In this work, nanosilica gel at different weight percentages was added to improve the mechanical and thermal stability properties of the PPG at harsh condition: high pressure, temperature, and strain. Moreover, the effects of nanosilica gel at various concentrations, ranging from 0.0... 

As expounded, the precipitation and deposition of asphaltene particles in pipelines has been proved to be the most challenging flow assurance problem due to its unknown and complex behaviors. In this work, a new multicomponent, multiphase and dynamic tool was developed to model the aggregation and deposition of asphaltene particles in a bulk medium. The multiphase and dynamic asphaltene deposition tool, shortened as MAD-ADEPT is, in fact, a modified version of the previously developed ADEPT. The new tool was developed to make the asphaltene deposition and aggregation concepts in oil production wells more predictable. To tackle the complexity of the asphaltene problem, a bespoke algorithm was... 

Petroleum industry is moving toward enhancing oil recovery methods, especially water-based methods, including low salinity and smart water flooding which water with an optimized composition is injected into the reservoir for improving oil recovery. Injection of water into the target formation is also a common operation in geothermal energy production. As the water is being injected into the reservoir, pressure and temperature change along the well column and cause scale formation. Mineral scale precipitation and deposition is a common problem for water injection wells which reduces the effective radius of the wellbore and affects the injection efficiency. In this paper, modeling scale...