Sharif Digital Repository

Enhanced oil recovery (EOR) methods are mostly based on different phenomena taking place at the interfaces between fluid–fluid and rock–fluid phases. Over the last decade, carbonated water injection (CWI) has been considered as one of the multi-objective EOR techniques to store CO2 in the hydrocarbon bearing formations as well as improving oil recovery efficiency. During CWI process, as the reservoir pressure declines, the dissolved CO2 in the oil phase evolves and gas nucleation phenomenon would occur. As a result, it can lead to oil saturation restoration and subsequently, oil displacement due to the hysteresis effect. At this condition, CO2 would act as in-situ dissolved gas into the oil... 

The role of emulsions as a prevalent phenomenon is broadly investigated in the petroleum industry since forming the emulsion has many severe harmful implications. Heavy components of crude oil such as wax and asphaltene make the water-in-oil (w/o) emulsion more stable, while the role of these components on the emulsion viscosity has not been fully understood. In this regard, to find a proper demulsifier to break these emulsions, it is necessary to know the mechanisms of emulsion formation by heavy oil components. In this study, the effects of waxy-oil and asphaltenic-oil on w/o emulsion were investigated by measuring volume and viscosity of the formed emulsion after an elapsed time, followed... 

Asphaltene precipitation and deposition causes many serious problems to the petroleum industry from the reservoir to the surface facilities. Therefore, it is important to bring it under control by finding a method to accelerate or slow down its precipitation and deposition. For achieving this purpose two parameters play an important role; onset point of the precipitation and amount of the deposited phase. When asphaltene precipitates, it is capable of depositing in the solution. After the deposition, the solution split into two phases; asphaltene-rich and asphaltene-lean. Determining the amount of the deposited phase needs to distinguish the interface between two phases. In this study, a... 

Wax precipitation may occur in production or transportation of crude oil form field which is a serious problem in petroleum industry. Flow assurance issues concerning wax precipitation make it necessary to develop a precise thermodynamic model to predict the wax appearance temperature and amount of precipitation at different conditions. In this work a new procedure has been proposed to characterize crude oil based on the SARA test considering the wax and asphaltene as single pseudo components. Two scenarios have been investigated for the survey of the crude oil characterization, with and without asphaltene pseudo component. Also, in this work, the Perturbed Chain form of the Statistical... 

As expounded, the precipitation and deposition of asphaltene particles in pipelines has been proved to be the most challenging flow assurance problem due to its unknown and complex behaviors. In this work, a new multicomponent, multiphase and dynamic tool was developed to model the aggregation and deposition of asphaltene particles in a bulk medium. The multiphase and dynamic asphaltene deposition tool, shortened as MAD-ADEPT is, in fact, a modified version of the previously developed ADEPT. The new tool was developed to make the asphaltene deposition and aggregation concepts in oil production wells more predictable. To tackle the complexity of the asphaltene problem, a bespoke algorithm was... 

A new innovative 'universal' structural joint with multiple applications was devised. The two major conceived contexts for the use of this joint are 'joining beams to columns, ' and 'joining diagonal braces to horizontal ones. ' The main features of this joint are its high rotational capacity, its high shear deformation capacity, its high energy-dissipation capacity, its ability to contain damage, and its repalceability. Due to its geometry, it can well lend itself to protection measures against fire, normally practiced by the involving industries. This makes it a good candidate for being used in structures related to oil and gas industry, offshore or onshore. Through numerical modelling of... 

Steam injection process has been considered for a long time as an effective method to exploit heavy oil resources. Over the last decades, Steam Assisted Gravity Drainage (SAGD) has been proved as one of the best steam injection methods for recovery of unconventional oil resources. Recently, Fast-SAGD, a modification of the SAGD process, makes use of additional single horizontal wells alongside the SAGD well pair to expand the steam chamber laterally. This method uses fewer wells and reduces the operational cost compared to a SAGD operation requiring paired parallel wells one above the other. The efficiency of this new method in naturally fractured reservoir is not well understood.... 

Application of the fiber contained fluids has been extensively increased in many industries. In the petroleum industry, fibrous fluids are utilized for different applications. For instance, they have been applied in drilling operations for hole cleaning and cutting removal. In this article, the results of the studies performed on the application of Hydrated Basil Seeds (HBS) as the herbal eco-friendly fiber on hole cleaning and filtration control were presented. In order to investigate the application of HBS on hole cleaning, Polyacrylamide (PA) was added to the pure water to provide the base fluid and HBS at different concentrations were suspended in the base fluid and the effect of HBS on... 

Petroleum industry is moving toward enhancing oil recovery methods, especially water-based methods, including low salinity and smart water flooding which water with an optimized composition is injected into the reservoir for improving oil recovery. Injection of water into the target formation is also a common operation in geothermal energy production. As the water is being injected into the reservoir, pressure and temperature change along the well column and cause scale formation. Mineral scale precipitation and deposition is a common problem for water injection wells which reduces the effective radius of the wellbore and affects the injection efficiency. In this paper, modeling scale... 

This review aims to bring together the studies on petroleum reservoirs' sand production control in a comprehensive guide for the researcher to compare various methods for the chemical consolidation of sand. Sand production can be considered one of the major challenges in the petroleum production industry, causing severe operational issues. This study introduces various methods to control and prevent sand production in petroleum wells and evaluates their advantages and performance in tabular form. The use of chemical procedures is considered to be more efficient in counteracting the production and migration of sand. Various chemicals and polymers have been proposed for this purpose. These... 

Kaolin clay material was loaded with potassium carbonate by impregnation method as a novel, effective, and economically heterogeneous catalyst for biodiesel production of sunflower oil via the transesterification reaction. The structural and chemical properties of the produced catalysts were characterized through several analyses including the X-ray diffraction, scanning electron microscopy, Fourier-transform infrared spectroscopy, and Brunauer–Emmett–Teller specific surface area. These revealed the best catalyst for the investigated reaction among different ones prepared based upon various impregnation extent of the potassium carbonate. The influence of this parameter was examined through a... 

CaO derived from calcined eggshell was doped with Na–K by wet impregnation method and the effect of different Na/K molar ratios was investigated on biodiesel production from canola oil. The catalysts were characterized by X-ray Powder Diffraction (XRD), Brunauer–Emmett–Teller (BET), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), and Thermogravimetric (TGA) analyses. FAME yields were determined by Gas Chromatography-Mass Spectrometry (GC-MS). The Na–K/CaO catalyst with Na/K molar ratio of 1 showed the highest FAME yield of 97.6% at optimum reaction conditions. Structural investigation of materials revealed that FAME yield was proportional to the number of basic sites on... 

Recently production optimization has gained increasing interest in the petroleum industry. The most computationally expensive part of the production optimization process is the evaluation of the objective function performed by a numerical reservoir simulator. Employing surrogate models (a.k.a. proxy models) as a substitute for the reservoir simulator is proposed for alleviating this high computational cost.In this study, a novel approach for constructing adaptive surrogate models with application in production optimization problem is proposed. A dynamic Artificial Neural Networks (ANNs) is employed as the approximation function while the training is performed using an adaptive sampling... 

One of the key open questions in the area of low or controlled salinity water flooding (LSWF or CSWF) is how the observed oil recovery at macro-scale (e.g. Darcy or core-scale) can the explained and what underlying microscopic mechanisms drive it. Thus far, the micromodel investigation of LSWF has been limited to sandstones, remaining challenging to apply to carbonates. In this paper we aim to i) extend the capability to fabricate a novel calcite micromodel using Iceland spar calcite crystal, ii) investigate the pore-scale mechanisms leading to oil recovery from carbonates. A target crude oil-brine-rock (COBR) system was first selected. To screen potential brines which can produce... 

Laboratory experiments have shown that performance of waterflooding in oil reservoirs could be significantly increased by lowering the ionic strength and/or manipulation of its composition, which is generally known as low salinity waterflooding (LSWF). The involved mechanisms in additional oil production can be generally categorized in two categories, fluid/fluid and fluid/rock interactions. The distribution of the phases and the involved displacement mechanisms would be strongly affected by the inter-relations between capillary and viscous forces. Although there have been recent advances in the simulation of the LSWF at core scale and beyond and some models are included in commercial... 

Laboratory experiments have shown that performance of waterflooding in oil reservoirs could be significantly increased by lowering the ionic strength and/or manipulation of its composition, which is generally known as low salinity waterflooding (LSWF). The involved mechanisms in additional oil production can be generally categorized in two categories, fluid/fluid and fluid/rock interactions. The distribution of the phases and the involved displacement mechanisms would be strongly affected by the inter-relations between capillary and viscous forces. Although there have been recent advances in the simulation of the LSWF at core scale and beyond and some models are included in commercial... 

Using network analysis, we investigate if an industry's complex and integrated knowledge base leads to a higher spatial concentration (or dispersal)of innovative activities. This is important because the extant literature provides competing claims about how knowledge base complexity impacts on the spatial distribution of industrial innovation. To help empirically resolve this issue, we draw on longitudinal data (1970–2010)on the upstream petroleum industry and build indexes of entropy and complexity to render knowledge base dynamics, assess the spatial concentration of innovation, and study industry structural transformations. We first find a correlation – once a crucial distinction between... 

Recently, a renewed interest arises in the application of nanotechnology for the upstream petroleum industry. In particular, adding nanoparticles to fluids may drastically benefit enhanced oil recovery (EOR) and improve well drilling, by changing the properties of the fluid, rocks wettability alteration, advanced drag reduction, strengthening the sand consolidation, reducing the interfacial tension and increasing the mobility of the capillary trapped oil. In this study, we focus on roles of clay nano-particles on polymer viscosity. Polymer-flooding schemes for recovering residual oil have been in general less than satisfactory due to loss of chemical components by adsorption on reservoir... 

The effect of operation variables, such as the H2/CO molar feed ratio, gas hourly space velocity (GHSV), temperature, and pressure, on the catalytic performance of the Co/Mn/TiO2 catalyst prepared at the Research Institute of the Petroleum Industry (RIPI) was investigated, and optimum reactor conditions were obtained to produce the maximum amount of light olefins. The catalyst was prepared by co-precipitation of Co and Mn phases in the presence of commercial TiO2 with maximum selectivity for ethylene and propylene production. It was found that the [H2]/[CO]=2/1, space velocity (GHSV) of 1800 h-1, 280°C temperature and 4 bar pressure were optimum operating conditions for the modified catalyst... 

Although being expensive and time-consuming, petroleum industry still is highly reliant on well logging for data acquisition. However, with advancements in data science and AI, methods are being sought to reduce such dependency. In this study, several important well logs, CNL, FDC and PEF from ten wells are predicted based on ML models such as multilinear regression, DNN, DT, RT, GBoost, k-NN, and XGBoost. Before applying these models, depth matching, bad hole correction, de-spiking, and preprocessing of the data, including normalization, are carried out. Three statistical metrics, R2, RMSE, and PAP, are applied to evaluate the models' performance. Results showed that RF, k-NN, and XGBoost...