Sharif Digital Repository

Perovskite solar cells suffer from various instabilities on all time scales. Some of them are driven by light, in particular when employing compounds with mixed halides. Such light soaking effects have been observed to result in performance changes of solar-cell devices. They have also been spectroscopically investigated in detail on films, where the formation of a low-gap iodine-rich phase, seen as a red shift of the PL, has been found to be responsible for a reduced open-circuit voltage. However, studies synchronously examining device performance and its relation to spectroscopy data are scarce. Here, we perform an in operando study, where we investigate the changes of open-circuit voltage... 

Here, the UV photodetection of ZnO rods grown on porous silicon substrates are reported. Laterally interconnected ZnO rods have been synthesized by chemical vapor transport and condensation method on porous silicon substrates. As characterized by current-voltage measurements the I-V characteristics have linear behavior, indicating space charge effect. The device exhibits photocurrent response of 0.027 A/W for 325 nm UV light under -5 V bias. The rise and decay time constants under these conditions are 19 and 62 s, respectively  

In this study, the effects of TiO2 addition on the physical and photoelectrochemical properties of ZnO thin films have been investigated. The (TiO2)x-(ZnO)1-x nanocomposite thin films were dip-coated on both glass and indium tin oxide (ITO)-coated conducting glass substrates with various values of x, specifically 0, 0.05, 0.1, 0.25 and 0.5. Optical properties of the samples were studied by UV-vis spectrophotometry in the range of 300-1100 nm. The optical spectra of the nanocomposite thin films showed high transparency in the visible region. The optical bandgap energy of the (TiO2)x-(ZnO)1-x films increased slightly with increasing values of x. The crystalline structure of the nanocomposite... 

The main purpose of this research work is to investigate the effect of nickel as metal dopant on the morphology and photocatalytic activity of TiO2 nanotube arrays synthesized in the organic electrolyte by anodizing process containing sodium carbonate as an additive (TNAS). In order to characterize the synthesized nanotubes, various analyses such as FESEM, XRD, FTIR, XPS, DRS, and EIS were applied. The results of XPS and FTIR tests evaluate the participation of sodium (Na), nickel (Ni), and carbon (C) in the lattice of nanotubes as dopants. According to the DRS and UV-visible tests results, the band gap energy of TiO2 nanotube arrays decreases from 3.20 to ~ 2.64 eV as well as the absorption... 

Enhancing stability against photocorrosion and improving photocurrent response are the main challenges toward the development of cupric oxide (CuO) based photocathodes for solar-driven hydrogen production. In this paper, stable and efficient CuO-photocathodes have been developed using in situ materials engineering and through gold-palladium (Au-Pd) nanoparticles deposition on the CuO surface. The CuO photocathode exhibits a photocurrent generation of ∼3 mA/cm2 at 0 V v/s RHE. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis and X-ray spectroscopy (XPS) confirm the formation of oxygen-rich (O-rich) CuO film which demonstrates a highly stable photocathode with retained... 

In this work, we study the role of nanotextured ZnFe2O4/Fe2O3composite thin films fabricated by ultrasonic spray pyrolysis (USP) on the photoelectrochemical water oxidation reactions. The ZnFe2O4/Fe2O3 composites with different molar ratios are deposited on three-dimensional nanospikes (NSP) substrate, and the results are compared with those for planar devices. It is observed that optical absorption and charge separation due to larger surface area is significantly enhanced in nanotextured photoactive ZnFe2O4/Fe2O3 films. After characterization of ZnFe2O4/Fe2O3 composite films with different molar ratios (ZF1, ZF2, and ZF3), we find that the nanotextured ZF1 composite with a molar ratio of... 

RGO-α-Fe2O3/β-FeOOH ternary heterostructure composite has been developed as an active photocatalyst for photoelectrochemical water splitting. RGO-α-Fe2O3/β-FeOOH has been successfully synthesized through one-pot hydrothermal-ionic liquid assisted route using tetrabutyl ammonium L-methioninate [TBA][L-Met]and graphene oxide (GO). The electrochemical studies were carried out to demonstrate the oxygen evolution reaction (OER)and photocatalytic activities. The overpotential reduction by rGO-α-Fe2O3/β-FeOOH sample was higher than the nanobean α-Fe2O3/β-FeOOH and pristine α-Fe2O3 samples. The photocurrent density enhanced for rGO-α-Fe2O3/β–FeOOH urchin-like structure and obtained as 0.62 mA·cm−2.... 

We numerically evaluate the effect of a monolayer of resonant-size TiO 2 spheres on the performance of dye-sensitized solar cells (DSCs). This scattering layer is placed between the transparent conducting layer and the dye-sensitized mesoporous TiO2 layer. We carried out our numerical calculations by solving full-wave Maxwell equations in the entire DSC structure using the rigorous coupled-waves approach (RCWA). The layer of TiO2 spheres functions as a strong reflector, leading to strong confinement of the incident light within the absorbing layer of the DSC. The reflectance from this layer originates from coupling of light to the optical resonance modes of the TiO2 spheres. Comparing... 

Enhancing the photoresponse of single-layered semiconductor materials is a challenge for high-performance photodetectors due to atomically thickness and limited quantum efficiency of these devices. Band engineering in heterostructure of transition metal chalcogenides (TMDs) can sort out part of this challenge. Here, we address this issue by utilizing the plasmonics phenomenon to enrich the optoelectronics property of the WSe2/MoS2 heterojunction and further enhancement of photoresponse. The introduced approach presents a contamination-free, tunable and efficient way to improve light interactions with heterojunction devices. The results showed a 3600-fold enhancement in photoresponsivity and... 

Providing solar hydrogen as a clean energy resource is one of the human challenges for future. Controlling oxygen vacancies as well as surface morphology in metal oxide semiconductors enables developing PEC H2production in some understood ways. Here, the influence of simple change in annealing atmosphere, air and pure oxygen, on photoresponse of nanocrystalline WO3has been studied completely. Results revealed that such slight change in annealing procedure increases effective surface interface and donor density by 77 and 72%, respectively. These effects and also retarding recombination of photogenerated electro-hole pair resulted in photocurrent enhancement under solar like illumination more... 

WO3 thin films were fabricated by sol-gel method using polyethylene glycol (PEG) as dispersing agent. Physical and photoelectrochemical properties of the synthesized nanocrystalline films were studied by varying weight ratio of PEG to tungsten precursor (x). Based on AFM observations and statistical modeling of the WO3 surface, the thickness of the films increased by increasing the amount of x with a nearly linear fashion while the surface roughness reached to a saturated value. However, the film synthesized with x = 4 showed a chaotic surface behavior. Optical analysis revealed that by increasing the x, transmittance of the films decreased while their band gap energies remained unchanged.... 

The cost-effective, robust, and efficient electrocatalysts for photoelectrochemical (PEC) water-splitting has been extensively studied over the past decade to address a solution for the energy crisis. The interesting physicochemical properties of CuO have introduced this promising photocathodic material among the few photocatalysts with a narrow bandgap. This photocatalyst has a high activity for the PEC hydrogen evolution reaction (HER) under simulated sunlight irradiation. Here, the recent advancements of CuO-based photoelectrodes, including undoped CuO, doped CuO, and CuO composites, in the PEC water-splitting field, are comprehensively studied. Moreover, the synthesis methods,... 

In this study, initially graphene quantum dots (GQDs) were synthesized by an electrochemical technique and hierarchical porous TiO2 were made by a sol – gel method. Subsequently, GQDs/hierarchical porous TiO2 nanocomposites were prepared by two different methods for the purpose of comparison: spin coating (SC) and electrophoretic (EP) deposition. The GQDs/hierarchical porous TiO2 nanocomposites were characterized by various analytical methods including field emission scanning electron microscopy, atomic force microscopy, transmission electron microscopy, high resolution transmission electron microscopy, Fourier transform infra-red spectroscopy, photoluminescence spectroscopy and... 

TiO2 thin films containing different concentrations of Ag nanoparticles have been synthesized by sol-gel method. According to UV-visible spectra, presence of an intense surface plasmon resonance peak at 490 nm of wavelength indicated formation of silver nanoparticles in the TiO2 films. Based on atomic force microscopy (AFM) analysis, the surface roughness and the effective surface ratio increased by increasing the Ag mol%. Moreover, scanning electron microscopy (SEM) images showed formation of Ag nanoparticles on the surface for the samples containing high Ag concentration. X-ray diffraction (XRD) patterns revealed that the size of Ag nanocrystals increased by increasing the Ag content in... 

Free-standing TiO2 nanotube array (TNA) films were fabricated via two-step anodization of a titanium sheet. The X-ray diffraction pattern indicated amorphous TNAs were transformed into anatase after annealing the films at 500 °C in air. The surface of TNA was modified by a sequential-chemical bath deposition (S-CBD) method to fabricate Ag2S nanoparticles and forming TNA/Ag2S-n nanostructure, by varying the number of cycles (n). Based on SEM observations, the produced films consisted of vertically ordered tubular structure arrays, each with 125 nm in diameter and 4.1 μm in length containing silver sulphide nanoparticles of ∼12 nm diameter. X-Ray photoelectron spectroscopy (XPS) confirmed the... 

Hematite is recognized as a promising photoanode for photoelectrochemical water oxidation to produce solar hydrogen due to its favorable properties. However, the high charge carrier recombination rate due to low electrical conductivity and sluggish oxygen reduction kinetics of pure hematite hinder its photocatalytic activity. This work proposed a new hematite-based heterostructure of Ti-Fe2O3/Fe2TiO5/FeOOH, synthesized through a hydrothermal method. The photoanode morphology was branched nanorods that expanded their surface area and improved charge transfer at the photoanode/electrolyte interface. In a novel and complement modification approach, a thin pseudobrookite interlayer was applied... 

We demonstrate for the first time the application of p-NiFe2O4/n-Fe2O3 composite thin films as anode materials for light-assisted electrolysis of water. The p-NiFe2O4/n-Fe2O3 composite thin films were deposited on planar fluorinated tin oxide (FTO)-coated glass as well as on 3D array of nanospike (NSP) substrates. The effect of substrate (planar FTO and 3D-NSP) and percentage change of each component (i.e., NiFe2O4 and Fe2O3) of composite was studied on photoelectrochemical (PEC) water oxidation reaction. This work also includes the performance comparison of p-NiFe2O4/n-Fe2O3 composite (planar and NSP) devices with pure hematite for PEC water oxidation. Overall, the nanostructured... 

Here in this study, successful conversion of visible light into electricity has been achieved through utilizing microalgal pigments as a sensitizer of nanostructured photo-electrode of dye-sensitized solar cells (DSSCs). For the first time, photosynthetic pigments extracted from microalgae grown in wastewater is employed to imitate photosynthesis process in bio-molecule-sensitized solar cells. Two designs of photoanode were employed: 10μm nanoparticular TiO2 electrode and 20μm long self-ordered, vertically oriented nanotube arrays of titanium dioxide films. Microalgal photosynthetic pigments are loaded on nanostructured electrodes and their photovoltaic performances have been investigated.... 

WO3 thin film photoanodes containing different concentrations of Ag nanoparticles were synthesized by solegel method. Based on UV-visible spectra, presence of a surface plasmon resonance peak at 470 nm of wavelength indicated formation of silver nanoparticles in the WO3 films. According to atomic force microscopy (AFM) analysis, the highest value for surface roughness and the effective surface ratio was observed for the sample containing 2 mol% of Ag. X-ray diffraction (XRD) patterns revealed that WO 3 nanocrystalline structure was formed in the monoclinic phase with the average size of about 18.2 nm while Ag nanocrystals were determined in cubic phase. X-ray photoelectron spectroscopy (XPS)... 

In this study, titanium dioxide (TiO2) nanotube array (TNA) films are fabricated via anodization of titanium (Ti) sheet. After annealing, the films consisted of well ordered, vertically oriented TNAs of 125±6nm diameter, 38±3nm wall thickness, and 2.9±0.3μm in length. Cadmium sulfide (CdS) nanoparticles are deposited on the synthesized TNAs by sequential-chemical bath deposition (S-CBD) method with different immersion cycle (n) to produce heterogeneous TNA/CdS-n (n=10, 20 and 30) nanostructures. UV-visible absorption spectra of the samples revealed that the absorption edge of CdS modified TNAs was shifted to a higher wavelength with respect to the pure TNAs indicating band gap reduction of...