Sharif Digital Repository

PVDF (polyvinylidene fluoride) magnetic nanocomposite films were prepared by solution casting using two types of nanomagnetic particles: (i) magnetic nanoparticles synthesized by using an alkaline solution of mixed ferrous/ferric salts along with oleic acid as a coating agent at 70˚C; (ii) Fe3O4 nanoparticles prepared by hydrolysis of aqueous solution of ferrous/ferric salts with potassium hydroxide at room temprature. Scanning electron microscopy (SEM) showed that the PVDF magnetic nanocomposite had a porous structure with Fe3O4 nanoparticles dispersed inside the porous polymer matrix. The presence of crystalline magnetite within the polymer matrix was confirmed by X-Ray diffraction method... 

Poly (vinylidene Fluoride) (PVDF)/organoclay nanocomposite films were prepared via melt mixing, solution casting and Co-precipitation techniques. The effects of different kinds of nanoclay, sample preparation techniques and electron beam irradiation on PVDF/Nanoclay nanocomposite are reported in this research project. Differential scanning calorimetry was used to study thermal properties and crystallinity of the PVDF and its nanocomposites. The chemical and crystalline structure of the samples was analysed by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) and the mechanical properties of the PVDF nanocomposite were characterized by stress strain test. The degree of... 

Composite film PLA/PVDF and nanocomposite films PLA/PVDF/MWCNT with a solution method by solvent Dimethyl formamide was prepared at 65◦c. poly vinylidene fluoride as matrix phase and poly lacticacid was used an amplifier. In the next sextion multiwalled carbon nanotubes were added to the PLA/PVDF composite.Scaning Electron microscope results, showed that the PLA/PVDF composite and PLA/PVDF/MWCNT nanocomposites, non porous structure and carbon nanotubes in the polymer matrix have been well dispersed. The impact of nanoparticles in the polymer matrix by X-Ray Diffraction and Differential Scaning Calorimetry was investigated. With differential scaning calorimeter (DSC) and stress strain test,... 

In this study, modification of Polyvinylidene fluoride membrane in order to reduce membrane fouling in membrane bioreactors is investiged. To achieve this goal, chemical modification and grafting methods were used. Initially, by chemical modification, the reaction was made to make hydroxyl groups on the membrane surface. The hydroxyl functional groups were used as a site for connecting of subsequent monomers. Finally, the lysozyme enzyme was used as the main modifier to improve the hydrophilicity and antibacterial properties of the membrane surface. To evaluate the performance of the modified membrane in comparison with the pristine membrane, different tests, such as water contact angle... 

Many aroma compounds of fruit juice recovered by thermal evaporation and distillation processes can lead to undesirable chemical changes and even their loss. Pervaporation is a promising process for the recovery of volatile organic compounds from their aqueous solutions. In the present work, pervaporation recovery of Ethyl acetate as a model solution of apple juice’s aroma compound was evaluated with polyvinylidene fluoride (PVDF) and ethylvinylacetate (EVA) membranes. For PVDF and PES membranes in the feed concentration of 250-1000 ppm and the operating temperature of 30 ºC, separating factor , respectively, was obtained in the range of 67-70 and 49-53, and also total permeation flux was... 

Treatment of landfill leachate with membrane bioreactor (MBR) in lab and pilot scale have been studied in this research. MBR biological adaptation procedure at start of biological treatment, choose of membrane materials, membrane production with highest treatment performance and lowest membrane foaling have been studied. Mixed liquor suspended solid of MBR at the start of adaptation period was 3000 ppm and at the end of this period became 7000 ppm, microbial community has been changed in this period. Number of microbial species were reduced and number of these adapted species were increased. Five membranes were prepared with different concentration of PVDF polymer, solvent and non-solvent to... 

Today, presence of micropollutants, including pharmaceutical compounds, in aquatic systems has turned into a major environmental challenge threatening the health of humans and many aquatic and terrestrial organisms. In the recent years, biodegradation of pharmaceuticals using enzymes, such as laccase, has been presented as a green method for eliminating these types of pollutants. Furthermore, regarding the improved stability and reusability of immobilized enzymes, these types of biocatalysts are suitable for industrial applications. Enzymatic membrane reactor is a promising method of enzymatic treatment and fabrication of a high-efficiency enzymatic membrane is a major step to begin this... 

Neural system in human body due to limitated cell proliferation requires high care, because the damage causes serious hurts and disables different tissues. Limit regeneration in central neural system can cause different neural diseases including brain exhaustions specially in old people, but the peripheral neural system may have been disabled and intrupt some other tissue beacuase of possible external injuries before aging. So that while some damages like neural fibers severing, some new medical care methods are required. Some of these methods are outograft, allograft and xenograft which implants neural tissues either between other patient's tissues or from somebody else's; however these... 

Polymer electrolytes are most frequently used electrolytes especially in lithium ion batteries. The gel-polymer and polymer-ceramic electrolytes were synthesized using DMA plasticizer, LiClO4, and SiO2 ceramic Nano fillers through coating method. EIS, FTIR, XRD, SEM, and TGA analyses were carried out on electrolytes. The optimum amount of perchlorate and polymer was obtained 0.5 M and 5% w/w, respectively. Also, the optimum amount of silica was obtained 2% w/w. the optimizations were carried out suing conductometry. The EIS analysis showed the ionic conductance of gel-polymer 1.8 mS.cm-1 while that of ceramic-polymer was obtained 2.8 mS.cm-1  

Many efforts have been performed on the poly(vinylidene fluoride), PVDF, due to its piezoelectric, pyroelectric and ferroelectric potentials. In this thesis Poly (vinyldene Flouride) (PVDF)/Poly (vinyl Asetate) (PVAc)/Multi-walled carbon nanotubes (MWCNT) and Poly (vinyldene Flouride) (PVDF)/Poly (vinyl Asetate) (PVAc)/Graphene Oxide nonasheets (GOn) nanocomposite films were prepared via solution casting method. The effect of concentration of PVAc, MWCNT and graphene oxide on PVDF nanocomposites were investigated. Graphene oxides synthesized by modified Hummer’s method. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results showed that the crystalline structure of... 

Structural Health Monitoring (SHM) of pipelines is an important task for economic/safety reasons which depends on the method of study of the integrity profile of the pipeline structure. Process pipes, particularly, pipelines in thermal power plants are susceptible to stress corrosion cracking (SCC). Failure of these pipes may result in catastrophic damages, thus, require systematic regular inspections. The damage assessment may demand embedding of appropriate sensors and specific data analysis techniques. According to what is reported from the respective experiments, data analysis of a single sensor may not be adequate to provide a reasonable damage assessment, and in turn to making a... 

increased cohesion up to 4H pencil. Results of immersion test in water showed stability of coatings. Polarization test in naphtha and water mixture for stainless steel, copper and aluminum meshes demonstrated 98.89%, 86.25% and 66.6% protection efficiency respectively. In order to study of oil and water separation efficiency, mixtures of water and naphtha with different content of naphtha were used. Separation test for 200μm St.St mesh in different slopes demonstrated that changing of slop increase separation efficiency up to 95.5% for water and up to 100% for naphtha. Separation test for meshes with different pore size demonstrated that meshes with small pore size are more appropriate for... 

Poly vinylidene fluoride (PVDF) as a fluorine polymer with acceptable thermal, chemical and physical property attractive create attention in membrane technology for water treatment application. However, with differential surface free energy between PVDF and water (∆G_s=30 mJ/m^2) PVDF polymer is divided as a hydrophobic materials, that is one of the basic problem for PVDF polymer. Due to its hydrophobicity the water molecules repulsion away from hydrophobic PVDF membrane surface as a spontaneous process with an entropy increasing and therefore pollutant molecules with hydrophobic functional group have tendency to adsorb onto membrane surface and dominate the boundary layer. In recent years... 

In this study, membrane distillation process was used for treatment of high salinity waters. The focus of this study is to simulate and build a setup of membrane distillation process. Since the membrane distillation process is based on the driving force of the temperature difference, the required temperature is provided by both the use of heaters and the use of solar energy. To increase the feed temperature by solar energy, a black polymer coating on the main membrane is used. The main membrane used in this process is PVDF polymer and the polymer coated on the surface is the PAN polymer. After simulating and constructing the laboratory setup, the influence of a variety of parameters on the...