Sharif Digital Repository

Heterogeneity is one of the challenges in the current NoC design which forces designers to consider irregular topologies. Therefore, finding an optimal topology with minimum cost (minimum use of links, buffers, NIs, etc) and power consumption, and maximum flexibility can provide the best cost-performance trade-off. Irregular mesh is a topology which combines the benefits of regularity and advantage of irregularity. Routing algorithms especially those coupled with wormhole switching should deal with deadlock occurrences. Unlike deadlock avoidance-based schemes, deadlock detection and recovery-based routing schemes, do not restrict routing adaptability. In this paper, we modify irregular mesh... 

This work aims to discuss the results of wide ranges of laboratory investigations to evaluate the performance of a newly-formulated surfactant for heavy oil reservoirs in order to improve the microscopic sweep efficiency after water flooding processes. In the first part, the specific behavior of the formulated surfactant including its salinity tolerance, interfacial tension, and optimum performance window was determined. Then, the application of surfactant solutions in real sandstone reservoir rocks was assessed for both oil-wet and water-wet cases. Besides, the effect of changing the capillary and viscous forces and interfacial tension on the residual phase saturations were characterized.... 

The discrete fracture network (DFN) and Multiple-Continua concept are among the most widely used methods to model naturally fractured reservoirs. Each faces specific limitations. The recently introduced recovery curve method (RCM) is believed to be a compromise between these two current methods. In this method the recovery curves are used to determine the amount of mass exchanges between the matrix and fracture mediums. Two recovery curves are assigned for each simulation cell, one curve for gas displacement in the presence of the gravity drainage mechanism, and another for water displacement in the case of the occurrence of the imbibition mechanism. These curves describe matrix-fracture... 

In this work, a newly formulated sulfonate-based surfactant and two other commercial sulfate-based surfactants with the capability of tolerating harsh underground reservoir conditions, such as high-saline formation water and high temperature, were prepared. Sodium metaborate as an effective alkali compound was also used to provide alkali-surfactant combination. Interfacial tension (IFT) measurements as well as wettability examinations for different salinities and mixture conditions were performed for an extended range of the chemical concentrations. The wettability tests including both contact angle measurements and Amott cell tests were performed on saturated Berea sandstone plug samples... 

In recent years, polysilicon nanoparticles are used to enhance the oil recovery through the water injection process in oilfields. The contributing mechanisms are the reduction of interfacial tension and wettability alteration which lead to improving or decreasing the oil phase relative permeability and can be traced by change of relative permeability curves. However, profound understanding of the effect of dispersed nano-silica particles on the hysteretic behavior of relative permeability curves remains a controversy topic in the literature.The current study illustrates the influence of dispersed silica particles on hysteretic trend of two-phase curves of oil-water relative permeability.... 

Nitrogen has emerged as a competitive gas injection alternative for gas-based enhanced oil recovery processes in the past two decades. The injection of nitrogen into the reservoirs has improved the oil recovery efficiency in various oil reservoirs from heavy to volatile oils. As it is known, interfacial tension (IFT) plays a key role in any enhanced oil recovery process, particularly gas injection processes; therefore, its accurate determination is crucial for the design of any gas injection process especially at reservoir condition. In this study, an axisymmetric drop shape analysis (ADSA) was utilized to measure the equilibrium IFTs between crude oil and N2 at different temperature levels... 

Injecting low salinity brines is regarded as an enhanced oil recovery (EOR) process through IFT reduction. However, the exact mechanism behind this process is an unsettled and complex issue that has not been well understood yet, especially for heavy crude oil system. Besides, limited information is available regarding the key heavy oil/brine interfacial tension (IFT). The present study aims to investigate the sensitivity of dead heavy crude oil/brine IFT to a wide range of properties/conditions and to reveal the underlying physicochemical mechanisms involved in enhanced oil recovery and IFT reduction by low salinity water injection into heavy oil reservoir. IFT was measured as a function of... 

Although most heavy oil reservoirs contain discontinuous shaly structures, there is a lack of fundamental understanding how the shaly structures affect the oil recovery efficiency, especially during surfactant flooding to heavy oils. Here, an experimental study was conducted to examine the effect of discontinuous shales on performance of surfactant flooding by introducing heterogeneities to represent streaks of shale in five-spot glass micromodels. Results show that oil recovery in presence of shale streak is lower than in its absence. Based on the authors' observations, the presence of flow barriers causes premature breakthrough of injected fluids and also an unstable displacement front. As... 

The main purposes of this study were to scrutinize experimentally effects of polymer and rock types on the oil recovery using water and polymer flooding processes. Four dynamic flooding experiments were carried out at simulated reservoir condition of temperature and pressure. According to the obtained results, the ultimate oil recovery by water flooding in highly fractured reservoirs was less than reservoirs with the microfractures. The results of polymer flooding showed that in addition the polymer molecular weight, the sulfonation of polymers also affects the oil recovery  

During miscible displacements in fractured porous media, one of the most important factors that plays a significant role in oil production is the matrix-fracture interaction. In this work, a series of hydrocarbon injection experiments have been performed on a fractured glass micromodel that was designed specifically to study matrix-fracture interaction. A high quality image analysis method was used to determine the fluid flow behavior, solvent front movement, and viscous fingering associated with solvent movement in matrix and fractures. Observations showed that in the case of unit viscosity ratio, the injection rate increased the slope of recovery curve and consequently improved the final... 

Dilute Surfactant flooding has been recognized as one of the significant processes in chemical flooding. Many oil reservoirs became appropriate candidates for surfactant/water flooding when screening criteria was developed. Injected surfactant tried to mobilize the residual oil that was trapped in interstice. The main contributing mechanism to enhance oil recovery by surfactant flooding was defined as rock wettability alteration. Wettability is one of the substantial parameters to choose the best approach for a successful surfactant flooding in which tiny change in wettability will lead to improve oil recovery fundamentally. In this experimental study the effect of different aging time and... 

Alkaline-Surfactant-Polymer flooding is one of the most novel chemical enhanced oil recovery methods in the petroleum industry. This method has attracted interest due to its remarkable advantages. In this work, a series of ASP floods are conducted on fractured/non-fractured carbonate rocks. The performance of the tests was investigated by various ASP floods consisting of five types of polymers, two surfactants and one common alkaline. ASP was flooded simultaneously and sequentially in four defined scenarios after water flooding. The results showed that although using hydrolysed polymers increases the recovery factor in the fractured medium, sulfonated polymers increase oil recovery even more... 

A newly-designed surfactant was formulated to tolerate the harsh conditions of oil reservoirs, including high salinity of the formation brine and temperature. The specific emulsion and interfacial tension (IFT) behavior of this new surface active agent were investigated by performing emulsion stability tests, emulsion size analysis, and IFT behavior in the presence of four different types of alkalis. Image processing was utilized to analyze the droplet size distribution using microscopic images of the samples. The results show that depending on the composition of the mixtures, the optimum phase region and interfacial tension behavior change considerably. Solutions containing a higher... 

Spontaneous imbibition, the capillary-driven process of displacing the nonwetting phase by the wetting phase in porous media, is of great importance in oil/gas recovery from matrix blocks of fractured reservoirs. The question of how properly scaling up the recovery by counter-current spontaneous imbibition has been the subject of extensive research over decades, and numerous scaling equations have been proposed. As a convention, the scaling equations are usually defined analytically by relating the early time squared recovery to squared pore volume. We show this convention does not apply to common scaling practices and, if used, causes nontrivial scatter in the scaling plots. We explain that... 

Finger initiation/development at fluid-fluid interface during miscible floods can cause poor displacement efficiency, which is undesirable in enhanced oil recovery processes. In this work, a series of hydrocarbon injection experiments performed on 5-spot glass micromodels that were initially saturated with the heavy crude oil. The fractured micromodels with different fracture geometrical characteristics were used in the tests. High quality image analysis was applied to determine the fluid flow behavior, solvent front movement, and viscous fingering associated with solvent movement in matrix and fractures. Observations showed that higher solvent dispersion in the fractures rather than matrix... 

It is well known that the displacement efficiency of EOR processes is mainly affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of pores surfaces remains a topic of debate in the literature. Furthermore, a little is known about how the dispersed silica nanoparticles affect the microscopic/macroscopic recovery efficiency of heavy oils during common immiscible EOR processes such as water flooding. In this study, a series of injection experiments was performed on five-spot glass micromodel which is initially saturated with the heavy oil. Distilled water and dispersed silica nanoparticles in water (DSNW) at different values of weight percent... 

Most of the heavy oil reservoirs contain discontinuous shale which affects fluid flow through porous media as well as recovery efficiency during enhanced oil recovery processes. However, the role of shale geometrical characteristics (including orientation, length, discontinuity, and spacing of the shale) on oil recovery remains a topic of debate in the literature, especially during miscible injection of heavy oils and five-spot systems. Here, a series of hydrocarbon solvent injection tests have been performed on various five-spot glass micromodels containing barriers which are initially saturated with heavy oil under fixed flow rate conditions. Oil recoveries as a function of pore volumes of... 

Spontaneous imbibition of water into the matrix blocks because of capillary forces is an important recovery mechanism for oil recovery from naturally fractured reservoirs. In modeling this process, it has been assumed classically that local equilibrium is reached and, therefore, capillary pressure and relative permeability functions are only a function of water saturation, resulting in the appearance of the self-similarity condition. In some works published in the last 2 decades, it has, however, been claimed that local equilibrium is not reached in porous media, and therefore, opposite the classical local-equilibrium/self-similar approach, non-equilibrium effects should be taken into... 

The vapor extraction process (or VAPEX) uses vaporized solvents injected into a horizontal well to form a vapor chamber within the reservoir. Vapor dissolves in the oil and enhances the oil production by decreasing the oil viscosity in heavy oil reservoirs. To evaluate the process we conduct a simulation study on an Iranian heavy oil reservoir called Kuh-e-Mond. In addition, a semi-analytical investigation of the VAPEX process has been performed. The idea is to perform VAPEX simulation for a laboratory model and find a methodology to compare the results of the simulator with the semi-analytical Butler's model. In particular, a semi-analytical dimensionless correlation for production rate... 

Water and miscible gas injection scenarios are considered in an Iranian oil reservoir for the purpose of recovery improvement. Firstly reservoir fluid modeling and modeling of a slim tube test were performed. Then, water alternating gas (WAG) injection was evaluated by optimizing the WAG half cycle and WAG ratio. Alternatively, hybrid WAG and separate injection of water and gas in the top and bottom of the reservoir were also investigated. The numerical simulation results showed that the optimum WAG, with half cycle of 1.5 years and WAG ratio of one, gave the highest recovery factor. Moreover, economic evaluation of these scenarios indicated that WAG had the highest net present value and was...