Sharif Digital Repository

The effect of the nucleating agent masterbatch carrier resin on the nonisothermal crystallization of a pipe-grade polypropylene block copolymer was investigated at three different cooling rates using differential scanning calorimetry (DSC). Bis(3,4-dimethylibenzylidene) sorbitol (DMDBS), a well-known, third-generation sorbitol derivative, was used as a nucleating agent in this study. Crystallization kinetic parameters obtained from DSC cooling curves showed that incorporation of a nucleating agent by means of a masterbatch increased the crystallization rate by approximately two times compared to that of the sample with the same concentration of nucleating agent without the use of a... 

Photocatalytic membrane reactors (PMRs), coupling photocatalysts and membranes in a single system, have shown a considerable potential to reduce membrane fouling, which is one of the major drawbacks of using membranes to treat water and wastewater. In this study, the visible light-activated photocatalysts were incorporated into the polyacrylonitrile (PAN) casting solution to synthesize the photocatalytic composite membranes. The physicochemical properties and the morphology of the membranes and photocatalysts were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction analysis (XRD), ultraviolet–visible diffuse reflectance... 

The high aspect ratio and unique thermal and electrical characteristics of carbon nanofiber (CNF) made it an ideal physical barrier against the penetration of corrosive ions. However, the poor compatibility of the CNF with the polymer matrix and the lack of active corrosion inhibitors are the key limitations of this nanomaterial, resulting in short-term anti-corrosion resistance. An intelligent self-healing epoxy (EP) coating, including CNF modified with a polydopamine (PDA)-La3+ complex, was successfully fabricated to overcome these issues. Electrochemical impedance spectroscopy (EIS) evaluation implied that mild steel (MS) submerged in a 3.5 wt % NaCl solution containing the CNF-PDA-La... 

In this study, the effects of unmodified calcium zinc phosphate (UCZP) and modified calcium zinc phosphate (MCZP) nanopigments (NPs) on the rheological, mechanical, and corrosion protection performance (CPP) of the epoxy (EP) coatings were investigated. Transmission electron microscopy (TEM) coupled with energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were used to study morphology and overall chemical structure of synthesized calcium zinc phosphate (CZP) NPs, respectively. The grafting of methyltriethoxysilane (MTES) molecules on the surface of CZP was assessed using Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and... 

Herein, a series of superhydrophobic thin polyacrylic resin-coated carbon black (CB)/hexagonal boron nitride (h-BN)@Fe3O4/cellulose composite papers with good flexibility, low density (~0.67 g/cm3), high electrical conductivity (~0.065 S/cm), good thermal conductivity (0.462 W.m−1. K−1), and with water contact angle (WCA) of 153° were successfully fabricated by a facile dip-coating/spraying method. The CB-BN@Fe3O4 distribution in cellulose matrix provided high electrical conductivity in the in-plane and thickness directions. The electrical conductivity in both in-plane and thickness directions increased by increasing the number of vacuum-assisted dip-coating cycles. Moreover, these... 

Herein, we demonstrated a facile method for the fabrication of magnetic and superhydrophobic polyurethane sponge with water contact angle of 159° as an adsorbent for cleanup the marine oil spill pollution. For this aim, a polyurethane sponge was coated with carbon black (CB), hexagonal boron nitride (h-BN)@Fe3O4, and acrylic resin and then characterized by different techniques. Owing to the chemical and thermal stability of h-BN and CB, the modified sponge was stable under corrosive conditions (pH = 1–14 and salt solutions) and at different temperatures (−12 °C–105 °C). In addition to common oils and organic solvents, we also used the real spilled oils containing monoaromatics and... 

In this study, a novel idea was utilized for designing high performance bilayer absorber for X-band frequency. The microwave dissipation features of the bilayer structure absorbers with one-layer bare resin epoxy and the other epoxy resin filled with [CaTiO3/ZnFe2O4]@C nanocomposite as lossy filler were simulated with CST studio suite within 2–18 GHz. The lossy filler was successfully developed via chemical method. In the first step two distinct single layer absorbers of bare resin epoxy and resin epoxy filled with [CaTiO3/ZnFe2O4]@C nanocomposite ([CT/ZF]@C) were prepared and in the second step the measured electromagnetic parameters were considered as input data of CST studio suite for... 

In this study, nano-sized diamond particles (ND) were functionalized in two consecutive stages. First, dry thermal oxidation was employed to obtain carboxylated ND. In the next step, carboxylated ND was properly surface modified through wet chemistry to acquire aminated-ND (ND-NH2). Then, polyaniline (PANI) was synthesized in the presence of aminated-ND particles at a broad concentration from 1 wt% to 70 wt% to obtain PANI/ND hybrid nanostructures. The chemical structure, morphology, and thermal stability of nanoparticles were comprehensively characterized by different techniques such as FT-IR, UV–visible, TGA, XRD, FESEM, and TEM. It was observed that the morphology of PANI/ND... 

Herein, the NH2-UiO-66 metal organic framework (MOF) has been green synthesized with the assistance of high gravity to provide a suitable and safe platform for drug loading. The NH2-UiO-66 MOF was characterized using a field-emission scanning electron microscope, transmission electron microscope (TEM), X-ray diffraction, and zeta potential analysis. Doxorubicin was then encapsulated physically on the porosity of the green MOF. Two different stimulus polymers, p(HEMA) and p(NIPAM), were used as the coating agents of the MOFs. Doxorubicin was loaded onto the polymer-coated MOFs as well, and a drug payload of more than 51% was obtained, which is a record by itself. In the next step, pCRISPR was... 

In this study, for the first time, the influence of the nanoporous Zr-based NH2-UiO-66 metal-organic frameworks (MOFs) on the tensile strength and fracture toughness of the epoxy coating was investigated. In addition, the impacts of the UiO particles' functionality (i.e., NH2 or GMA) on the MOFs/epoxy interfacial bonding and nanoparticles dispersion quality in the epoxy resin were examined by the tensile test, dynamic mechanical thermal analysis (DMTA) and field emission-scanning electron microscope (FE-SEM). The NH2-UiO-66 and GMA-UiO-66 MOFs chemical structures were investigated by FT-IR, BET, and FE-SEM approaches. The FE-SEM investigation of the fracture morphology (at the cross-section... 

For the first time, the UIO-66, NH2-UIO, and NH2-UIO particles covalently functionalized by Glycidyl Methacrylate (GMA@NH2-UIO), were utilized as the novel functional anti-corrosive fillers. The functionality, high surface area, phase composition, excellent thermal properties as well as chemical stability of the Zr-MOFs were proved by FT-IR, BET, XRD, TGA, and water stability tests, respectively. The smart pH-sensitive controlled-release activity of the corrosion inhibitors (i.e., Zr ions and organic compounds) from the prepared Zr-MOFs was proved by the water stability test of the Zr-MOFs particles in the acidic (pH = 2), neutral (pH = 7.5), and alkaline (pH = 12) solutions containing 3.5... 

Graphene-based carbon hollow spheres (CHSs) fabrication, doped with 2-mercaptobenzimidazole (MBI) was successfully done in previous work. The active/barrier corrosion protection performance (CPP) of epoxy coatings was evaluated using salt spray test, electrochemical impedance spectroscopy (EIS), and scanning vibrating electrode technique (SVET). Results proved the active/barrier CPP enhancement of epoxy coatings in the presence of 3 wt. % MBI@CHSs. While the presence of MBI and empty CHSs in epoxy coatings did not further improve the active performance. An improvement in the adhesion loss of the epoxy coating, ca. 58 %, was observed in the presence of 3 wt. % MBI@CHSs. © 2021  

In this study, a novel inorganic/organic hybrid pigment based on zinc cations/Ferula Asafoetida leaves extract (Zn-FALE) was synthesized, and its corrosion protection properties were investigated in a saline solution and an organic coating. Interactions of components between Zn2+ cations and FALE were assessed by thermo-gravimetric analysis (TGA) and ultraviolet-visible (UV–visible) spectroscopy. Corrosion inhibitive performance of FALE and Zn-FALE pigments in the solution phase and coating phase was studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). TGA and UV–visible results revealed the proper chelation between inorganic and organic components of... 

This survey addresses the non-polynomial framework for bending responses of three-phase multi-scale hybrid laminated nanocomposite (MHLNC) reinforced circular/annular plates (MHLNCRCP/ MHLNCRAP) based upon the three-dimensional theory of elasticity for various sets of boundary conditions. The sandwich structure with two, three, five, and seven layers is modeled using compatibility conditions. The state-space based differential quadrature method (SS-DQM) is presented to examine the bending behavior of MHLNCRCP/ MHLNCRAP by considering various boundary conditions. Halpin–Tsai equations and fiber micromechanics are used in the hierarchy to predict the bulk material properties of the multi-scale... 

Graphene reinforced polymer derived carbon (carbon/graphene) aerogels were synthesized by carbonization of novolac/graphene oxide aerogels. Novolac/graphene oxide aerogels were synthesized using solvent-saturated-vapor-atmosphere technique. To this aim, 20 wt% solution of novolac resin with 0, 2, and 5 wt% graphene oxide in 2-propanol were made and were cured in an autoclave. Wet aerogels were dried in air and were carbonized at 800 °C in nitrogen atmosphere. Eliminating the time-consuming methods of drying like supercritical and freeze drying is one of the advantages of this method of synthesis of organic aerogles. Fourier transform infrared spectroscopy, field emission scanning electron... 

A surface to separate oil–water mixtures is a global concern and highly needed particularly in oil industries. The present study was conducted to create a novel superhydrophilic/superoleophobic nanocomposite coating on the stainless-steel mesh for the aim of oil/water separation. Different hydrophilic resins along with PFOA as oleophobic agent with 15 flours in its chemical structure and various oxide nanoparticles containing SiO2 and TiO2 at different concentrations were studied to achieve superhydrophilic/superoleophobic surface. The fabricated nanocomposites were fully characterized via field-emission scanning microscopy (FESEM), atomic force microscopy (AFM) and Fourier-transform... 

Here, an excellent superhydrophobic and highly oleophobic nanocomposite coating composed of fluoroethylene-vinyl ether (FEVE) resin as a matrix for modified SiO2 nanoparticles was synthesized on a stainless-steel wire mesh substrate via a facile sol-gel method. The surface morphology, microstructure, composition, and roughness of the coatings were investigated by field emission scanning electron microscopy (FESEM) equipped with energy-dispersive spectroscopy (EDS) and atomic force microscopy (AFM). The most efficient coating with superhydrophobicity and high oleophobicity feature indicates the water and oil repellency with contact angles (CAs) of 152° and 141°, respectively, with the high... 

Polymer concrete is well-known for quick repairing of concrete structures and pavement. However, there are relatively few studies on the durability of epoxy polymer concrete (EPC). This study aims to investigate the long-term environmental effects on the mechanical properties of EPC. Therefore, EPC and ordinary cement concrete (OCC) specimens were prepared and exposed to four chemical solutions with pH values of 2.5, 7, 12.5 and artificial seawater in intervals of 1, 3, 6, 9 and 12 months. Epoxy resin (10 and 12% by weight) and Portland cement were used as binder phase in EPC and OCC specimens, respectively. Scanning electron microscopy (SEM) was additionally applied to investigate the... 

In this paper, two types of carbon black (CB) masterbatch with different carriers, i.e. HDPE and LDPE, are used to produce black compounds using three PE100 resins with various short chain branching distributions. Due to difference in short chain branch (SCB) distribution, the used polyethylene resins behave differently in microstructure development and long-term creep behavior. The microstructural analysis using different DSC techniques and rheological measurements revealed more sensitivity of the polyethylene resin with uniform comonomer distribution to the carbon black aggregates and their polymeric carriers. The Full Notched Creep Test (FNCT) was performed to determine the long-term... 

In this study, a novel inorganic/organic hybrid pigment based on zinc cations/Ferula Asafoetida leaves extract (Zn-FALE) was synthesized, and its corrosion protection properties were investigated in a saline solution and an organic coating. Interactions of components between Zn2+ cations and FALE were assessed by thermo-gravimetric analysis (TGA) and ultraviolet-visible (UV–visible) spectroscopy. Corrosion inhibitive performance of FALE and Zn-FALE pigments in the solution phase and coating phase was studied using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). TGA and UV–visible results revealed the proper chelation between inorganic and organic components of...