Sharif Digital Repository

Because of the complex nature of carbonate reservoirs, the required conditions for effective Low Salinity Water Flooding (LSWF) in these reservoirs need further and in depth investigation. In the present study, three calcite cores, i.e. Cal-1, Cal-2, and IL, with the same chemical composition are subjected to tertiary low salinity water flooding (LSWF), while the crude oil and composition of flooding brine kept the same. The experimental results show significant difference in the amount of enhanced oil recovery, as IL had the most additional oil recovery (20.8 % of IOIP), followed by Cal-2 (10.5 % of IOIP) and Cal-1 (3.9 % of IOIP). The results of contact angle, zeta potential, and effluent... 

The main idea behind the application of Low salinity polymer flooding (LSPF) enhanced oil recovery (EOR) method is that diluted brine improves the oil recovery by wettability alteration from oil-wet (OW) towards water-wet (WW) condition, while polymer enhances the mobility of the displacing phase. However the possible effect of polymer on the fluid/fluid and fluid/rock interactions are not investigated systematically in the literature. The main objective of the present reserach is to examine the possible effect of hybrid application of low-salinity and polymer on the brine/rock and brine/oil interfaces properties. Formation water (FW) and sea water (SW) and its two different dilutions, i.e.... 

The high aspect ratio and unique thermal and electrical characteristics of carbon nanofiber (CNF) made it an ideal physical barrier against the penetration of corrosive ions. However, the poor compatibility of the CNF with the polymer matrix and the lack of active corrosion inhibitors are the key limitations of this nanomaterial, resulting in short-term anti-corrosion resistance. An intelligent self-healing epoxy (EP) coating, including CNF modified with a polydopamine (PDA)-La3+ complex, was successfully fabricated to overcome these issues. Electrochemical impedance spectroscopy (EIS) evaluation implied that mild steel (MS) submerged in a 3.5 wt % NaCl solution containing the CNF-PDA-La... 

More than 80% of desalination plants use the multi-stage flash (MSF) technology in the Persian Gulf and hence may have a severe irreversible impact on the marine environment. In the present study, geometrical, mixing, and turbulence characteristics of thermal-saline jets, similar to MSF effluents, are numerically investigated using the dynamic Smagorinsky sub-grid scale (SGS) model and UNESCO equation of state. For this purpose, two affecting dimensionless parameters are considered: (1) density ratio, which is thermal flux to salinity flux ratio, and (2) salinity Froude number. Examining the effects of density ratio reveals that the jet flow pattern only depends on the density ratio with a... 

The slow kinetics of wettability alteration toward a more water-wetting state by low-salinity waterflooding (LSWF) in oil-brine-rock (OBR) systems is conjectured to be pertinent to the electrokinetic phenomena in the thin brine film. We hypothesize that the nanoscale physicochemical heterogeneities such as surface roughness and surface charge heterogeneity at the rock/brine interface control further the dynamics of electrodiffusion and electrostatic disjoining pressure (Πel), thus the time-scale and the magnitude of the low salinity effect (LSE). In this regard, film-scale computational fluid dynamics (CFD) simulations were performed. The coupled Poisson-Nernst-Planck (PNP) equations were... 

In situ mixing by dispersive transport of salt and viscous fingering between the injected low-salinity (LS) brine and high-salinity (HS) formation brine can jeopardize the performance of low-salinity waterflooding (LSWF). In our previous papers, we demonstrated that in situ mixing can be suppressed by polymer-enhanced low-salinity waterflooding (PELS), in which a small amount of a viscosifying agent, such as a polymer, is added to the LS stream. Nevertheless, effective mixing control with PELS depends upon several factors and operational conditions, which have not yet been addressed. Therefore, this research focuses on the investigation of the impact of injection parameters, such as the... 

Wettability alteration as the main mechanism of improved oil recovery in carbonates during low salinity/engineered water flooding (LS/EWF) is a complex phenomenon due to high heterogeneity of rock. During LS/EWF, wettability changes when electrochemical interactions at carbonate-brine interface happen. Anhydrite impurity in carbonates is one of the most important parameters affecting the electrochemical interactions at the rock-brine interface and the wettability alteration process. Therefore, the success of LS/EWF in carbonate reservoirs lies in perceiving the role of impurities such as anhydrite, from a geochemical and dissolution point of view. Modified flotation tests (MFT) were... 

In this research, for the first time, the effect of primary particles (boulders) and secondary particles (fines) in organic mixtures of coffee, black walnut hull, madder, and tea (which are cheap, abundant, and biodegradable) on the improvement of solar stills' daily efficiency is evaluated as an alternative to metal-based nanofluids. A laboratory still simulator is utilised under laboratory conditions to measure the organic mixture's behaviour accurately. Furthermore, the effect of the concentration of organic mixtures and the particle size of organic materials are investigated, as well as the effect of boulders and fines, independently. In addition, two identical solar still systems are... 

The interaction between a lake and groundwater has important implications to the quantity and quality of water in both environments. Quantification of lake-groundwater interaction (LGI) has been challenging in regions with limited in-situ data. LGI can be quantified by physically-based models, direct measurement of seepage, measurements of conservative chemical or isotopic tracers, and lake water balance. Despite the accuracy of the methods based on hydrochemical or isotopic measurements and analysis, they require extensive field data that are costly to collect in large lakes. Instead, the data required to quantify LGI by the lake water budget method can be obtained via typical ground... 

Freshwater scarcity in conjunction with population expansion puts human survival in doubt. Throughout the world, millions of people are deprived of clean and safe drinking water. The development of novel technologies to desalinate water is among the most valuable studies for humanity. Receiving benefits from low energy consumption, high environmental capability, and low-production cost, capacitive deionization (CDI) received significant attention in saline water desalination. Rational design of efficient electrode materials by tailoring their structural and compositional properties, therefore, plays a pivotal role in achieving high-performance CDI systems. Hollow carbon spheres (HCSs) with... 

Natural soils contain a certain amount of salt in the form of dissolved ions or electrically charged atoms, originated from the long-term erosion by acidic rainwater. The dissolved salt poses an extra osmotic water potential being normally neglected in laboratory measurements and numerical analyses. However, ignorance of salinity may result in overestimation of stability, and the design may not be as conservative as thought. Therefore, this research aims to first experimentally examine the influence of pore water salinity on water retention curve and saturated permeability of natural dispersive loess under saline and desalinated conditions. Second, the measured parameters are used for... 

Clay liners are widely used as porous membrane barriers to control solute transport and to prevent the leakage of leachate both in horizontal and vertical flow scenarios, such as the isolated base and ramps of sanitary landfills. Despite the primary importance of saturated hydraulic conductivity in a reliable simulation of fluid flow through clay barriers, there is no model to predict hydraulic conductivity of clayey soils permeated with saline aqueous solutions because most of the current models were developed for pure water. Therefore, the main motivation behind this study is to derive semi-empirical models for simulating the hydraulic conductivity of clayey soils in the presence of... 

Public concern over environmental issues such as ecosystem degradation is high. However, restoring coupled human-natural systems requires integration across many science, technology, engineering, management, and governance topics that are presently fragmented. Here, we synthesized 544 peer-reviewed articles published through September 2020 on the desiccation and nascent recovery of Lake Urmia in northwest Iran. We answered nine questions of scientific and popular interest about causes, impacts, stabilization, recovery, and next steps. We find: (1) Expansion of irrigated agriculture, dam construction, and mismanagement impacted the lake more than temperature increases and precipitation... 

Despite many attempts to study the interaction of fluids in low-salinity flooding, they do not examine the principles of interphasic transition phenomena. This study aims to provide a new understanding of liquid–liquid interactions during the low-salinity water interaction through a series of experiments on the oil, emulsion, and aqueous phase. Three samples of crude oils with different asphaltene concentrations and structures with known physical properties are in contact with different solutions. The brine pH, conductivity, and crude oil viscosity experiments before and after contacting the oil with brine showed that the heteroatom concentration and compaction of crude oil asphaltene... 

This study aims at analyzing the performance of three units known as low salt rejection reverse osmosis (LSRRO), split-feed counterflow reverse osmosis (SF-CFRO), and split-brine counterflow reverse osmosis (SB-CFRO) and implementing them in a modified multi-stage multi-feed counter-current membrane with cascade recycle for dewatering hypersaline streams to the salinity appropriate for crystallizers' feed. Exergy and primitive pinch analysis showed that dewatering is limited in SF-CFRO as the permeate inlet dictates the maximum salinity difference at the pinch point as well as high frictional pressure loss in the permeate channel. SB-CFRO and LSRRO units can reach high salinities by... 

Understanding of how anthropogenic droughts occur in socio-hydrological systems is critical in studying resilience of these systems. This is especially relevant when a “lock-in” toward watershed desiccation occurs as an emergent outcome of coupling among social dynamics and surface and underground water processes. How the various processes collectively fit together to reinforce such a lock-in and what may be a critical or ignored feedback worsening the state of the socio-hydrological systems remains poorly understood. Here we tackle this gap by focusing on the case of Lake Urmia in Iran, a saline lake that faces the same fate as that of Aral Sea due to over-extraction of water sources that... 

Abstract: The convection–diffusion process of carbon dioxide (CO2) dissolution in a saline reservoir is investigated to shed light on the effects of the permeability heterogeneity. Using sequential Gaussian simulation method, random permeability fields in two and three-dimension (2D and 3D) structures are generated. Quantitative (average amount of the dissolved CO2 and dissolution flux) and qualitative (pattern of the dissolved CO2 and velocity streamlines) measurements are used to investigate the results. A 3D structure shows a slightly higher dissolution flux than a 2D structure in the homogeneous condition. Results in the random permeability fields in 2D indicates an increase in the... 

Spontaneous imbibition of water from fracture into the matrix is considered as one of the most important recovery mechanisms in the fractured porous media. However, water cannot spontaneously imbibe into the oil-wet rocks and as a result oil won't be produced, unless the capillary pressure barrier between fracture conduits and matrix is overcome. Wettability alteration is known as the main affecting mechanism for low salinity water flooding (LSWF), however, its effectiveness in fractured porous media has been less investigated, especially in the case of possible pore scale displacement mechanisms. In this study, the effectiveness of LSWF (diluted seawater) on oil recovery is compared to the... 

Introduction: Biodegradation of azo dyes under harsh environmental conditions has been of great interest for the treatment of colored effluents. The present study aims to evaluate Klebsiella quasipneumoniae GT7 for degrading azo dye Carmoisine under extreme pH conditions and high salinity. Materials and Methods: The growth profiles of bacteria were compared under different conditions of salinity and pH, using the optical density and viability measurements. Kinetic patterns of decolourization by GT7 were investigated under different concentrations of NaCl and/or pH, through the spectrophotometry method. Moreover, thin layer chromatography (TLC) was used to evaluate the biotransformation of... 

Photothermally heated and mesh-gridded membrane distillation (PHMD) system is proposed for desalination of high saline aqueous solutions. A triple-layered membrane, composed of a photothermal top nanofibrous layer containing polyacrylonitrile and dispersed carbon black nanoparticles and a polyvinylidene fluoride porous membrane supported on a nonwoven polyester, was prepared. A polypropylene mesh was used to hold the membrane. A 3D numerical simulation of the PHMD system was carried out by COMSOL and the appropriate length of the membrane module was determined. The effects of various operating parameters including solar radiation intensity on the permeate flux and thermal efficiency were...