Sharif Digital Repository

In this paper we study and present an in-depth analysis on the operability and the viability of a typical wireless optical CDMA (OCDMA) local area network. Three receiver structures for OCDMA systems, using optical orthogonal codes (OOC) with minimum auto and cross-correlations as signature sequence, namely, correlation, correlation with hard-limiter, and chip-level detection are studied and proposed for such a network. For the synchronization circuit design the performance of two algorithms for OOC based OCDMA networks, namely, simple serial-search and multiple-shift in the context of wireless OCDMA LAN are studied. Furthermore, we study a synchronization method based on matched filtering... 

Access to a computational tractable method for representing the system more realistically has always been an important issue in power system reliability assessment. The Post Optimal Analysis (POA), as a well recognized technique to attack a set of similar optimization problems, has been successfully used to assess the reliability of composite systems. This method exploits the similarity of the system states to speed up the contingency evaluation procedure without sacrificing the accuracy of the results. In this paper, the performance and practical feasibility of the POA technique for power system reliability evaluation is tested using the Iran power grid. The POA based approach is applicable... 

It has been shown that one kind of poly silicon particles with sizes ranging from 10-500 nm, can be used in oilfields to enhance the oil recovery of water injection by 15-20%. The contributing mechanism might be reducing the interfacial tension which appears through improving relative permeability of the oil-phase. However, fundamental understanding of how hysteretic behavior of relative permeability curves affected by nanosilica particles remains a topic of debate in the literature. In this study, water as well as water dispersed nanosilica particles floods was performed on sandstone rock sample saturated by light crude oil supplied from one of Iranian oil reservoir, and the relative... 

Petroleum production often involves simultaneous flow of three immiscible fluids through underground porous rock formation. In this work, we measure two- and three-phase relative permeabilities with which we examine the performance of various 3-phase relative permeability models. The rock-fluid systems used in these measurements are comprised of sandstone samples, oil (n-decane), water (Nacl, 6000. ppm) and gas (nitrogen). The measurements were carried out at 23 ± 1 °C and 5.44 MPa. Two- and three-phase relative permeability measurements were obtained using the steady-state technique. The three-phase experiments were conducted such that the flow rates of brine and gas were increased... 

A fast high-performance liquid chromatography-diode array detection (HPLC-DAD) approach combined to solid phase extraction (SPE) as a pre-concentration step is developed for simultaneous determination of five selected pharmaceuticals (carbamazepine, naproxen, diclofenac, gemfibrozil and mefenamic acid) in water samples. The effective factors on the efficiency of SPE procedure are optimized using faced-centered central composite design (FCCD). In addition, multi-response optimization by using Derringer's desirability function is used to find the optimum experimental conditions for extraction of analytes from well and river waters. Due to the complexity of water matrices and the presence of... 

Sol-gel based solid-phase microextraction fibers supported by a stainless steel wire were fabricated and employed for GC-MS determination of oxadiargyl in real samples. The fibers were based on four compounds with different polarity: polar and non-polar (end-capped) poly(dimethylsiloxane) (PDMS), polyethylene glycol (PEG), and poly(ethylene-propyleneglycol)-monobutyl ether (UCON). For this purpose, the surface of the stainless steel was initially modified by (3-mercaptopropyl) trimethoxysilane. The results of the modification procedure were evaluated by cyclic voltammetry and energy dispersive X-ray (EDX) spectroscopy. After the modification, four different sol-gel based SPME fibers with... 

In this work, asphaltene adsorption in a sandstone core sample under dynamic conditions and during miscible CO2 injection was studied using live oil sample which is close to real conditions in petroleum reservoirs. In order to investigate of damage in sandstone core sample by the deposited material such as asphaltene, the morphology analysis of sandstone core sample using scanning electron microscopic method was studied. Also analyses of the adsorbed material in sandstone core sample by Soxhlet extraction using an azeotrope mixture and with SARA method were performed. The experimental results show that by increasing the flow rate of injected CO2, the amount of asphaltene in retained material... 

A magnetic polyurethane (PU) nanocomposite was synthesized by an electrospinning technique and applied for isolation and preconcentration of fluoxetine from aquatic and biological samples. The nanocomposite was electrospun using a PU polymer solution containing the dispersed magnetic nanoparticles. The magnetic properties of iron nanoparticles, along with the use of an electrospinning technique, led to the formation of a suitable sorbent toward isolation of fluoxetine. The magnetic PU nanofibers could be subsequently removed from the sample solution by applying a permanent magnet. The scanning electron microscopy (SEM) image of the magnetic PU nanofibers confirms that their diameters are in... 

This technical note addresses the free vibration problem of an elastically restrained Euler–Bernoulli beam with rotational spring-lumped rotary inertia system at its mid-span hinge. The governing differential equations and the boundary conditions of the beam are presented. Special attention is directed toward the conditions of the intermediate spring-mass system which plays a key role in the solution. Sample frequency parameters of the beam system are solved and tabulated. Mode shapes of the beam are also plotted for some spring stiffnesses  

Although CO2 injection significantly increases the amount of oil recovered, it can cause asphaltene deposition in oil reservoirs. Asphaltene deposition leads to formation damage, in which treatment is a costly and problematic operation. In this work, impact of asphaltene precipitation and deposition during CO2 injection are investigated for recombined oil both in sandstone and carbonate core samples through dynamic flow experiments. Injection of oil and CO2 was performed simultaneously. Then, pressure drops along the core were recorded continuously to estimate permeability reductions during the experiments. Online viscosity of injected fluid was measured by a designed capillary viscometer.... 

A novel, simple and rapid spectrophotometric method for the determination of nitrophenol (NP) isomer mixtures based on the catalytic activity of gold nanoparticles is described. Gold nanoparticle (∼13 nm) solution was used to catalyze the reduction of NP isomers to aminophenols with an excess amount of NaBH4. The second-order data were obtained by spectrophotometrically monitoring the reduction process of NP isomers. So, multivariate curve resolution optimized by alternative least squares (MCR-ALS) was used to analyze such data. MCR-ALS, an appropriate second-order method, can exploit the so-called 'second order advantage' (the ability to determine in the presence of uncalibrated... 

Herein, we present the large scale fabrication of carbon nanotubes (CNT) electrodes supported on flexible polymeric sheets by subsequent multilayer inkjet printing of a silver layer for electrical connection, CNT layers as active electrode material and an insulation layer to define a stand-alone CNT active electrode area with high accuracy. Optical and electrochemical characterization using several redox mediators demonstrates the reproducibility of the electrode surfaces and their functionality even with a single inkjet printed CNT layer. These electrodes are targeted to the clinical sector for the determination of the antioxidant power (AOP) of biologically relevant fluids by... 

An effect-directed analysis (EDA) of fresh and artificially weathered (evaporated, photooxidized) samples of North Sea crude oil and residual heavy fuel oil is presented. Aliphatic, aromatic, and polar oil fractions were tested for the presence of aryl hydrocarbon receptor (AhR) agonist and androgen receptor (AR) antagonist, demonstrating for the first time the AR antagonist effects in the aromatic and, to a lesser extent, polar fractions. An extension of the typical EDA strategy to include an N-way partial least-squares (N-PLS) model capable of relating the comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry (GC × GC-TOFMS) data set to the bioassay data... 

A Bayesian framework for 3-D human pose estimation from monocular images based on sparse representation (SR) is introduced. Our probabilistic approach aims at simultaneously learning two overcomplete dictionaries (one for the visual input space and the other for the pose space) with a shared sparse representation. Existing SR-based pose estimation approaches only offer a point estimation of the dictionary and the sparse codes. Therefore, they might be unreliable when the number of training examples is small. Our Bayesian framework estimates a posterior distribution for the sparse codes and the dictionaries from labeled training data. Hence, it is robust to overfitting on small-size training... 

The details of the crystal structure of the recently discovered Y 3Ba5Cu8O18+δ (Y358) superconductor have been determined by ab initio density functional theory. Total energy calculation has been performed for three different suggested structures with different oxygen content. The structure with a center of inversion symmetry and the highest oxygen concentration has the lowest total energy. Thus, it is the best choice for the Y358 crystal structure. By investigating the detailed structure, it is seen that this compound is arranged either of YBa2Cu3O7 and YBaCu2O 5 or YBaCu2O5 and BaCuO2 substructural blocks in the c direction. The difference between the total energy of Y358 compound and the... 

Surface modified magnetic nanoparticles (M-NPs) were synthetized and stabilized in poly (vinylalcohol) solution. The solutions with various magnetic nanoparticles contents were gammairradiated and magnetic poly (vinyl-alcohol) (M-PVA) hydrogels were synthesized. The magnetic hydrogels and also the un-irradiated magnetic poly (vinyl alcohol) nanocomposite films were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), Fourier transform infrared spectroscopy (FTIR) and mechanical measurement. The M-NPs were uniformly dispersed in the polymer matrix due to a strong interaction between the surface-modified M-NPs and polymer matrix.... 

Body weight is influenced by both food intake and energy expenditure. Acylated ghrelin enhances appetite, and its circulating level is suppressed by Growth Hormone. Data on the acylated ghrelin responses to exercise of different intensities in obese individuals are currently not available. This study examined the effects of an intermittent exercise protocol on acylated ghrelin levels and hunger ratings in obese people. Nine inactive male ran on the treadmill at 0900 with progressive intensities of 50, 60, 70, and 80% of VO2max for 10, 10, 5, and 2 min respectively. Blood samples were collected before the exercise at 0845 (-15 min as the resting values), after each workload (10, 23, 31, and... 

This paper is devoted to the characterization of an extended family of continuous-time autoregressive moving average (CARMA) processes that are solutions of stochastic differential equations driven by white Lévy innovations. These are completely specified by: 1) a set of poles and zeros that fixes their correlation structure and 2) a canonical infinitely divisible probability distribution that controls their degree of sparsity (with the Gaussian model corresponding to the least sparse scenario). The generalized CARMA processes are either stationary or nonstationary, depending on the location of the poles in the complex plane. The most basic nonstationary representatives (with a single pole... 

In economic design of profiles, parameters of a profile are determined such that the total implementation cost is minimized. These parameters consist of the number of set points, n, the interval between two successive sampling, h, and the parameters of a control chart used for monitoring. In this paper, the Lorenzen-Vance cost function is extended to model the costs associated with implementing profiles. The in-control and the out-of-control average run lengths, ARL0 and ARL1, respectively, are used as two statistical measures to evaluate the statistical performances of the proposed model. A genetic algorithm (GA) is developed for solving both the economic and the economic-statistical... 

It is estimated that 20% of couples are infertile, and half of these infertility cases are linked to men. One of conditions that can affect male fertility is asthenozoospermia. We applied Raman spectroscopy to the analysis of the metabolome of the human seminal plasma, and used chemometrics on the patterns of Raman spectra obtained. Significant changes were observed in the metabolome of the human seminal plasma of asthenozoospermic patients