Sharif Digital Repository

In recent decades, metal nanoparticles have been used in medicine for example in cancer treatment. There have always been debates on the nanoparticles specifications such as particle size, amount of surface charge and the particle material. Meanwhile, the study on selecting appropriate properties of nanoparticles for this purpose is very essential and expensive in medical science. In order to access the best efficiency and the least mortality of the patients in treatments, simulation studies can support the medical scientists. In this thesis, the goal is to study transferring nanoparticles as a drug or included drugs through created hypothetical micro-channels in cancerous cells membrane.... 

Silver nanoparticles are widely used in different industries because of their antibacterial effects. Many synthesis methods were used to obtain silver nanoparticles. In this study the microwave method is used to synthesize nanosilver. This method is easier and faster in comparison to other methods. The effect of precursors’ concentrations, using different solvents, different remaining time in microwave and microwave power were studied. By increasing the reaction time, microwave power and using different solvents, nanosilver particle size varies from 2 nm up to 300nm. The TEM images, size distribution, XRD patterns and UV-visible spectrum are shown. The obtained nanosilver was used to observe... 

Recently, conductive nanocomposites have found great deals of attentions due to their vast applications in different fields. According to the definition of nanocomposite, the filler component should be in the range of 10-100 nm. In this study, silver nanoparticles was used as filler with 4 nm size and synthesized by microemulsion method that is known as the best approach for fabricating silver nanoparticles with small sizes, narrow size distribution and high stability.
Copoly (ortho-phenylenediamine/dopamine) was used as matrix component. Ortho-phenylenediamine is one of the conductive polymers that was used less than other conductive polymers such as polyaniline in this research area.... 

Dye-sensitized solar cells (DSSCs) have been intensively studied duringthe last decade as a promising third solar cellgeneration due to their potential low-cost manufacturingprocess. DSSCsare based on a semiconductor (i.e., TiO2), formed between a photo-sensitized anode and an electrolyte. In order to reach high conversion efficiencies, it isimportant to increase the electron injection and opticalabsorption. One promising solution to increase the electroninjection is to decrease the large band gap of TiO2 bydoping a foreign ion into TiO2 lattice.
In the present study, Ag- doped TiO2 powders and films with different Ag:Ti molar ratios are reported. The effect of dopant at.%, annealing... 

In the first part of this research, for the first time, we introduced a flexible high performance graphene-based supercapacitor using silver fiber fabric as the current collector. The silver fiber fabric offers remarkable advantages such as light weight, mechanical flexibility and ease of integration with electronic textiles, which well-suited for wearable energy storage devices. A new hybrid material of graphene-silver fiber fabric (rGO/SFF) was prepared through a facile electrophoretic deposition of graphene and being used as a binder-free flexible supercapacitor electrode. In order to obtain the optimum condition, the effect of deposition time was investigated and a duration time of 10... 

Dye-sensitized solar cells (DSCs) are third generation of solar cells, which composed of a porous layer of wide band gap semiconductor such as TiO2, covered with a molecular dye that absorbs sunlight, and a counter electrode contacted by a liquid redox electrolyte. Photovoltaic performance is the collective measure of light harvesting, charge separation and charge collection efficiencies. Light harvesting has a significant role in improvement of photovoltaic performance. Molecular engineering of dyes to improve absorption spectrum or to have a broad absorption spectrum,andlight scattering layes are approaches for this porpuse. This research is focused on photon management in DSCs using... 

Graphene is pure carbon in the form of a very thin, nearly transparent sheet, one atom thick. It is remarkably strong for its very low weight. Graphene is a novel particle that can improve adsorption properties. We use graphene for Iodine gas adsorption. Iodine-131 (usually in the chemical form of iodide) is a component of nuclear fallout, and is particularly dangerous owing to the thyroid gland's propensity to concentrate ingested iodine, where it is kept for periods longer than this isotope's radiological half-life of eight days. For this reason, if people are expected to be exposed to a significant amount of environmental radioactive iodine (iodine-131 in fallout), they may be instructed... 

The World Health Organization's annual statistics show that 83% of wounds are caused by bacterial infections. Diabetic ulcers affect approximately 28 million people worldwide. The use of antibacterial dressings can help control infections. Recent studies have found that electrical stimulation can accelerate wound healing. However, there is still a need for interventions that speed up epithelial tissue formation. New dressings with zinc and silver particles that have electrical activity are being developed, but research on these methods is limited. Zinc oxide nanoparticles have been used as antibacterial agents due to their unique surface properties. This research aims to use these... 

Bone scaffolds are used to regenerate bone tissue and accelerate bone healing, for this purpose, an attempt was made to prepare biocompatible, biodegradable, low toxicity and non-allergenic scaffolds to help increase osteogenesis and improve bone infections. A porous multi-component composite of chitosan, hydroxyapatite, graphene oxide functionalized with silver was made to make the desired scaffolds. At first, graphene oxide was functionalized by silver ions using silver nitrate. The structure of silver graphene oxide nanocomposite was confirmed by scanning electron microscope (SEM), Fourier infrared spectroscopy (FT-IR), and ultraviolet (UV-Visible) spectroscopy. In the next step, a... 

Developing an efficient visible-light-driven photocatalyst is believed to be a practical solution for clean energy and environmental remediation. The present study aimed to broaden current knowledge of the graphitic carbon nitride (g-C3N4)-based plasmonic photocatalysts by decorating polydopamine-grafted g-C3N4 (PDA/g-C3N4) with silver nanoparticles (AgNPs). The ternary nanocomposite was prepared using a facile synthesis method, while XPS and electron microscopy measurements confirmed the homogenous dispersion of AgNPs on PDA/g-C3N4. It was revealed that AgNPs successfully reduced the recombination rate of photoinduced electron-hole charge carriers. The calculated bandgap energy was... 

Silver and gold are precious, expensive metals and are used in various applications, such as jewellery and ornamentals, electronics and optics. In the present study, soda-lime glass surfaces firstly were activated with acidic stannous chloride solution. Then, silver and gold were coated on these surfaces via simultaneous spraying of two solution: A silver- or gold-complex bearing solution and a reducing agent (Dextrose for Ag and H2O2 for Au) bearing solution. For silver coating, the effect of various parameters such as time, reducing agent concentration, number of passes, presence and concentration of Urotrpin and Decamethylcyclopentasiloxane (DMCPS) as microstructural modifiers and... 

In this study, silver nanoparticles (Ag NPs) with different morphologies were synthesize by physical and chemical methods. Spherical silver nanoparticles were synthesized by electro magnetic levitation melting approach, while silver nanoplates and nanorods were prepared by chemical reduction route. Ag NPs were then coated with thin porous silica shell. The dissolution behavior of synthesized Ag@SiO2 was investigated in PBS at 25, 37 and 55 °C. Spherical and triangular Ag@SiO2 were conjugated by Penicillin G molecules. The silver and penicillin contents of the synthesized nano-antibiotics were determined by ICP-OES and TGA analyses. The nanoparticles were characterized by X-ray diffraction... 

The aim of this project is the synthesis and study of the photocatalytic activity of biphasic titanium dioxide loaded with Au@Ag@Au core double shell bimetallic nanoparticles. The creation of nanostructure, utilization of hierarchical biphasic morphology, loading of light-sensitive particles, and stabilization of photocatalytic particles have enhanced the titanium dioxide photocatalytic activity via approaches of (1) sensitization to visible light, (2) separation of charge carriers produced by light irradiation and minimization of their recombination, and (3) advancing reaction and absorption of reactants by increasing quantity and quality of surface active sites. Hierarchical TiO2... 

Silver nanopowder is of great importance for various medical and industrial applications. Due to the significance of the solubility of silver nanoparticles in these applications as well as the high impact of the nanophysical morphology of the powder on their solubility, we prepared nanoparticles with plate morphology by the chemical reduction of silver nitrate in a soluble phase. Then we measure its solubility in a phosphate buffer salt, which greatly resembles the human blood chemically. The size and shape of the resulting nanosilver powder and also the use of non-toxic materials in their synthesis are important factors in the production of nanosilver powder.We confirmed the successful... 

Electric field sensors are one of the common types of sensors that are widely used today to record changes in the electric field in underwater environments, also record pH changes in different materials. This type of sensor is inspired by the shark mucous membrane. In this study, silver / silver chloride silver (Ag / AgCl) was used for three methods of silver filtration directly in electrolyte containing chloride ion, Electrophoretic electrode method and electrode making method using silver oxide adhesive. Part of the electrodes manufacturing method involves converting part of silver into silver chloride. The made electrode has a length of 7 cm and a diameter of 0.5 mm, with its core made of... 

With the increase in the average age of the world's population, osteoporosis is a worldwide incidence. This disease, along with natural disasters, are important factors in the occurrence of fractures in various bones of the body. One of the methods for solving this problem and replacing with broken body bones is the use of metal implants with hydroxyapatite-based coatings. One of the common problems with using implants in the body is the infection in the adjacent parts of the implant. To overcome this problem, several studies have been carried out on the use of hydroxyapatite coatings with metal ions or antibacterial oxide compounds. In the present study, the influence of factors such as the... 

Silver is a resistant metal against the oxidation under normal atmospheric conditions, but it reacts readily with sulfur bearing species in the environment and corrodes. Alloying silver with more noble elements, such as Palladium, is a promising approach for increasing corrosion resistance against the sulfur pollutants. The purpose of this research is to develop a plating bath for deposition of Silver-Palladium alloy with acceptable appearance and higher corrosion resistance than pure silver. For this purpose, a bath based on thiosulfate complexing agent was investigated. In this solution, with a bath containing 10 mM of each cation, deposits with palladium content of 6, 11 and 14 % were... 

Transparent coatings with self-cleaning property in visible light spectrum, UV radiation resistance and antimicrobial are highly desirable. Titanium dioxide (TiO2) is used in this research has been widely studied as an efficient photocatalyst by researchers. In this research enhanced visible-light photocatalytic activity is gained with N and Ag co-doped titania. All samples were annealed at 450℃. Finally AgI was loaded TiO2 coating and the results were investigated. Peaks of XRD pattern wereattributed to different diffraction planes of anatase TiO2. Morphology of coatings were analyzed with using FE-SEM. Nano granis size of TiO2 and AgI loaded TiO2 were observed in FE-SEMimages. Nitrogen... 

Joining of yttria-stabilized zirconia (YSZ) to stainless steel (SS) is considered for various applications such as solid oxide fuel cells, thermal barrier coatings, and medical implants. In the present work, a series of brazing pastes utilizing silver and nickel nanoparticles (~80 nm) mixed with carboxymethyl cellulose as the organic phase were developed to join 5YSZ to 420 SS. The effects of processing parameters such as time and temperature of brazing and the composition of the paste on the microstructure of the joint and its mechanical strength were studied. The mechanism of interface formation was elaborated by scanning electron microscopy (SEM) and electron probe micro analyzer (EPMA).... 

The present work investigates joining of two MoSi2 parts through Cusil/Zr/Cusil interlayer with Cusil being a commercial eutectic of Ag-Cu alloy. The joining operation was implemented in an inert gas tube furnace by brazing. The brazing temperature ranged at 800-930°C while the operation lasted for 1hr. Interfacial microstructure was studied by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and X-Ray Diffraction (XRD) techniques. Applying the temperature of 830°C was led to uniform dense joint consisting of various reaction phases with excellent bonding within interfaces. Diffusion of Si to the liquid phase will transform MoSi2 to Mo5Si3 which bears Ag to some...