Sharif Digital Repository

A very efficient and mild procedure for the trimethylsilylation of a wide variety of alcohols, including primary, allylic, benzylic, secondary, hindered secondary, tertiary, and phenols with hexamethyldisilazane on the surface of silica gel dispersed with LiClO4 in room temperature at few minutes in excellent yields under neutral conditions is reported. This procedure also allows the excellent selectivity under LP-SiO2 system for silylation of alcohols in the presence of amine and phenolic hydroxy groups  

To the best of our knowledge, this work presents the first successful effort to fabricate and study nanostructured Ni-based composite coatings using the electrophoretic deposition method with nanostructured SiO2 particles. In this work, Ni/SiO2 nanoparticle composite coatings were prepared by electrophoretic deposition (EPD) [1] and their hardness, wear and corrosion resistances [2] were examined. After studying the morphology of the coatings and finding the optimum conditions for uniform coating, in order to improve the mechanical properties as well as resistance to corrosion, sintering was performed. The Ni/SiO2 nanocomposite coatings show excellent hardness (∼376 HV), reduced Young's... 

Perchloric acid immobilized on silica gel (SiO2-HClO4) has been utilized as a mild and cheap reagent for onepot preparation of different varieties of flavylium salts via tandem reaction of different acetophenones with Salicylaldehydes under solvent-free conditions. Different reaction conditions such as conventional heating and microwave irradiation have been investigated. The corresponding flavylium salts have been prepared in high yields. The procedure is milder and more convenient than the known procedures  

The application of bioglass coatings on metallic implants provides link between bone and materials and prevents corrosion of metallic implants in body fluid. Therefore, in this research, 45S5 bioglass-silica coatings on 316L stainless steel were prepared by the sol-gel method and were characterized by different techniques. According to X-ray diffraction (XRD) results, by sintering 45S5 bioglass at 600 C for 5 h, coatings containing both amorphous phase and Na2Ca2Si3O9 crystalline phase were obtained. Scanning electron microscopy (SEM) results showed that coatings prepared via appropriate sol aging and substrate preparations are crack-free. Potentiodynamic polarization tests in simulated body... 

In this research, bioactive glass (BG) of the type CaO-P2O 5-SiO2 and nanocrystalline forsterite (NF) bioceramic were successfully synthesized via sol-gel processing method. Heat-treatment process was done to obtain phase-pure nanopowders. After characterization of each sample, the nanocomposite samples were prepared by cold pressing method and sintered at 1000°C. The samples were fully characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR) analyses. The average nanocrystallite size was determined using the Debye-Scherrer's formula 19.6 nm. The bioactivity was examined in vitro... 

Wettability alteration in porous media is one of the mechanisms for enhancing oil recovery through injecting low-salinity water into carbonate reservoirs, in which active ions can remove the carboxylic oil component from the rock surface, altering the rock's wettability toward a water-wet condition. This study investigated the concomitant effects of low-salinity water and hydrophilic SiO2 nanoparticles on oil-wet dolomite rock. Results revealed that low-salinity water coupled with hydrophilic nano-SiO2 in oil-wet dolomite rock remarkably affected the wettability alteration of the rock, showing that the simultaneous presence of ions in water and hydrophilic nano-SiO2 led to considerable... 

The aim of this study was to evaluate the effects of applying low replacement ratios (0.75% and 1.50% of the binder weight) of nano-SiO2 particles with different specific surface areas (200 and 380 m2/g) on the properties of high-performance concrete (HPC). Mechanical (compressive and splitting tensile strengths), electrical resistivity, non-destructive (ultrasonic pulse velocity), and microstructural (mercury intrusion porosimetry, X-ray diffraction, and scanning electron microscopy) tests were conducted to investigate the macroscopic and microscopic effects of nano-SiO2 particles on HPC characteristics. The results indicated that the performance of nano-SiO2 particles significantly... 

The high hydration potential of CaO and MgO phases restricted the application of Mag-Dol refractory composites. In this study, the impact of nano-silica (SiO2) addition on the physical, mechanical, thermo-mechanical as well as microstructure of Mag-Dol refractory composites is investigated. Mag-Dol compositions were prepared by using calcined dolomite and magnesite particles (micron, 0–1, 1–3, 3–5, and 5–8 mm), liquid resin, and 0, 0.5, 1, 1.5, 2, and 2.5 wt% nano SiO2 as additives. Specimens were heated up to 1650 °C for the 3 h soaking period. Fired specimens were characterized by physical (apparent porosity, bulk density, and hydration resistance), mechanical (cold crushing strength), and... 

In this paper, with the aim of enhancing the thermal conductivity of the fluid, a nanofluid is prepared based on SiO2. A series of experimental tests were carried out for both laminar and forced convection regimes in a horizontal tube with two different geometric shapes (circular and square cross section) subjected to constant wall heat flux (4735 W m−2). A comparative study has been done to investigate the effect of the geometry on the convective heat transfer. Moreover, the effect of the volume concentration on the behavior of the nanofluid and the base fluid was evaluated by comparing various volume concentrations (0.05, 0.07 and 0.2%). The experiments were done under two different... 

Dynamic analysis of a concrete pipes armed with Silica (SiO2) nanoparticles subjected to earthquake load is presented. The structure is modeled with first order shear deformation theory (FSDT) of cylindrical shells. Mori-Tanaka approach is applied for obtaining the equivalent material properties of the structure considering agglomeration effects. Based on energy method and Hamilton's principle, the motion equations are derived. Utilizing the harmonic differential quadrature method (HDQM) and Newmark method, the dynamic displacement of the structure is calculated for the Kobe earthquake. The effects of different parameters such as geometrical parameters of pipe, boundary conditions, SiO2... 

This work studies the influence of surface modification of silica nanoparticles by mercaptopropyl trimethoxysilane on silica weight percent in Ni coating during electrodeposition. Results showed SiO2(CH2)3SH particles were embedded in the Ni coating up to 11%. Also, modified Guglielmi’s model and mechanicsm of nucleation of Ni-SiO2(CH2)3SH composite were studied. © 2017 The Electrochemical Society. All rights reserved  

In this study, a noble robust superhydrophobic and highly oleophobic polyurethane (PU)–SiO2 nanoparticle (NP) coating is specially designed using sol-gel process. For this purpose the effective parameters on surface tension and durability of the synthesized coating investigated and optimized. This new superhydrophobic and highly oleophobic coating exhibits good pensile hardness as high as 6H with adhesive force grade of 5B and repels water and oil with contact angles (CAs) of 159° and 140° respectively. The synthesized PU-SiO2 composite also retains an excellent amphiphobicity after a 7 days immersion in water with water and oil with CAs of 150° and 130°. Facile fabrication of PU–SiO2... 

Failure of concrete structures is usually accompanied by expansion of interior cracks due to stress concentration at the cracks tip. This phenomenon shows the importance of examination of the failure behavior of concrete structures. For this purpose, 4 types of concrete samples with different amounts of nano-SiO2 (0%, 0.2%, 0.5%, and 0.8%) were made to prepare some Central Straight-through Crack Brazilian Disk (CSCBD) specimens. The key focus of the investigation conducted was to investigate two assumptions. First, to check the pure mode I (tension) and pure mode II (shear) by compressing the standard discs with central cracks by an angle of 0° and 27° with respect to the loading axis;... 

In this study, novel chitosan/poly(vinyl alcohol) (PVA)/SiO2 nanocomposite ENMs were prepared to improve the mechanical strength and permeation properties of ENMs. The effect of various concentrations of SiO2 in the spinning solution (0, 0.5, 1.0 and 2.0 wt %) on the morphology, fiber diameter, porosity, thermomechanical properties, and permeability of the synthesized membranes was investigated. The prepared affinity membranes were utilized for the removal of dye from colored wastewater. Incorporating SiO2, as a reinforcing agent, was found to increase the compaction resistance of the nanocomposite ENMs. With the addition of 0.5 wt % of SiO2, the Young's modulus of the prepared membranes... 

In this paper, with the aim of enhancing the thermal conductivity of the fluid, a nanofluid is prepared based on SiO2. A series of experimental tests were carried out for both laminar and forced convection regimes in a horizontal tube with two different geometric shapes (circular and square cross section) subjected to constant wall heat flux (4735 W m−2). A comparative study has been done to investigate the effect of the geometry on the convective heat transfer. Moreover, the effect of the volume concentration on the behavior of the nanofluid and the base fluid was evaluated by comparing various volume concentrations (0.05, 0.07 and 0.2%). The experiments were done under two different... 

Enolizable ketones have been reacted in a one-pot method with aromatic aldehydes, acetyl chloride and acetonitrile at room temperature in the presence of SnCl4/SiO2 to furnish the corresponding β-acetamidoketones in improved yields. Acetylation of an aromatic hydroxyl group was observed while using 4-hydroxybenzaldehyde or vanillin and the corresponding β-acetamidoketones were isolated in an excellent yield  

The separation of water-oil mixtures has attracted widespread attention because of the increasing amounts of oily wastewater produced from the daily activities of humans and different industrial processes. Therefore, the development of facile and efficient oil-water separation technologies is imperative. In this work, a new highly superhydrophilic-superoleophobic coated stainless steel mesh was fabricated using virtue of the surface modification of poly (BzVimBr-Vim)@PFOA@SiO2 nanoparticles (NPs) through a facile preparation process. The new fabricated superhydrophilic and highly oleophobic coating exhibits good adhesive properties. The oil contact angle (OCA) and water contact angle (WCA)... 

In recent decades, utilizing of water-based muds (WBMs) in drilling oil and gas wells is ever increasing comparing to oil-based muds and synthetic-based muds due to the lower environmental issues. However, the main drawbacks with WBMs are rheological properties inefficiency and shale swelling which have caused attentions turn to improvement of WBMs’ rheological properties. In this study, the effects of various nanoparticles (NPs) namely titanium dioxide (TiO2), silicon dioxide (SiO2), and zinc oxide (ZnO) on improving rheological properties and shale recovery rate of a WBM sample at two temperatures (25 and 50 °C) were investigated. The concentrations of NPs in the base mud were set at 0.01,... 

This study demonstrates a novel, facile and one-pot approach to synthesize silica nanoparticles with silver at core and crust (SiNP-AgCC). A modified Stöber method was used to make SiNP-AgCC. A significant reduction in the size of SiO2 nanoparticles was seen, with 2–5 nm AgNPs being uniformly distributed on the surface and 10–20 nm AgNPs in the center. A typical mesoporous SiO2 particle (SiNP) produced using the Stöber method was transformed to nanoporous SiO2 by this modified Stöber method. Nanoporous SiO2 particles with silver in the center are advantageous for slow and consistent Ag+ release, which was confirmed by Ag+ ion release test. Antibacterial activities of the samples were tested... 

The modified Hummer technique was used in the preparation of graphene oxide (GO) nanosheets, and then SiO 2 decorated GO [GO(SiO 2 )] nanosheets were synthesized via the sol–gel method. Then, ultrahigh-molecular-weight polyethylene (UHMWPE) nanocomposites loaded with 0.5, 1, 1.5, and 2 wt % of GO(SiO 2 ) were prepared using magnesium ethoxide/GO(SiO 2 )-supported Ziegler–Natta catalysts via the in situ polymerization. Morphological study of the prepared polymer powders was assessed using field-emission scanning electron microscopy, which showed that GO(SiO 2 ) nanohybrids have been uniformly dispersed and distributed into the UHMWPE matrix. Also, the neat UHMWPE and its nanocomposites were...